• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.567-573
• /
• 2017

선박용 경유(황 농도 약 230 ppmw)의 황화합물 제거를 위해 산화텅스텐($WO_x$)을 실리카로 이루어진 다공성 물질인 SBA-15에 담지한 산화 촉매를 제조하였으며 산화제로 과산화수소를 이용한 산화공정과 추출 용매로 아세토니트릴을 이용한 추출공정을 통해 촉매의 산화성능을 확인하였다. XRD 및 XRF, XPS 분석과 BET 이론을 통해 제조한 촉매의 물리적 특성에 대해 조사하였다. 담지된 $WO_x$는 삼산화텅스텐($WO_3$)으로 존재하였으며 실제 담지율이 약 10 wt% 부근일 때 단일층을 형성하는 것으로 판단된다. 제조한 촉매의 산화성능을 확인한 결과, 0.1 g의 13 wt% $WO_x$/SBA-15 촉매와 과산화수소(산소/황 몰 비=10)를 도입하여 $90^{\circ}C$에서 3시간 동안 반응이 이루어졌을 때 76.3%의 가장 높은 황 제거율을 나타냈다. 연속반응 비교 실험을 통해 1회의 산화반응으로 황 화합물의 산화가 충분히 일어났음을 확인하였다. 또한 5회의 추출공정을 통해 최대 94.4%의 황 제거율을 나타냈다.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.139-144
• /
• 2003

평면형 마이크로가스센서를 MEMS 기술을 이용하여 제작하였다. NO₂ 가스의 감지를 위한 감지물질로서 이용되는 WO₃ 박막은 텅스텐 타겟을 스퍼터링한 후에 1시간 동안 여러 온도에서 열산화법에 의해 형성하였다. NO₂ 감도(Rgas/Rair)는 열처리 온도에 따른 WO₃ 박막에 대해 조사하였다. 동작온도가 200℃일 때 600℃에서 열처리한 시편의 NO₂가스감도가 가장 높았다. XRD의 결과는 열처리한 시편은 triclinic구조와 orthorhombic구조가 혼합된 다결정상을 보여주었다 또한 시편은 triclinic구조가 적을수록 더 높은 가스 감도를 보여주었다 600℃에서 열처리한 시편의 20℃의 동작온도일 때 5 ppm NO₂ 가스감도는 약 90이었다.

• 한국분말재료학회지
• /
• 제22권2호
• /
• pp.129-133
• /
• 2015

Porous W with controlled pore structure was fabricated by thermal decomposition and hydrogen reduction process of PMMA beads and $WO_3$ powder compacts. The PMMA sizes of 8 and $50{\mu}m$ were used as pore forming agent for fabricating the porous W. The $WO_3$ powder compacts with 20 and 70 vol% PMMA were prepared by uniaxial pressing and sintered for 2 h at $1200^{\circ}C$ in hydrogen atmosphere. TGA analysis revealed that the PMMA was decomposed at about $400^{\circ}C$ and $WO_3$ was reduced to metallic W at $800^{\circ}C$. Large pores in the sintered specimens were formed by thermal decomposition of spherical PMMA, and their size was increased with increase in PMMA size and the amount of PMMA addition. Also the pore shape was changed from spherical to irregular form with increasing PMMA contents due to the agglomeration of PMMA in the powder mixing process.

• 한국재료학회지
• /
• 제12권12호
• /
• pp.930-934
• /
• 2002

Nanosized $WO_3$ powders were synthesized by the sol-precipitation process using $WCl_{6}$ as the starting material, ethanol as a solvent and $NH_4$OH solution as a precipitant, followed by a washing-drying treatment and calcination. The effects on the powder crystallinity and microstructure of calcination temperature were investigated with XRD and FE-SEM. The $WO_3$ powders calcined at $500^{\circ}C$ and $700^{\circ}C$ showed good crystallinity and their mean particle size was 30nm and 70nm, respectively. These powders were used for the preparation of pastes which were printed as thick films on alumina substrates with comb-type Pt electrodes. The particle size strongly influenced the $NO_2$ gas sensing property of the thick films. A significant reduction in the $NO_2$ sensitivity was observed for the film prepared from larger particle size, having thus a larger grain size. For the film having a smaller grain size, on the other hand, the higher $NO_2$ sensitivity was observed and the sensitivity increased with $NO_2$ concentration.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.99.2-99.2
• /
• 2011

Transparent conducting oxides (TCOs) supported on glass are widely used as substrates in PEC studies for photovoltaic hydrogen generation applications However, high sheet resistane ($10{\sim}15{\Omega}/cm^2$) and fragileness of glass-supported TCO substrates are the obstacles to produce the large area PEC cells. Such internal sheet resistance is detrimental to efficient collection of photogenerated majority charge carriers at the photoactive material and electrolyte interface. Moreover, these TCO substrates are very expensive and consume about 40~60% cost of the devices. Hence, a low sheet resistance of the substrate is a key point in improving the performance of PEC devices. Metallic substrates coated with a photoactive material would be a good choice for efficient charge collection. Such metal substrates based photanodes are best candidate for large-scale phtoelectrochemical water splitting for hydrogen generation. In this study, we report the enhanced PEC performance of $WO_3$ film on metal(chemical etched, bare) substrate. It is proposed that interface between $WO_3$ and the metal substrate is responsible for efficient charge transfer and demonstrated significant improvement in the photoelectrochmical performance. X-ray diffration and FESEM suduies reveled that $WO_3$ films are monoclinic, porous, polycrystalline with average grain size of ~50nm. Photocurrent of $WO_3$ prepared on metal substrates was measured in 0.5M $H_2SO_4$ electroyte under simulated $100mW/cm^2$ illumination.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.384-388
• /
• 2017

The effect of the mixing method on the characteristics of hybrid-structure W powder with nano and micro sizes is investigated. Fine $WO_3$ powders with sizes of ${\sim}0.6{\mu}m$, prepared by ball milling for 10 h, are mixed with pure W powder with sizes of $12{\mu}m$ by various mixing process. In the case of simple mixing with ball-milled $WO_3$ and micro sized W powders, $WO_3$ particles are locally present in the form of agglomerates in the surface of large W powders, but in the case of ball milling, a relatively uniform distribution of $WO_3$ particles is exhibited. The microstructural observation reveals that the ball milled $WO_3$ powder, heat-treated at $750^{\circ}C$ for 1 h in a hydrogen atmosphere, is fine W particles of ~200 nm or less. The powder mixture prepared by simple mixing and hydrogen reduction exhibits the formation of coarse W particles with agglomeration of the micro sized W powder on the surface. Conversely, in the powder mixture fabricated by ball milling and hydrogen reduction, a uniform distribution of fine W particles forming nano-micro sized hybrid structure is observed.

• 한국재료학회지
• /
• 제28권2호
• /
• pp.108-112
• /
• 2018

The present study demonstrates the effect of raw powder on the pore structure of porous W-Ni prepared by freeze drying of camphene-based slurries and sintering process. The reduction behavior of $WO_3$ and $WO_3-NiO$ powders is analyzed by a temperature programmed reduction method in Ar-10% H2 atmosphere. After heat treatment in hydrogen atmosphere, $WO_3-NiO$ powder mixture is completely converted to metallic W without any reaction phases. Camphene slurries with oxide powders are frozen at $-30^{\circ}C$, and pores in the frozen specimens are generated by sublimation of the camphene during drying in air. The green bodies are hydrogen-reduced at $800^{\circ}C$ and sintered at $1000^{\circ}C$ for 1 h. The sintered samples show large and aligned parallel pores to the camphene growth direction, and small pores in the internal wall of large pores. The strut between large pores, prepared from pure $WO_3$ powder, consists of very fine particles with partially necking between the particles. In contrast, the strut densification is clearly observed in the Ni-added W sample due to the enhanced mass transport in activation sintering.

• 센서학회지
• /
• 제5권5호
• /
• pp.47-54
• /
• 1996

$WO_{3}$모물질에 Pt와 $SnO_{2}$ 활성촉매를 첨가하여 수 ppm정도의 NOx를 감지할 수 있는 후막형 NOx센서를 제조하였다. 센서의 최대 감도는 $250^{\circ}C$정도에서 얻을 수 있었으나, 회복속도를 고려하여 $330^{\circ}C$에서 특성실험을 실시하였다. 기존의 $WO_{3}$를 사용한 것보다 감도, 반응 및 회복 속도가 개선되었고 또한 뛰어난 선택성과 기체흐름에 대한 안정성을 보여주었다. 농도변화에 대한 선형성이 우수하게 나타남으로 계측기에 응용가능성을 보여주었다.

• 한국전기전자재료학회논문지
• /
• 제11권11호
• /
• pp.1001-1006
• /
• 1998

$WO_3$ based semiconduction sensor have been reported to have excellent sension properties to $NO_x$ gases by many researchers. In this study appropriate $WO_3$ precursor have been chosen and thin film sensors were fabricated by metallo organic deposition process. Their sensing characteristics were investigated as a function of NO concentration, heat treatment, and measuring temperature. Tungsten dichloro triethoxide was found to be a good precursor for $WO_3$ thin film in this method. Samples heat treated at $600^{\circ}C$ showed sensitivity (S) 200 to 50 ppm NO gas when measuring temperature was $150^{\circ}C$.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.1046-1054
• /
• 2001

적층일체형 RF 수동소자 모듈 구현을 위한 저온소결 유전체로의 사용을 위해 B$_2$O$_3$ 및 CuO의 첨가가 PbWO$_4$-TiO$_2$계 세라믹의 고주파 유전특성에 미치는 영향을 조사하였다. 본 연구자는 PbWO$_4$가 8$50^{\circ}C$에서 소결이 가능하고 우수한 유전특성($\varepsilon$$_{r}$=21.5, Q$\times$f$_{0}$=37200 GHz, $ au$$_{f}$ =-31 ppm/$^{\circ}C$)을 보여 LTCC 재료로의 응용가능성이 있다고 판단하였다. 이에 PbWO$_4$의 $\tau$$_{f}$ 조절을 위해 TiO$_2$를 첨가하여 8$50^{\circ}C$에서 소결한 결과 TiO$_2$의 함량이 8.7 mol%일 때 $\tau$$_{f}$ 를 +0.2ppm/$^{\circ}C$로 조절할 수 있었고, 이때 $\varepsilon$$_{r}$ 및 Q$\times$f$_{0}$ 값은 각각 22.3과 21400GHz이었다. TiO$_2$첨가량 증가에 따른 Q$\times$F$_{0}$ 값의 감소는 결정립 크기 감소에 의한 것이었다. Q$\times$f$_{0}$ 값의 개선을 위해 다양한 량의 CuO 및 B$_2$O$_3$를 첨가한 결과, 최적의 유전특성을 얻기 위해서는 적정량의 첨가량이 필요함을 알 수 있었다. CuO 첨가의 경우 유전특성 개선을 위한 최적의 첨가량은 0.05 wt%이었고 이 조성을 8$50^{\circ}C$에서 소결한 결과, 얻어진 유전특성은 $\varepsilon$$_{r}$=23.5, Q$\times$f$_{0}$=32900 GHz, $\tau$$_{f}$ =-2.2 ppm/$^{\circ}C$이었다. B$_2$O$_3$첨가의 경우 최적의 첨가량은 1.0~2.5 wt%이었으며 8$50^{\circ}C$에서 소결한 경우 얻어진 유전특성은 $\varepsilon$$_{r}$20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$이었다.