• Atmosphere
• /
• v.30 no.4
• /
• pp.421-437
• /
• 2020

The effects of the terminal fall velocity-diameter relationship for raindrops, which is prescribed based on the measurement, on the simulated surface precipitation over Korea during summer season were investigated in our study. Two rainfall cases, 1-month summer precipitation and mesoscale rainfall, have been simulated using the Weather Research and Forecasting (WRF) model. The selected cloud microphysics parameterizations are WRF Single-Moment 5-class (WSM5) and WRF Single-Moment 6-class (WSM6) in the WRF model. The measured terminal fall-diameter relationship for raindrops by Gunn and Kinzer (1949) was applied in both WSM5 and WSM6. The sensitivity experiments with WSM5 and WSM6, applying the measured fall-diameter relationship, presents the different responses in simulated precipitation amount for the 1-month summer precipitation case. Precipitation increases with WSM5, thus enhancing the precipitation statistical skills. However, precipitation decreases with WSM6 leading to the deterioration of precipitation statistical skills. For the mesoscale rainfall case, precipitation increases with both WSM5 and WSM6, which further enhances the positive bias in precipitation amount.

• Nutrition Research and Practice
• /
• v.12 no.4
• /
• pp.275-282
• /
• 2018

BACKGROUND/OBJECTIVE: There is intense interest in soy isoflavone as a hormone replacement therapy for the prevention of postmenopausal osteoporosis. A new kind of isoflavone-enriched whole soy milk powder (I-WSM) containing more isoflavones than conventional whole soy milk powder was recently developed. The aim of this study was to investigate the effects of I-WSM on bone metabolism in ovariectomized mice. MATERIALS/METHODS: Sixty female ICR mice individually underwent ovariectomy (OVX) or a sham operation, and were randomized into six groups of 10 animals each as follows: Sham, OVX, OVX with 2% I-WSM diet, OVX with 10% I-WSM diet, OVX with 20% I-WSM diet, and OVX with 20% WSM diet. After an 8-week treatment period, bone mineral density (BMD), calcium, alkaline phosphatase (ALP), tartrate-resistant acid phosphatase (TRAP) 5b, osteocalcin (OC), procollagen 1 N-terminal propeptide (P1NP), and osteoprotegenin (OPG) were analyzed. RESULTS: BMD was significantly lower in the OVX group compared to the Sham group but was significantly higher in OVX + 10% I-WSM and OVX + 20% I-WSM groups compared to the OVX group (P < 0.05). Serum calcium concentration significantly increased in the OVX + 10% and 20% I-WSM groups. Serum ALP levels were significantly lower in the OVX + 10% and 20% I-WSM groups compared to the other experimental groups (P < 0.05). OC was significantly reduced in the OVX group compared to the Sham group (P < 0.05), but a dose-dependent increase was observed in the OVX groups supplemented with I-WSM. P1NP and OPG levels were significantly reduced, while TRAP 5b level was significantly elevated in the OVX group compared with the Sham group, which was not affected by I-WSM (P < 0.05). CONCLUSIONS: This study suggests that I-WSM supplementation in OVX mice has the effect of preventing BMD reduction and promoting bone formation. Therefore, I-WSM can be used as an effective alternative to postmenopausal osteoporosis prevention.

• Atmosphere
• /
• v.27 no.1
• /
• pp.17-28
• /
• 2017

The sensitivity of the typhoon track and intensity simulation to physics schemes of the global model are examined for the typhoon Bolaven and Tembin cases by using the Global/Regional Integrated Model System-Global Model Program (GRIMs-GMP) with the physics package version 2.0 of the Korea Institute of Atmospheric Prediction Systems. Microphysics, Cloudiness, and Planetary boundary Layer (PBL) parameterizations are changed and the impact of each scheme change to typhoon simulation is compared with the control simulation and observation. It is found that change of microphysics scheme from WRF Single-Moment 5-class (WSM5) to 1-class (WSM1) affects to the typhoon simulation significantly, showing the intensified typhoon activity and increased precipitation amount, while the effect of the prognostic cloudiness and PBL enhanced mixing scheme is not noticeable. It appears that WSM1 simulates relatively unstable and drier atmospheric structure than WSM5, which is induced by the latent heat change and the associated radiative effect due to not considering ice cloud. And WSM1 results the enhanced typhoon intensity and heavy rainfall simulation. It suggests that the microphysics is important to improve the capability for typhoon simulation of a global model and to increase the predictability of medium range forecast.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.526-531
• /
• 2014

Vehicular communications have been receiving much attention in intelligent transport systems(ITS) by combining communication technology with automobile industries. In general, vehicular communication can be used for vehicle-to-vehicle(V2V) and vehicle-to-infrastructure( V2I) communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environment(WAVE). WAVE system transmits signal in 5.835~5.925 GHz frequency band with orthogonal frequency division multiplexing(OFDM) signaling. In this paper, after 32 bit processed the channel monitoring in MAC(Media Access Control) layer of WAVE system implemented according to IEEE 802.11p standard, data were received and we evaluated the performance, we built the test bed consisting of OBU(On Board Unit) in the real expressway. We transmitted WSM(WAVE Short Message) and received WSM between OBU wirelessly. And then, we calculated channel occupancy time per one frame and throughput, and evaluated the performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.674-683
• /
• 2017

The frequency and intensity of soil moisture stress associated with climate change has increasing, and the stability of field crop cultivation has decreasing. This experiment was conducted to investigate the effect of soil moisture management method on growth and yield of corn. Soil moisture was managed at the grade of WSM (wet soil moisture, 34.0~42.9%), OSM (optimum soil moisture, 27.8~34.0%), DSM (dry soil moisture, 20.3~27.8%), and ESM (extreme dry moisture, 16.6~20.3%) during V8 (8th leaf stage)-VT (tasseling stage). After VT, irrigation was limited. The treated amount of irrigation was 54.1, 47.7, 44.0 and 34.5% of total water requirement, respectively. The potential evapotranspiration during the growing period was $3.29mm\;day^{-1}$, and upward movement of soil water was estimated by the AFKAE 0.5 model in the order of ESM, DSM, OSM, and WSM. We could confirm this phenomenon from actual observations. There was no significant difference in leaf characteristics, dry matter, and primary productivity depending on the level of soil moisture, but leaf development was delayed and dry weight decreased in DSM. However, dry weight and individual productivity of DSM increased after irrigation withdrawal compared to that of OSM. In DSM, ear yield and number of kernels per ear decreased, but water use efficiency and harvest index were higher than other treatments. Therefore, it is considered that the soil moisture is concentratedly managed before the V8 period, the V8-VT period is controlled within the range of 100 to 500 kPa (20.3~27.8%), and no additional irrigation is required after the VT.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.520-525
• /
• 1997

This paper presents a fault detection and diagnosis methodology based on weighted symptom model and pattern matching between the coming fault propagation trend and the simulated one. In the first step, backward chaining is used to find the possible cause candidates for the faults. The weighted symptom model is used to generate those candidates. The weight is determined from dynamic simulation. Using WSM, the methodology can generate the cause candidates and rank them according to the probability. Second, the fault propagation trends identified from the partial or complete sequence of measurements are compared with the standard fault propagation trends stored a priori. A pattern matching algorithm based on a number of triangular episodes is used to effectively match those trends. The standard trends have been generated using dynamic simulation and stored a priori. The proposed methodology has been illustrated using two case studies, and the results showed satisfactory diagnostic resolution.