• Title/Summary/Keyword: WDM Network

Search Result 294, Processing Time 0.028 seconds

A FEC Code for Improving the WDM/SCM-PON Performance (WDM/SCM-PON의 성능 향상을 위한 FEC Code)

  • Seol, Dong-Min;Lee, Chul-Soo;Jang, Seung-Hyun;Jung, Eui-Suk;Kim, Byoung-Whi
    • Proceedings of the KIEE Conference
    • /
    • 2005.10b
    • /
    • pp.406-408
    • /
    • 2005
  • A passive Optical Network (PON) is famous for the most cost-efficient solution among the optical networks. This is because there is no active device between a central office and subscribers. A wavelength division multiplexing (WDM) offers each subscriber to feel unlimited bandwidth. A WDM-PON, however, has a cost problem that WDM-PON is used commercially. To solve this trouble, it is surveyed that a Sub-Carrier Multiplexing (SCM) used in a WDM-PON increases the number of subscribers. The performance of WDM/SCM-PON varies with various noises. The several FEC Codes can reduce the effects of noise and improve the performance of the system. Thus, Choosing a suitable FEC code is important work. This paper describes that a Reed-Solomon (RS) code is the most suitable code for WDM/SCM-PON at the object of 100 Mbps and $10^{-9}$ BER

  • PDF

WDM-PON Based on Wavelength Locked Fabry-Perot LDs

  • Lee, Chang-Hee;Mun, Sil-Gu
    • Journal of the Optical Society of Korea
    • /
    • v.12 no.4
    • /
    • pp.326-336
    • /
    • 2008
  • A WDM-PON has been considered as an ultimate solution for access networks. However, there were many technical and practical issues for commercial deployment. These issues were solved with wavelength locked F-P LD and the WDM-PONs employing this optical source were commercialized. These WDM-PON systems have been deployed in Korea, Europe, and US. We reviewed wavelength locking technology and WDM-PON achievements. When we inject spectrum sliced broadband light into an F-P LD, the multimode output is changed to a quasi single mode. Then, we can use the single mode light for WDM signal transmission. The broad spectral gain of the semiconductor gain medium enables a color-free operation of WDM-PON, i.e., an identical ONT can be used for each user. The wavelength locking properties depend on many parameters, especially alignment of injection wavelength to a lasing mode, passband profile of AWG and front facet reflectivity of F-P LD. However, these dependencies can be reduced by proper design of the laser and the injection bandwidth. Thus, WDM-PON systems have been achieved with color-free operation.

A multistage wavelength division multiplexed passive optical network (다단 분기 파장분할 다중방식 수동형 광가입자망)

  • Park, Kun-Youl;Park, Jae-Hyoung;Kim, Geun-Young;Kim, Jin-Hee
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2008.08a
    • /
    • pp.112-115
    • /
    • 2008
  • The multistage wavelength division multiplexed passive optical network (WDM-PON) with multiple remote nodes (RN) can accommodate widely spread subscribers efficiently and it increases the channel usage. We implemented a multistage RN using band add-drop filters and it was applied to a wavelength-locked Fabry-Petor laser diode based gigabit WDM-PON.

  • PDF

Dynamic Routing and Wavelength Assignment Algorithm to Improve Energy Efficiency in IP over WDM Network with Multifiber (다중 광섬유 링크를 갖는 IP over WDM 망에서 에너지 효율 향상을 위한 동적 경로 배정 및 파장 할당 알고리즘)

  • Lee, Ki-Beom;Kang, Keun-Young;Kim, Do Young;Kim, Young-Chon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39C no.4
    • /
    • pp.370-379
    • /
    • 2014
  • Recently, the interest in optical network with multifiber link is continuing to rise since the network traffic has been growing exponentially. However, growing traffic in network leads to increasing the energy consumption of the network equipment. In this paper, we propose a dynamic routing and wavelength assignment (RWA) algorithm based on V-like cost function and layered graph to improve energy efficiency in IP over WDM network with multifiber link. The V-like cost function is used to decide the fiber cost according to the number of used wavelengths. The layered graph with multifiber link is used to select the energy efficient route and wavelength. The proposed RWA algorithm is compared and analyzed with conventional algorithm in view of average power consumption and blocking probability through OPNET modeler.

Characteristic Measurement for Ready-Deployed Optical Cable and Simulation for SDH and WDM System Existing Conditions (기포설된 광케이블 특성측정과 이 선로조건에 대한 SDH 및 DWDM 광전송장치 전송특성측정과 시뮬레이션)

  • 이성원;김영범
    • Journal of Applied Reliability
    • /
    • v.1 no.2
    • /
    • pp.121-138
    • /
    • 2001
  • Due to large demand for high speed and great capacity for data transfer, WDM, which uses the wavelength division multiplexing technique, is known as alternative way to satisfy those demand for its flexible network operation and management, easy network expansion with existing networks, and enhancement of efficient data transfer rate. For these reasons, a new high capacity WDM optical communication network plan was established. Therefore, the quality of currently deployed optical cables with 81.6 km in length should be assessed to ensure if high capacity WDM system could be implemented on existing optical cables. Two important characteristic parameters, Transfer Loss and PMD (Polarization Mode Dispersion), were measured to evaluate quality of existing optical cable. Transfer Loss was measured at 0.244 dB per kilometer, which is lower than the design standard value at 0.275 dB/km. The measured PMD value gave at 0.030ps/km, and it, therefore, satisfies the value recommended by ITU-T (International Telecommunication Union-T) of 0.5ps/km. In addition, the transfer characteristic for existing 2.5 Gbps and 10 Gbps system were measured and evaluated, and the results showed that error-free transfer is very much feasible. Computer simulation for DWDM system, which is likely be a future backbone network in Korea, to assess the transfer characteristic using the same condition employed for 2.5 Gbps and 10 Gbps was carried out as well. The simulation verified that a stable network operation and reliable service could be provided.

  • PDF

Joint routing, link capacity dimensioning, and switch port optimization for dynamic traffic in optical networks

  • Khan, Akhtar Nawaz;Khan, Zawar H.;Khattak, Khurram S.;Hafeez, Abdul
    • ETRI Journal
    • /
    • v.43 no.5
    • /
    • pp.799-811
    • /
    • 2021
  • This paper considers a challenging problem: to simultaneously optimize the cost and the quality of service in opaque wavelength division multiplexing (WDM) networks. An optimization problem is proposed that takes the information including network topology, traffic between end nodes, and the target level of congestion at each link/ node in WDM networks. The outputs of this problem include routing, link channel capacities, and the optimum number of switch ports locally added/dropped at all switch nodes. The total network cost is reduced to maintain a minimum congestion level on all links, which provides an efficient trade-off solution for the network design problem. The optimal information is utilized for dynamic traffic in WDM networks, which is shown to achieve the desired performance with the guaranteed quality of service in different networks. It was found that for an average link blocking probability equal to 0.015, the proposed model achieves a net channel gain in terms of wavelength channels (𝛾w) equal to 35.72 %, 39.09 %, and 36.93 % compared to shortest path first routing and 𝛾w equal to 29.41 %, 37.35 %, and 27.47 % compared to alternate routing in three different networks.

Performance Analysis of Metro WDM Star Network based on An Arrayed Waveguide Grating

  • Kirmani, Syed Abdul Mannan;Shin, Seo-Yong;Yang, Hyo-Sik;Azeemi, Naeem Zafar
    • Journal of the Optical Society of Korea
    • /
    • v.12 no.4
    • /
    • pp.346-350
    • /
    • 2008
  • In this paper, we analyze the performance of a reliable, scalable, and cost-effective switchless wavelength division multiplexing (WDM) network based on an arrayed waveguide grating (AWG). The network efficiency is significantly increased by spatially reusing wavelengths and exploiting multiple free spectral ranges (FSRs) of the AWG employed in the architecture. We have analyzed the performance of this architecture by simulating in $Optsim^{TM}$ with a control channel which exploits the broadband light source, i.e., an LED. The data was successfully transmitted to a distance of 30 km without using any EDFA's in the network, with a reasonable BER of $4.0530{\times}10^{-14}$. We have analyzed the performance of this architecture with a control channel which exploits the broadband light source, i.e., an LED, by simulating in $Optsim^{TM}$.

Wavelength Division Multiplexing Passive Optical Network Technology (WDM PON 기술)

  • Park, J.D.;Jung, E.S.;Kim, B.K.;KIm, T.J;Yoo, J.J.;Kim, B.W.;Kim, B.T.
    • Electronics and Telecommunications Trends
    • /
    • v.19 no.6 s.90
    • /
    • pp.43-54
    • /
    • 2004
  • WDM-PON은 가입자망의 트래픽 병목 현상을 해결하고, 다양한 서비스 품질을 제공하면서 고속화된 데이터 전송을 위해 가입자 당 독립 파장을 할당함으로써 가입자의 요구 대역에 제한을 받지 않으며, 보안성이 보장되는 차세대 WDM 기반 수동형 광가입자망이다. 특히 고성능, 저가인 광소자를 포함한 광모듈의 조기개발이 FTTH 네트워크 초기 시장 및 서비스를 선점하는 척도가 될 것으로 예상된다. 본 논문은 WDM 기반 수동형 광가입자망 동작 방식, 광다중화기 및 역다중화기, 그리고 WDM -PON과 WDM 다중화 기술인WDM/TDM, WDM/SCM, WDM/CDM을 포함한 다양한 광 수동 가입자망 구성 기술을 소개한다.

A Market Trend and Technical Issues on Optical Components for DWDM Network (DWDM네트워크용 광부품의 시장전망 및 기술적 과제)

  • 정기태;송길호
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.92-93
    • /
    • 2000
  • WDM전송망은 지금까지 주로 장거리 기간망에 점대점 형태로 적용되어 왔다. 그러나 최근 예측을 훨씬 상회하는 인터넷 수요의 폭발적 증가로 인하여 매트로 네트워크 및 가입자영역에 이르기까지 WDM전송망 구축의 필요성이 대두되고 있다. WDM네트워크 적용영역을 구분하면 아래와 같다. (중략)

  • PDF