• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.6
• /
• pp.58-64
• /
• 1997

The wavelengt lockin gsystem of the optical fabry-perot filter theoretially derived and experimentally realized by using the ithering method in order to compensate the laser wavelength drift increasing the BER of the WDM system. The deviation between the laser wavelength and the optical filter center wavelength is compensated by applying a suitable voltage to the PZT. Accordingly, the laser wavelength selected by the fabry-perot filter always maintains the condition of maximum transmission powr. A wavelength locking system has been demonstrated using a fiber fabry-perot filter with a free spectral range of 80nm and an FWH of 1nm. The voltages of the sine wave generated for dithering was 20mV and 10mV, the frequency was 2kHz and center wavelength of the tunable laser was 1550nm. In this paper, the locking system have 20ms of locking time and 2nm of locking range.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.266-274
• /
• 2005

We have designed photonic crystal based bandpass filters whose characteristics are suitable for WDM communication system. The filters consist of coupled point defect resonators in two-dimensional photonic crystal. The frequency response of coupled resonators has been analyzed by the coupling of modes in time, from which the design parameters for the coupled resonator filters have been extracted. For the appropriate choice of the design parameters, each resonator is treated as a lumped L-C resonance circuit, and from the analogy between the equivalent circuit and the standard L-C filter circuits, the design parameters are simply determined from the table for general filter circuit design. Based on the determined design parameters, a photonic crystal based filter has been designed and its performance has been calculated using the finite-difference time-domain method. The designed filter shows a pass band of 50GHz and 0.5 dB in-band ripple, which is suitable for typical WDM communication systems with 100GHz channel spacing.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.138-139
• /
• 2000

최근 광섬유의 전송 용량을 효율적으로 극대화하기 위한 방안으로서 파장 분할 다중화 (WDM: Wavelength Division Multiplexing) 방식의 광통신 시스템이 제안되어 사용되고 있다. WDM 시스템에서는 각 채널 (channel) 마다 각기 다른 파장의 광신호가 할당되어 있기 때문에, 여러 파장이 다중화된 광신호에서 원하는 파장의 광신호를 선택하기 위해서는 파장 선택 필터 (wavelength selective filter) 가 필요하다. 격자 보조 동방향 결합기 (GACC: Grating-Assisted Codirectional Coupler) 는 전파 상수(propagation constant) 가 서로 다른 두 도파로 사이에서의 광파워 교환이 파장에 의존하는 특성을 가지고 있기 때문에 WDM 시스템에 응용될 파장 선택 필터로서 많은 연구가 되어 왔다$^{(1),(2)}$ . (중략)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.407-412
• /
• 1998

In this paper, we design PHASAR(Phased Array) WDM(Wavelength Dvision Division Multi- and Demultiplexing) filters and evaluate their performance. The PHASAR WDM filter is designed to have flat-passband characteristics by inserting the multimode waveguides between input waveguides and a first star coupler. BPM simulation results show that the excess loss is smaller than 6.5 dB, the crosstalk is less than -22 dB and the 1 dB passband is about 50 GHz. The effect of the path difference error is also investigated.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1911-1913
• /
• 1997

주파수 특성이 뛰어난 광반사기의 구현을 위한 협대역 반사기에 대한 이론적 해석이 이루어졌으며 grating을 사용하여 광공진을 발생시키며 도파로 결합기를 사용하여 공진 신호를 주도파로에서 다른 도파로로 유도하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.201-210
• /
• 1996

In this paper, we analyzed performance of a symbol timing recovery scheme for 16QAM Radio system. As a symbol timing recovery scheme, both maximum amplitude method(MAM) and wave difference method(WDM) are analyzed employing a pulse shaping filter, such as raised cosine filter(RCF) and nonlinear filter(NLF). Simulation result shows that the jitter performance of MAM or WDM using NLF is better than that using square root RCF. In order to estimate and compensate for the Rayleigh fading PSAM(Pilot Symbol Assisted Modulation) and space diversity are also employed. Consequently, BER performance of about $10^{-4}$ is obtained for $E_b/N_o$= 20 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2422-2432
• /
• 1996

In this thesis, we analyze the Broadcast and Select Network(BSN) architecture coming up to the issues among those in the single-hip WDM networks and the degradation of performance in consequence of the traffic imbalance which well be able to be produced in these network. We propose WDM networks architecture which can support concurrency services by using Array Wavelength Tunable Filter(AWTF) with the parrallel hardware structure as a solution. For the sake of multichannel communications, we make use of the Single Control channel, Multiple Data channel(SCMD) scheme that is one of the channel architecture. Also, we compare and analize the throughput of Uniform & Nonuniform traffic conditions, and obtain the optimized number of AWTF being able to guarantee the Quality of Service(QoS) required by the enlargement of WDM netowrks and traffic imbalance. Therefore, we can make it possible that the design of the WDM networks with BSN architecture ensures the optimized performance.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.3
• /
• pp.70-81
• /
• 1998

Fiber-Fabry-Perot (FFP) tunable filters, the essential component of WDM transmission, were designed, fabricated and characterized. Multi-layered thin film mirrors that consists of an optical collimater's corss section as a substrate and TiO$_{2}$SiO$_{2}$ alternating multi-layered films as a filter wer designed by means of the transfer matrix method. Fabricated mirrors showed the high reflectivity over around 98% as expected. After fabricating the tuneable filters using PZT, we measured FSR, FWHM, finesse , crosstalk and insertion loss, confirming that the built devices satisfied the optical filter's specifications required in the SEDM transmission systems.

• Proceedings of the Optical Society of Korea Conference
• /
• 1997.08a
• /
• pp.12-12
• /
• 1997

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1860-1865
• /
• 2008

40Gbps WDMSystems have been studied by numerical simulation to optimize their performance. Standard single mode fiber is assumed, and the most popular modulation format, NRZ, is used for the study. These assumptions are valid when existing WDM systems are required to upgrade their performance to 40Gbps. It is shown that the standard single mode fiber can transmit optical signals over 4800 (BER < 10-15) by optimizing optical and electrical filter characteristics at the receiver and by compensation of dispersion. In addition, when the system performance is mainly limited by ASE noise of EDFAs, it is found that flattop-shaped optical filter at the receiver gives a better result than Gaussian-shaped filter unless the insertion loss of the optical filter is larger than 5dB.