• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.481-496
• /
• 2020

After nuclear power plants are permanently shut down and decommissioned, the remaining irradiated metal components such as stainless steel, carbon steel, and Inconel can be used as neutron absorber. This study investigates the possibility of reusing these metal components as neutron absorber materials, that is burnable poison. The absorption cross section of the irradiated metals did not lose their chemical properties and performance even if they were irradiated over 40-50 years in the NPPs. To examine the absorption capability of the waste metals, the lattice calculations of WH 17×17 fuel assembly were analyzed. From the results, Inconel-718 significantly hold-down fuel assembly excess reactivity compared to stainless steel 304 and carbon steel because Inconel-718 contains a small amount of boron nuclide. From the results, a 20wt% impurity of boron in irradiated Inconel-718 enhances the excess reactivity suppression. The application of irradiated Inconel-718 as a burnable absorber for SMR core was investigated. The irradiated Inconel-718 impurity with 20wt% of boron content can maintain and suppress the whole core reactivity. We emphasize that the irradiated metal components can be used as burnable absorber materials to control the reactivity of commercial reactor power and small modular reactors.

• 신재생에너지
• /
• 제16권4호
• /
• pp.1-8
• /
• 2020

The possibility of conversion to the RC-MAT propulsion system (gasoline engine → electric motor) was studied. However, as commercial battery capacities are low. it is not possible to change the propulsion system. Nevertheless, development of nex-generation batteries is necessary for high capacity and high energy density. Although Li/S batteries are theoretically suitable as new generation batteries, these batteries are not composed of only Li and S. Hence, ensuring high energy density can be difficult. Moreover, electrolytes are important components in the study of energy density; hence, the battery by Li2S8 Molarity was sorted. There are no studied on its various electrode components. In this study, a Li/S battery was fabricated using an assorted 3D sulfur electrode of high energy density and its electrochemical properties were studied. The Li/S battery has a high energy density of 468 Wh/kg at 1.28 M Li2S8 (A805-1.28). Its capacity rapidly decreased after 1 cycle with more than 1 M Li2S8.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권4호
• /
• pp.613-624
• /
• 2021

This paper analyzes the relationship between income distribution and energy consumption from a Pareto optimal approach. For this purpose, the causality relationship between electricity consumption per capita (kWh) with respect to country groups and energy consumption per capita (kg of oil equivalent) along with gross domestic product per capita was analyzed. In addition to this purpose, a Pareto analysis was conducted to determine the countries with the highest per capita national income, how much of the world total energy they consume, and whether the law of power in the energy and electricity markets exists. Finally, the impact of official development assistance provided to low-income countries by high-income countries on the low-income countries' electricity and energy consumption was analyzed. In other words, it was questioned whether pareto redistribution policies serve the purpose or not. The Engle-Granger causality approach was used in the analysis of the causality relationship between variables. Our analysis indicated that, first, the energy data of the country groups may be inadequate in revealing income inequalities. Second, the existence of Pareto law of power and global income inequality can be explained based on energy data. Finally, Pareto optimal redistribution policies to eliminate income inequality remain inadequate in practice.

• 전기학회논문지
• /
• 제68권4호
• /
• pp.513-522
• /
• 2019

We calculate the benefit of distributed combined heat power generators from avoiding a transmission expansion cost by building distributed generators near electricity demand centers. We determine a transmission expansion plan by solving a mixed integer linear problem, where we modify capacities of existing transmission lines and build new transmission lines. We calculate the benefit by comparing the sum of generation and transmission expansion costs with or without distributed generators through two simulation frames. In the first frame, for the current demand, we substitute existing distributed generators for non-distributed generators and measure an additional cost to balance the generation and demand. In the second frame, for increased future demand, we compare the cost to invest only in distributed generators to the cost to invest only in non-distributed generators. As a result, we show that the distributed generators have at least 5.8 won/kWh of the benefit from avoiding the transmission expansion cost.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.659-673
• /
• 2021

This study aims to investigate the impact of the High Pressure Selective Catalytic Reduction system (SCR-HP) on a large marine two-stroke engine performance parameters by employing thermodynamic modelling. A coupled model of the zero-dimensional type is extended to incorporate the modelling of the SCR-HP components and the Control Bypass Valve (CBV) block. This model is employed to simulate several scenarios representing the engine operation at both healthy and degraded conditions considering the compressor fouling and the SCR reactor clogging. The derived results are analysed to quantify the impact of the SCR-HP on the investigated engine performance. The SCR system pressure drop and the cylinder bypass valve flow cause an increase of the engine Specific Fuel Oil Consumption (SFOC) in the range 0.3-2.77 g/kWh. The thermal inertia of the SCR-HP is mainly attributed to the SCR reactor, which causes a delayed turbocharger response. These effects are more pronounced at low engine loads. This study supports the better understanding of the operating characteristics of marine two-stroke diesel engines equipped with the SCR-HP and quantification of the impact of the components degradation on the engine performance.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.749-763
• /
• 2022

The fulcrum of economic development is a sustainable supply of electricity. Nigeria is plagued with blackouts, with one of the lowest per capita electricity consumption in the world (circa. 120 kWh per capita). Hence, policies have been instigated to integrate electricity generation from nuclear power plants (NPP) on or before 2027. However, a critical requirement for NPP generation is the implementation of robust human resource development (HRD) programs. This paper presents the perspective of Nigeria in assessing human resources needs over the entire NPP lifecycle following the milestone approach and employing the IAEA's Nuclear Power Human Resource (NPHR) modeling tool. Three workforce organizations are in focus including the owner/operator, regulators, and construction workers following three decades timeframe (2015-2045). The results indicate that for the study period, a maximum of approximately 9045 personnel (73% construction workers, 24% owner/operator, and 3% regulators) should be directly involved in the NPP program just before the commissioning of the third NPP in 2033. However, this number decreases by about 73% (2465 personnel including 94% operator and 6% regulator) at the end of the study timeframe. The results can potentially provide clarity and guidance in HRD decision-making programs.

• 통합자연과학논문집
• /
• 제15권2호
• /
• pp.89-97
• /
• 2022

This paper presents the comprehensive feasibility study of solar mini-grid project located in Bajhang District, Sudur Paschim Province, Nepal. The study has been conducted with the aim of developing a suitable size solar mini-grid system to meet electricity demand of proposed settlements of the village people. The study forecasts that the estimated average daily peak power consumption of load is about 20kW and average daily energy demand of load is about 100-150kWh/day in the base year 2022. The shared ratio of productive end uses is about 25% of the total power consumption and about 27% of the total energy demand, which will be used for small business/income generation activities and required 45kWp size solar power generation mini-grid system. The estimated project cost for the proposed 45kW solar mini-grid system technology, including 3 years of operation & maintenance, as well as power distribution network up to end user's premises is about 0.24 million USD. It is concluded that 45kWp photovoltaic mini-grid is feasible for the location.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 추계학술발표대회
• /
• pp.654-657
• /
• 2011

Gartner에 따르면 현재 IT산업에서 배출하는 Co2의양은 전 세계 배출량의 2%에 해당하고, 국내 IT기기의 탄소 배출량은 1,750만톤, 2012년에는 2,110만 톤으로 증가할 것으로 예상하고 있다. 이 중 전 세계 기업의 전산설지 전력 소비량은 1척억kWh가 소모되고 있으며, 서버의 전력소모량은 매년 20%씩 증가할 것으로 보고 있다. 또한 IT 시설물은 이산화탄소가 배출되는 7%의 가장 높은 비율을 차지하고 있다. 이에 따라 에너지 경비 절감 및 효율성을 높이고 탄소 배출량 감소를 위한 기술 및 솔루션 개발을 위한 그린 IT기술의 필요성이 높아지고 있다. 이러한 IT 시설물의 에너지 사용량을 실시간으로 확인, 온 습도 센서를 통한 자료 분석을 통하여 대상시설에 맞는 탄소배출량을 환산하여, 이를 활용한 에너지 시설의 제어를 통해 탄소배출과 경비를 절감시키는 시스템이 스마트탄소 통합관제시스템이다. 그리하여 본 논문에서는 통신 프로토콜 단에서부터 '관제'시스템의 성격에 맞고, 저장소의 공간을 효율적이고, 탄소 배출량을 감축시키는데 일조하는 스마트탄소 통합관제시스템의 프로토콜을 설계하고, 이를 테스트 하였다.

• Advances in Energy Research
• /
• 제8권1호
• /
• pp.59-71
• /
• 2022

Increasing cost of electricity due to rising price of fuel is one of the local community's main issues. In this research, switching of grid dependent system to the grid-tied Photovoltaic (PV) system with net metering for a residential building is proposed. The system is designed by considering the maximum energy demand of the building. The designed system is analyzed using RETScreen on technical, economic and environmental grounds. It is found that the system is able to produce 12,000 kWh/year. The system is capable to fulfill the electricity demand of the building during day time and is also capable to sell the energy to the local grid causing the electric meter to run in reverse direction. During night time, electricity will be purchased from grid, and electric meter will run in the forward direction. The system is economically justified with a payback period of only 3 years with net present value of PKR. 4,758,132. Also, the system is able to reduce 7.2 tons of CO₂ not produced in the entire life of the project.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1269-1278
• /
• 2023

This paper presents an operational technique that can secure the stability of DC-Grid centering on MG operated based on ESS in multiple MG where three DC-based microgrid(MG) are interconnected. MG1(PV 600kWp, ESS 1.5MWh) has an 830Vdc grid voltage, MG2(PV 300kWp, ESS 1.1MWh) and MG3(PV 100kWp, ESS 500kWh) are DC-based MG with a 750Vdc grid voltage, and MG1 and MG2, 3 are linked by separate DC/DC converters (BTB). In order to keep different grid voltages stable, the power transmission capacity between MG1 and two MG(MG2, MG3) connected with an independent BTB converter was adjusted to secure the overall stability of the system, and this was verified by confirming that the surplus capacity of ESS was maintained in actual operation.