• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1049-1056
• /
• 2016

In this paper, a design method for a compact dual-band slot antenna with bent slot is studied. Bent slots are added on the rectangular slot of the proposed antenna for dual-band operation. The rectangular slot is fed by a coaxial cable by placing a rectangular feeding patch inside the slot. When the bent slots are added onto the both corner of the upper side of the rectangular slot symmetrically, a new resonant frequency is created in low frequency because of the increasement of the slot length. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 4.50-8.30 GHz band including 5GHz WLAN band is fabricated on an FR4 substrate with a dimension of 30 mm by 30 mm. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.40-2.49 GHz and 4.33-9.85 GHz for an input reflection coefficient < -10 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.814-820
• /
• 2015

In this paper, A high selective dual-band bandpass filter was proposed using a dual-mode ring resonator with two short-circuited stubs. For dual-mode resonance, the ring resonator is directly connected with non-orthogonal feed-lines via coupling capacitors. Two short-circuited stubs which are unequal lengths are simultaneously placed at two corners along the two symmetry plane of the ring resonator in order to obtain dual-band responses. Because the feeding angle perturbated ring resonator of the proposed dual-band bandpass filter has the symmetrical structure, Even/Odd mode analysis can be well applied to extract the scattering parameters and transmission zero frequencies. The proposed dual-band bandpass filter was designed and fabricated for WLAN(Wireless Local Area Network) application of IEEE 802.11n standard. The measured results showed a good agreement with the simulation results, and it should be well applied not only for WLAN applications but also for any other communication systems.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.223-229
• /
• 2003

In this thesis, the characteristics of an inverted-F antenna for the 2.4GHz and 5.8GHz zwirless local area network(WLAN) have been analysed in terms of the variation of design parameters. The antenna can be integrated on WLAN for notebook printed circuit board, and the characteristics in terms of the variation of the gap between feed line and shorting stub, gap between antenna's leg and ground plane, antenna leg's width, substrate's height and dielectric constant are analysed. By using these characterization plot of design parameter, the tuning techniques are proposed to design optimum antenna. The designed antenna has 170MHz, 500MHz frequency bandwidth ,VSWR is 1.6, 1.14 and 3.5dBi gain.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.9
• /
• pp.47-54
• /
• 2004

The previous works for WLAN system based on OFDM is mainly individual study for independent frequency offset or symbol synchronization. In this paper, the performance of IEEE 802.11a WLAN(Wireless Local Area Network) system in the realistic indoor multipath channel models is analyzed with frequency offset compensation and channel estimation methods. For the performance analysis of the WLAN system indoor Rayleigh multipath channels are adopted, and the BER(Bit Error Rate) of WLAN system is calculated with y2 code-rate 16-QAM based on standard specification. From the simulation results, the difference of required Eb/No for BER of 10-3 is 1-2dB between the channel estimation and frequency offset compensation, and perfect channel estimation and no frequency offset.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.2
• /
• pp.33-40
• /
• 2008

Streaming video has become a popular form of transferring media over the wired/wireless network. TCP-friendly rate control (TFRC) is used as a streaming media transport protocol. Using the TCP congestion response function and current network conditions, TFRC adjusts its sending rate to yield the maximum TCP-friendly throughput. Since TFRC was designed for applications that would prefer to maintain a slowly-changing sending rate, it is less responsive to changes in handover between wireless heterogeneous networks such as 3G network, WLAN, and so on. This paper shows a new TFRC method for vertical handover over wireless heterogeneous network. The proposed TFRC method has features of low quality interruption and fast rate adaptation to a new target network. The simulation results show that the proposed one provides better QoS and throughput support than the traditional TFRC scheme during vertical handover.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.2
• /
• pp.71-77
• /
• 2019

With 5G standards proceeding in earnest and increasing demand for services of indoor localization, research on indoor location recognition is being studied in various industrial fields, and research based on fingerprint recognition technology using Wireless Local Area Network (WLAN) is representative. In this paper, we propose an indoor positioning system based on fingerprinting technique that uses Cloud Radio Access Network (C-RAN) architecture and Channel State Information (CSI). In order to improve the performance in indoor positioning, we combined existing fingerprinting method and K nearest neighbor (KNN) technology which is one of the machine running technique. The performance improvements of the proposed indoor positioning system was verified by comparative experiments with the existing localization technique in a indoor localizztion testbed.

• Journal of the Korea Society for Simulation
• /
• v.14 no.2
• /
• pp.83-92
• /
• 2005

Access networks connected in B3G networks provide its property network service. Hence, though mobile users may utilize only a network service from an access network, they can also use variety of network services from several access networks for their service satisfaction. To support heterogeneous changeable network service in access networks, the mobile terminal must implement heterogeneous system techniques so that it is able to change the network service by ISHO (Inter-System Handover) In this paper, we present the ISHO condition by the policy-based framework in B3G networks. Also, we propose an ISHO scheme to control network resources for the QoS management of a mobile session between UMTS and WLAN access networks. To support the QoS management, the proposed scheme is that it will be implemented before the resource exhaustion occurs to effect network performances.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.263-268
• /
• 2010

As the demand of high quality service in next generation wireless communication systems, a high performance of data transmission requires an increase of spectrum efficiency and an improvement of error performance in wireless communication systems. In this paper, we propose a multi-user multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) system with cyclic delay diversity and block diagonalization procoding method to improve bit error rate (BER) performance with wireless local area network (WLAN) channel model C and D for 802.11n WLAN system. The results of mathlab simulation show the improvement of BER performance in 802.11n wireless indoor channel environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.168-175
• /
• 2006

To cope with channel variation, wireless networks such as IEEE 802.11 WLAN provide multiple transmission rates by employing different channel modulation and coding schemes. However, the coexistence of different transmission rates degrades the total system performance of the network. In order to eliminate this performance abnormality and improve protocol capacity, we propose a new Packet transmission algorithm, the RAT(Rate-Adapted Transmission) scheme. The RAT scheme distributes the wireless channel fairly based on the channel occupancy time. Moreover, it efficiently transmits packets even in a single station using rate-based queue management. Therefore, the RAT scheme obtains not only the inter-rate contention gain among stations but also the intra-rate contention gain among connections in a single station.

• Journal of information and communication convergence engineering
• /
• v.15 no.4
• /
• pp.199-204
• /
• 2017

A compact dual-band half-ring-shaped (HRS) bent slot antenna fed by a coplanar waveguide for wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications is presented. The antenna consists of two HRS slots with different lengths and widths. The two HRS slots are connected through an arc-shaped slit, and the upper HRS slot is bent in order to reduce the size of the antenna. The optimized dual-band HRS bent slot antenna operating in the 2.45 GHz WLAN and 3.5 GHz WiMAX bands is fabricated on an FR4 substrate with dimensions of 30 mm by 30 mm. The slot length of the proposed dual-band slot antenna is reduced by 35%, compared to a conventional dual-band rectangular slot antenna. Experimental results show that the proposed antenna operates in the frequency bands of 2.40-2.49 GHz and 3.39-3.72 GHz for a voltage standing wave ratio of less than 2, and measured gain is larger than 1.4 dBi in the two bands.