• Journal of the Korean institute of surface engineering
• /
• v.47 no.5
• /
• pp.269-274
• /
• 2014

Electroless plating process as a solution deposition method is a viable means of preparing conductive metal films on non-conducting substrates through chemical reactions. In the present study, the preparation and properties of electroless Ni-plating on flexible silicone rubber are described. The process has been performed using a conventional Ni(P) chemical bath. Additives and complexing agents such as ammonium chloride and glycine were added and the reaction pH was controlled by NaOH aqueous solution. Ni deposition rate and crystallinity have been found to vary with pH and temperature of the plating bath. It was shown that Ni-films having the high crystallinity, enhanced adhesion and optimum electric conductivity were formed uniformly on silicone rubber substrates under pH 7 at $70^{\circ}C$. The conductive Ni-plated silicone rubber showed a high electromagnetic interference shielding effect in the 400 MHz-1 GHz range.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.25-31
• /
• 2010

In this study, we investigated the morphology and thermal stability of interfacial phases in joint between lead free solder(Sn-3.0Ag-0.5Cu) and electroless Ni-W-P under bump metallizations(UBM) with different tungsten contents as a function of thermal aging. Content of phosphorus of each deposits was fixed at 8 wt.%, and content of tungsten was variated each 0, 3, 6 and 9 wt.%. Specimens were prepared by reflowing at $255^{\circ}C$, aging range was $200^{\circ}C$ and up to 2 weeks. After reflow process, in the electroless Ni(W)-P/solder joint, the interfacial intermetallic compound(IMC) was showed both $(Cu,Ni)_6Sn_5$ and $(Ni,Cu)_3Sn_4$. UBM and generated IMC at the interface of lead free solder was proportionally increased with aging time. The thickness of IMC was increased because the generation rate of $Ni(W)_3P$ decreased with increasing contents of W.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.2
• /
• pp.203-212
• /
• 2022

In this paper, we propose to identify the factors and satisfaction of the selection of University and departments of One university freshmen. Research subjects were 499 freshmen in 2021 at K University located in G city. The data were analyzed by descriptive statistics, t-test, ANOVA, Scheffe' test and pearson's correlation coefficient using SPSS WIN 18.0. The results of this study showed that the internet/SNS was the highest in university information media, the school teacher was the highest in information provider, and the employment rate had the most impact on university registration decision. The University satisfaction score was 3.43, and there was a significant difference in gender(t=5.527, p=.019) and admission type(F=5.527, p<.001). The department satisfaction was 3.86 and there was a significant difference in the admissions type(F=3.004, p=.018). Univdrsity satisfaction and Department satisfaction showed a significant positive correlation(r=5.527, p<.001). Universities should improve their competitiveness through systematic admission information system.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.19-23
• /
• 2007

The blue emitting OLEDs using TMP-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl) phosphonate] host and DJNBD-1 dopant have been fabricated and characterized. In the device fabrication, 2-TNATA [4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as a hole injection material and NPB [N,N'-bis(1-naphthyl)N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as a hole transport material were deposited on the ITO(indium tin oxide)/glass substrate by vacuum thermal evaporation method. Followed by the deposition, blue color emission layer was deposited using TMP-BiP as a host material and DJNBD-1 as a dopant. Finally, small molecule OLEDs with structure of $ITO/2-TNATA/NPB/TMP-BiP:DJNBD-l/Alq_3/LiF/Al$ were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. The effect of dopant into host material of the blue OLEDs was studied. The blue OLEDs with DJNBD-1 dopant showed that the maximum current and luminance were found to be about 34 mA and $8110\;cd/m^2$ at 11 V, respectively. In addition, the color coordinate was x=0.17, y=0.17 in CIE color chart, and the peak emission wavelength was 440 nm. The maximum current efficiency of 2.15 cd/A at 7 V was obtained in this experiment.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.760-765
• /
• 2013

Lysozyme crystallization was performed by using flow-focusing chip in droplet-based microfluidic system. Water-in-oil droplets were formed in the system and collected on petri-dish and cross type mold. Liquid-liquid reaction of lysozyme and sodium chloride occurred in the droplet and crystals were observed through microscope. Solution pH was varied as 4.8 and 7.2. Crystals of polyhedron and plate-like shape were obtained at pH 4.8, while needle structure crystals formed at pH 7.2. Lysozyme in single droplet for two pHs were crystallized with constant or decreased droplet size. However, crystals at pH 4.8 were only obtained in the droplet of which size was increased by the interaction between droplets. Droplet volume did not change at pH 7.2 and crystals formed in both droplets.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.2
• /
• pp.272-279
• /
• 2006

The gene encoding Thermus sp. T351 alkaline phosphatase (T351 APase) was cloned and sequenced. The gene consisted of 1,503 bp coding for a protein with 500 amino acid residues including a signal peptide. The deduced amino acid sequence of T351 APase showed relatively low similarity to other Thermus APases. The T351 APase gene was expressed under the control of the T7lac promoter on the expression vector pET-22b(+) in Escherichia coli BL21 (DE3). The expressed enzyme was purified by heat treatment, and $UNO^{TM}$ Q and $HiTrap^{TM}$ Heparin HP column chromatographies. The purified enzyme exhibited high activity at extremely alkaline pHs, reaching a maximum at pH 12.0. The optimum temperature of the enzyme was $80^{\circ}C$, and the half-life at $85^{\circ}C$ was approximately 103 min. The enzyme activity was found to be dependent on metal ions: the addition of $Mg^{2+}$ and $CO^{2+}$ increased the activity, whereas EDTA inhibited it. With p-nitrophenyl phosphate as the substrate, T351 APase had a Michaelis constant ($K_{m}$) of $3.9{\times}10^{-5}M$. The enzyme catalyzed the hydrolysis of a wide variety of phosphorylated compounds.

• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.530-543
• /
• 2018

This study investigated the effect of yellow, black, and brown mustard seeds on color, lipid oxidation (thiobarbituric acid-reactive substances [TBARS]), and microbiological and sensory qualities of meatballs during storage. Heat treatment of mustard seeds affected the TBARS value of meatball samples (p<0.0001). The addition of mustard seeds decreased TBARS value of meatball samples (p<0.0001). Heat treatment of mustard seeds decreased the $L^*$, $a^*$ and $b^*$ values of meatball samples (p<0.0001). The meatball samples with mustard seeds increased $b^*$ value of meatball samples however it decreased $a^*$ value of meatball samples (p<0.0001). The addition of mustard seeds decreased aerobic mesophilic bacteria count (p<0.0001), Enterobacteriaceae count (p<0.0001), psychrophilic bacteria count (p<0.0001) and yeast and mold count of meatball samples (p<0.0001). On a given storage day, the yellow mustard added meatballs sample was given higher color, appearance, flavor, acceptability ratings than those added black and brown mustard. Regarding sensory and microbiological properties, mustard seed contributed to microbiological quality and sensorial properties of meatball samples.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.219-219
• /
• 2013

The effect of an electron blocking layer (EBL) on V-I curves in GaN/InGaN multiple quantum well is investigated. For the first time, we found that curves were intersected at 3.012 V and analyzed the reason for intersection. The forward voltage in LEDs with an p-AlGaN EBL is larger than without p-AlGaN EBL at low injection current because the Mg doping efficiency for p-GaN layer was higher than that of p-AlGaN layer. However, the forward voltage in LEDs with an p-AlGaN EBL is smaller than without p-AlGaN EBL at high injection current because the carriers overflow from the active layer when injection current increases in LEDs without p-AlGaN EBL and in case of LED with p-AlGaN EBL, the carriers are blocked by EBL.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.58-65
• /
• 2006

The applicability of the waste pulp which produced in the paper recycling process as an adsorbent for the treatment of $Ni^{2+}$ ion in wastewater has been investigated taking the initial concentration of adsorbate, temperature, the amount of adsorbent, and solution pH as the experimental variables. In addition, the effect of the concentration of coexisting solute and pre-treatment of adsorbent on the adsorbability of $Ni^{2+}$ ion were also examined. The electrokinetic potential of waste pulp was observed to be positive below pH 7.8 and negative above this pH. The adsorption reaction of $Ni^{2+}$ ion reached its equilibrium within 4 hours after the reaction was initiated and the adsorbed amount of adsorbate was found to increase with its initial concentration. The adsorbability of $Ni^{2+}$ was raised with temperature so that its adsorption reaction was considered to be exothermic, which was substantiated by thermodynamic calculation. Also, the adsorbed amount of $Ni^{2+}$ was raised with the amount of waste pulp and with pH in the range of pH $3{\sim}6$. This behavior of the adsorption of $Ni^{2+}$ according to the solution pH was well agreed with the electrokinetic characteristics of waste pulp in solution. The amount of coexisting solute was observed to reversely affect on the $Ni^{2+}$ adsorption onto waste pulp under the experimental conditions. With regard to the pre-treatment of adsorbent with NaOH, the adsorbability of $Ni^{2+}$ was increased with the concentration of NaOH to a certain extent. However, it was found to decrease contrarily when the concentration of NaOH became too high.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.10a
• /
• pp.246.1-246
• /
• 1979

A glucose-limited “pH-stat” continuous culture study of Lactobacillus bulgaricus NLS-4 in an anaerobic condition showed the marked effects of environmental pH on end products, fermentation blances and bioenergetic aspects of the organism. Lactic acid was the major end product of fermentation with minor products, such as acetic acid, formic acid and ethanol throughout the pH range tested. In acidic conditions below pH 6.5, a typi-cal pattern of homofermentation was revealed whereas in alkaline conditions, the metabolic pattern was changed from homofermentation to heterofermentation and led to acquire much energy. This metabolic change was likely due to the pH-dependent lactate dehydrogenase activity. Molar growth yields (Yglc=35.5-44.4) and YATP, $18.5\pm2.5$ in average which was 80％ higher than the value ever postulated seemed to be accounted for less requirement of maintenance energy of the organism in the culture conditions.