• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.109.1-109.1
• /
• 2012

본 연구에서는 co-sputtering을 통한 $WO_3$와 $In_2O_3$ 타겟을 사용하여 $WO_3$ 파워에 따른 Tungsten(W)-doped $In_2O_3$ (IWO) 투명 전극의 전기적, 광학적, 구조적 특성을 연구하고 이를 활용한 유기태양전지(Organic Photovoltaics; OPVs)의 특성을 분석하였다. Tungsten의 doping 농도는 $WO_3$에 인가되는 Radio-frequency (RF) power를 5~30 W 까지 변화시켜 조절하였으며, Rapid Thermal Annealing (RTA) 후 열처리 공정을 통해 IWO 박막의 전기적, 광학적, 구조적 특성을 분석하였다. Hall measurement 및 UV/Vis spectrometry 분석을 통하여 가시광선 영역에서 80% 이상의 높은 투과율, $48\;cm^2\;V^{-1}\;s^{-1}$의 홀 이동도, 20 ${\Omega}/{\Box}$ 이하의 낮은 면저항과 $3.2{\times}10^{-4}\;{\Omega}-cm$의 비저항 값을 나타내었다. 최적화된 IWO 박막을 이용한 OPV 셀 특성은 fill factor(FF): 61.59 %, short circuit current($J_{SC}$): 8.84 $mA/cm^2$, open circuit voltage($V_{OC}$): 0.60 V, efficiency(PCE): 3.27 %로 ITO로 제작된 OPV 샘플과 비교하였을 때 ITO를 대체할 수 있는 고이동도의 새로운 투명 전극 재료로서의 가능성을 확인하였다.

• 센서학회지
• /
• 제25권3호
• /
• pp.223-228
• /
• 2016

In this work, we prepared porous WO3 nanofibers (NFs) functionalized by bio-inspired catalytic $Cr_2O_3$ and $Co_3O_4$ nanoparticles as highly sensitive and selective $H_2S$ gas sensing layers. Highly porous 3-dimensional (3D) NFs networks decorated by well-dispersed catalyst NPs exhibited superior $H_2S$ gas response ($R_{air}/R_{gas}$ = 46 at 5 ppm) in high humidity environment (95 %RH). In particular, the sensors showed outstanding $H_2S$ selectivity against other interfering analytes (such as acetone, toluene, CO, $H_2$, ethanol). Exhaled breath sensors using $Cr_2O_3$ and $Co_3O_4$ catalysts-loaded $WO_3$ NFs are highly promising for the accurate detection of halitosis.

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.133-137
• /
• 2002

착체중합법을 사용하여 nano-size의 $ZnWO_4$ powder를 저온에서 합성하였다. 금속이온물질로서 zinc acetate와 tungstic acid를 사용하였으며 용매는 de-ionized water를 사용하였다. $300^{\circ}C$ 부터 $600^{\circ}C$의 온도 영역에서 하소한 분말에 대해 열분해 및 결정화 과정, 분말의 형상, 입도 변화 양상을 분석하였다. 일반적인 고상합성 시에 필요한 온도보다 현저히 낮은 온도인 $400^{\circ}C$에서 $ZnWO_4$상이 생성되었으며, $600^{\circ}C$에서 완전한 결정상을 얻을 수 있었다. 합성된 분말은 $400^{\circ}C$에서 원형과 silk-worm 형태가 혼합된 입자 형상을 나타내었고 $500^{\circ}C$에서 보다 균질한 양상을 나타내었다. 합성된 분말의 입자 크기는 $400^{\circ}C$~$600^{\circ}C$의 온도영역에서 17.62~24.71 nm 정도로 매우 미세하였으며, 하소 온도가 증가함에 따라 분말의 결정상과 입도가 증가하는 것을 확인하였다.

• KSBB Journal
• /
• 제5권3호
• /
• pp.215-221
• /
• 1990

양이온 계변활성제의 역미셀을 이용하여 단백질을 선택적으로 분리할 수 있는 분리조건을 밝히기 위해서 분자량과 등전점이 다른 여러 단백질의 용해에 미치는 pH, 이온 및 강도, 계면활성제의 종류 등 system para-meter 틀에 대해 연구 검토하였다. 등전점이 낮은 pepSIn 은 pH 5-7 이상에서, 등전점이 높은 ribotluclease-a 나 lisozym$\xi$은 pH 11-12 이상에서 용해되어 단백질이 계면 활성제의 (+)전하와 반대전하언 (-)를 띠는 등전점 이상의 pH영역에서 용해가 가능하였다. KCI을 이용하여 이온강도를 증가시킴에 따라 단백질의 용해 정도는 전반적으로 감소하였다. 친수성부분은 동일하나 소수성 무분이 다콘 양이온계면활성제 CTAB, DDAB, TOMAC 을 이용하여 역미셀제를 변화시켰을 때, 소수성 탄화수 소사슬이 3개 인 TOMAC(Wo=5) 이 탄화수소사슬이 1개인 CTAB(Wo=28)와 2개인 DDAB(Wo=7-12)에 비해 작은 역셀을 형성하여 낮은 용해 정도플 보였 다. 찬은 DDAB에 대해서도 유기용매의 종류에 따라 W Wo가 달랐는데 benzene(Wo=7)에 비하여 t$\xi$trachloro-ethylene (Wo= 12)이 보다 큰 역미젤을 형성하고 용해 능력도 높았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.191.1-191.1
• /
• 2015

최근에 백색 발광다이오드를 개발하기 위한 고효율의 형광체 개발에 많은 연구가 집중되고 있다. 본 연구에서는 $La_2WO_6$ 모체 결정에 다양한 활성제 이온인 $Eu^{3+}$, $Dy^{3+}$, $Sm^{3+}$, $Tb^{3+}$를 각각 도핑하여 다양한 발광 파장을 갖는 고효율의 형광체를 제조하였다. 합성한 형광체 분말은 초기물질 $La_2O_3$, $WO_3$, 희토류 원소 ($Eu_2O_3$, $Dy_2O_3$, $Sm_2O_3$, $Tb_4O_7$)를 각각 화학양론적으로 준비하여 고상반응법으로 제조하였으며, 이때 하소 공정은 $400^{\circ}C$에서 3시간, 소결 공정은 $1050^{\circ}C$에서 5시간 유지하여 합성하였다. $La_2WO_6:Eu^{3+}$ 형광체 분말의 경우에 320, 395, 465 nm에서 강한 흡광 파장이 발생하였으며, 파장 320 nm로 여기 시켰을 때 최대 발광 세기는 618 nm에서 관측되었다. $Sm^{3+}$을 도핑한 형광체의 흡광 스펙트럼은 310, 375, 406, 475 nm에서 발생하였으며, 310 nm로 여기 시켰을 때 602 nm의 강한 주황색 발광 신호가 나타났다. $Dy^{3+}$가 도핑된 $La_2WO_6$ 형광체는 575 nm에 강한 발광 피크를 갖는 황색을 나타내었으며, 흡광 파장은 313 nm 이었다. $Tb^{3+}$를 도핑한 형광체의 주 흡광 스펙트럼은 316 nm에서 발생하였고, 발광 스펙트럼은 545 nm에 피크를 갖는 녹색 발광 신호가 나타났다. 활성제이온의 종류에 따른 형광체의 흡광과 발광, 결정 구조의 특성을 체계적으로 제시하고자 한다.

• 한국재료학회지
• /
• 제28권1호
• /
• pp.12-17
• /
• 2018

$In_2O_3$ doped $WO_3$ powders were prepared by a polymer solution route and their $NO_2$ gas sensing properties were analyzed. The synthesized powders showed nano-sized particles with specific surface areas of $6.01{\sim}21.5m^2/g$ and the particle size and shape changed according to the content of $In_2O_3$. The gas sensors fabricated with the synthesized powders were tested at operating temperatures of $400{\sim}500^{\circ}C$ and 100~500 ppm concentrations of $NO_2$ atmosphere. The particle size and $In_2O_3$ content affected on the initial sensor resistance in an air atmosphere. The highest sensitivity (8.57 at $500^{\circ}C$), which was 1.77 higher than the sensor consisting of the pure $WO_3$ sample, was measured in the 0.5 mol% $In_2O_3$ doping sample. In addition, the response time and recovery time were improved by the addition of $In_2O_3$.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.33.1-33.1
• /
• 2009

To date, nanostructured tungsten oxides with a variety of stoichiometries, such as WO3, WO2.9, W18O49, and WO2, have been prepared, because they are promising candidates for applications such as gas sensors, photocatalysts, electrochromic devices, and field emission devices. Among them, W18O49 and WO2 have been widely studied due to their outstanding chemical sensing, catalytic, and electron emissive properties. Here we report, for the first time, a one-pot solution-phase route to synthesizing a novel composite hierarchical hollow structure without adding catalysts, surfactants, or templates. The products, consisting of a WO2 hollow core sphere surrounded by a W18O49 nanorod shell (yielding a sea urchin-like structure), were generated as discrete structures via Ostwald ripening. To our knowledge, this type of composite hierarchical core/shell structure has not been reported previously. The morphological evolution and the detailed growth mechanism were carefully studied. We also demonstrate that the size of the hollow urchins is readily tunable by controlling the reactant concentrations.Interestingly, although bulk tungsten oxides are weakly paramagnetic or diamagnetic, the as-prepared products show unusual ferromagnetic behavior atroom temperature. The urchin structures also show a very high Brunauer-Emmet-Teller (BET) surface area, suggesting that they may potentially be applied to chemical sensor or effective catalyst technologies.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.127-130
• /
• 2002

In this study, development of a new LTCC material using a non-glassy system was attempted with respect to reducing the fabrication process steps and cost down. Lowering the sintering temperature can be achieved by liquid phase sintering. For LTCC application, the starting material must have quality factor as high as possible in microwave frequency range. And also, the material should have a low dielectric constant for enhancing the signal propagation speed. Regarding these factors, dielectric constants of various materials were estimated by the Clausius-Mosotti equation. Among them, CaWO$_4$ was tamed out the suitable LTCC material. CaWO$_4$ can be sintered up to 98% of full density at 1200$^{\circ}C$ for 3 hours. It's measured dielectric constant, quality factor, and temperature coefficient of resonant frequency were 10.15, 62880GHz, and -27.8ppm/$^{\circ}C$, respectively. In order to modify the dielectric properties and densification temperature, 0.5∼1.5 wt% LiF were added to CaWO$_4$. LiF addition reduced the sintering temperature/time down to 800$^{\circ}C$/10∼30min due to the reactive liquid phase sintering. Dielectric constant lowered from 10.15 to 9.38 and Q x fo increased up to 92000GHz with increasing LiF content.

• 한국재료학회지
• /
• 제22권5호
• /
• pp.215-219
• /
• 2012

Red phosphors $Ca_{1-1.5x}WO_4:{Eu_x}^{3+}$ were synthesized with different concentrations of $Eu^{3+}$ ions by using a solid-state reaction method. The crystal structure of the red phosphors was found to be a tetragonal system. X-ray diffraction (XRD) results showed the (112) main diffraction peak centered at $2{\theta}=28.71^{\circ}$, and the size of crystalline particles exhibited an overall decreasing tendency according to the concentration of $Eu^{3+}$ ions. The excitation spectra of all the phosphors were composed of a broad band centered at 275 nm in the range of 230-310 nm due to $O^{2-}{\rightarrow}W^{6+}$ and a narrow band having a peak at 307 nm caused by $O^{2-}{\rightarrow}Eu^{3+}$. Also, the excitation spectrum presents several strong lines in the range of 305-420 nm, which are assigned to the 4f-4f transitions of the $Eu^{3+}$ ion. In the case of the emission spectrum, all the phosphor powders, irrespective of $Eu^{3+}$ ion concentration, indicated an orange emission peak at 594 nm and a strong red emission spectrum centered at 615 nm, with two weak lines at 648 and 700 nm. The highest red emission intensity occurred at x = 0.10 mol of Eu3+ ion concentration with an asymmetry ratio of 12.5. Especially, the presence of $Eu^{3+}$ in the $Ca_{1-1.5x}WO_4:{Eu_x}^{3+}$ shows very effective use of excitation energy in the range of 305-420 nm, and finally yields a strong emission of red light.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.630-635
• /
• 2009

For use as a photocatalyst, bismuth tungsten oxide, $Bi_2WO_6$, was successfully synthesized by hydrothermal treatment at pH = 11 and heating at 200 ${^{\circ}C}$ for 24h, and samples were subsequently thermal treated at 400, 600, and 800 ${^{\circ}C}$ to increase crystallinity. TEM results revealed that the initial untreated particles were sheet‐shaped, grain size was below 80 nm, and it increased with treated temperatures. These $Bi_2WO_6$ samples absorbed at around 400 nm in the visible light range and the intensity of absorption was particularly strongest in samples thermal treated at 600 ${^{\circ}C}$. Their photoluminescence abilities, related to the recombination between the excited electrons and holes, were overall small for other general photocatalysts such as TiO2, and the smallest in the case of thermal treatment at 600 ${^{\circ}C}$, as reversible result of UV‐visible absorbance. Methyl orange of 5.0 ppm aqueous solution was almost completely removed after 2 h when treated over the $Bi_2WO_6$ thermal treated at 600 ${^{\circ}C}$.