• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1338-1343
• /
• 2018

MIMO(Multiple Input Multiple Output) slot antenna that operates on the dual WiFi band(2.401~2.495GHz, 5.18~5.825GHz), in this paper, was studied. The basic theory for the slot design is based on the coupling between adjacent slot, and slots are fed by the each microstrip lines. Two slot antennas for the MIMO operation are located on the left and the right side of top of the metal notebook, and grounds between a notebook and two microstrip feeding lines are connected. Measurement of return loss showed under -6dB on entire design band, and isolation was below than -30dB. Radiation efficiency, average gain and peak gain for the left and the right slot were measured in the anechoic chamber, and showed good performances as 57.25%, -2.42dBi, 5.64dBi and 55.35%, -2.61dBi, 6.42dBi for the 2.4GHz band and 55.89%, -2.58dBi, 7.3dBi and 53.79%, -2.8dBi, 7.54dBi for the 5GHz band.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1138-1143
• /
• 2013

In this paper, we propose a smartphone application based on a wireless fidelity(WiFi) in order to control the charging of electric vehicle(EV) and monitor the charging status together with the vehicle history information. The driver obtains much information on vehicle status through a smartphone application which communicates with the electric vehicle supply equipment(EVSE) management server while the EV also communicates with the EVSE for the authentification through controller area network(CAN). We also implement the simulator for the EV charging control system to verify the functions of the proposed application where the simulator consists of an EV model, an EVSE, and a smartphone. It is shown by the simulator that the proposed smartphone application allows the driver to control and to monitor the charging process of an EV conveniently and, moreover, it can provide the driver with vehicle information stored in the EVSE management server.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.381-386
• /
• 2014

In this paper, the effect of slot antenna's location in the radiation performance and impedance bandwidth was analyzed. The proposed antenna was designed to operate at Wi-Fi band(2.4~2.5 GHz) when the slot antenna is located at the center of the ground plane, the proposed antenna has a bandwidth of 340 MHz(2.24~2.58 GHz) under voltage standing wave ratio of = 2 and achieves average realized efficiency of 69 % over Wi-Fi bands.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.589-590
• /
• 2010

Recently, as various smart phones released smart phones are becoming popular.Accordingly, the growing interest in mobile information service or advertising serviece, and attention has been concentrated in the mobile environment. These servieces should be carried out smoothly in the all situation (cannot access mobile Wi-Fi networks and 3G services), and should have the uniqueness that is fit for purpose. In this papaer, module for a particular purpose of the foundation of specialized location-based map services was implemented using a Packing R-tree by using a GIS engine based on Microsoft Window Mobile and Android operating system without communication device like 3G or Wi-Fi.

• Spatial Information Research
• /
• v.23 no.3
• /
• pp.1-10
• /
• 2015

Due to recent improvement of various sensor technologies, indoor positioning becomes available. However, Indoor positioning technologies by Wi-Fi radio map and acceleration sensor and digital campus still have a certain level of errors and a number of researches have been done to increase the positioning accuracy of the indoor positioning. If we could provide a room level accuracy, indoor location based services with current indoor positioning methods such as Wi-Fi radio map and acceleration sensors would be possible. In this paper, we propose an indoor map matching method to provide a room level accuracy based on hidden markov model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.635-642
• /
• 2012

In this paper, a real-time control system with Wi-Fi wireless communication was developed for dentistry Integrated Device. The control system is developed based on the Android platform using S3C6410 ARM core that is equipped with Wi-Fi communication, RS-485, Linux 2.6 and Android 2.0. The control system controls a water purifier, compressor and suction in real-time. The experimental results that the control system was controlled by each control modules connected with a water purifier, compressor and suction. The status values are displayed in real-time using RS485.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1343-1349
• /
• 2014

Recently feature phones are being replaced by smartphones. Because smartphones have various sensors, there are many applications and research works that utilize them. Very few feature phones have GPS modules but all smartphones are equipped with a GPS sensor. One of the hot issues for smartphone research and development is point interest research. In this paper, we will develop an application which protects children using GPS and WiFi.. If a child gets out of the interest-area which is established by parents or guardian, our system sends them messages.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.684-690
• /
• 2015

This paper presents a modified residual-based EKF (Extended Kalman Filter) for performance improvement of indoor positioning using WiFi RSSI (Received Signal Strength Indicator) measurement. Radio signal strength in indoor environments may have irregular attenuation characteristics due to obstacles such as walls, furniture, etc. Therefore, the performance of the RSSI-based positioning with the conventional trilateration method or Kalman filter is insufficient to provide location-based accurate information services. In order to enhance the performance of indoor positioning, in this paper, error analysis of the distance calculated by using the WiFi RSSI measurement is performed based on the radio propagation model. Then, an IARM (Irregularly Attenuated RSSI Measurement) error is defined. Also, it shows that the IARM error is included in the residual of the positioning filter. The IARM error is always positive. So, it is presented that the IARM error can be estimated by taking the absolute value of the residual. Consequently, accurate positioning can be achieved based on the IEM (IARM Error Mitigated) EKF with the residual modified by using the estimated IARM error. The performance of the presented IEM EKF is verified experimentally.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.123-129
• /
• 2017

In this paper, we proposed a smart multiple-tap system which a remote user with smartphone can control multiple-taps in order to reduce standby-power consumption more conveniently when plugged-in electric appliances are turned-off. Recently, several researches of smart multiple-tap using IoT technology has reported. However, in these researches, an additional device like as a server computer is necessary, or multiple-taps could be only remotely controlled by smartphone and not directly controlled by on/off switch. The proposed smart multiple-tap system does not need any additional device only if it has a WiFi router, and it can be used for user as well as remote control using smartphone application and physically direct control using contact switches like existing multiple-taps. Our approach is to develop a smart multiple-tap device capable of WiFi communication can each serve as a server or a client, and can be operated by the hybrid switch combining the on/off contact switch and the relay switch. We implemented the prototype of the proposed system composed of the smart multiple-tap device and the smartphone application, and the test of the prototype validates the proposed system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.55-56
• /
• 2016

컴퓨터의 발달이 가속화됨에 따라 인터넷은 더 이상 PC만의 전유물이 아닌 다양한 종류의 기기들에 접목되어 작업 능률을 높이고 있다. 이에 따른 장비 간 연결성을 높인 무선 네트워킹 분야도 비약적으로 발달되고 있다. 본 논문에서는 컴퓨터 주변 기기 중 스마트 프린팅 서비스에 초점을 맞추어 그 활용성을 높이고자한다. 시중의 스마트 프린터는 Wi-Fi direct로 연결된 PC나 노트북 등의 프린트가 손쉽게 가능하다. 하지만 Wi-Fi/Wi-Fi direct 연결이 되는 PC가 아니거나, 프린터와 PC가 유무선 연결이 되어있지 않은 환경에서는 사용하기 어렵다는 큰 한계점을 안고 있다. 이러한 점을 해소하고자 네트워크 내의 인쇄 작업 환경이 아니더라도, PC-스마트폰-프린터와 같은 구조를 통해 스마트폰이 AP 역할을 하여 사용자가 원하는 PC의 파일을 간편하게 프린트 가능한 환경을 조성하고자 한다. 즉, 언제 어디서나 어떠한 프린터와도 간접 1:1:1 연결을 통한 즉시 인쇄 서비스 구축을 목적으로 한다.