• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.1008-1012
• /
• 2008

오염 지하수 처리를 위한 획기적인 방법으로 높은 반응성을 가진 나노영가철이 최근 주목을 받고 있다. 그러나 미세한 분말형태로 인하여 현장공법에 적용이 제한되어 나노영가철을 입자형태의 지지체에 부착시켜서 투수성을 유지하여 실용성을 높인 방법이 제시되었다. 본 연구에서는 지지체의 존재 하에 생성된 나노영가철이 제조방법에 따라 어떤 특성의 변화를 보이는지 분석하고 이에 따른 반응성의 차이를 평가하였다. 지지체로는 이온교환수지를 선택하였으며 분산제를 포함한 에탄올/물의 이중용매를 사용하여 나노영가철을 제조한 후 그것의 물리적, 화학적 특성 및 반응성을 기존의 물만을 사용하여 제조한 경우와 비교하였다. 이중용매 상에서 제조된 반응물질은 비표면적이 $38.10m^2/g$, 철함량이 22.4 mg Fe/g 으로 수용액상에서 제조된 반응물질 보다 비표면적과 철 함량이 각각 20%와 23% 증가하였으며 질산성질소를 이용한 반응성 평가에서도 $0.462h^{-1}$의 반응상수값을 보이며 61% 증가한 반응성을 나타냈다. 단위표면의 반응상수 또한 증가하여 단위 면적에서의 반응성도 향상된 나노영가철을 얻을 수 있었다. 제조된 반응물질은 높은 반응성과 지지체의 사용으로 실제 오염 지하수 등의 처리에서 유용하게 사용될 수 있을 것으로 기대되어진다.

• 한국수자원학회논문집
• /
• 제54권11호
• /
• pp.903-913
• /
• 2021

홍수기 하천에서 유량측정은 예산, 인력, 안전 및 측정 시 편의성 등의 이유로 측정에 제한이 많다. 특히, 태풍 등으로 인한 호우사상 발생 시 위와 같은 문제로 홍수량 측정에 어려움이 따른다. 이러한 문제점을 개선하기 위해 본 연구에서는 드론(Drone)과 전자파표면유속계(Surface velocity doppler radar)의 기능을 조합하여 최소 인력으로 짧은 시간에 간편하고, 안전하게 홍수기에 하천유량을 측정할 수 있는 방법을 개발하였다. 기존 드론을 이용한 유량측정 연구에서 도출된 바람, 강우 등 기상 요인에 의한 드론의 기계적인 한계를 극복하기 위해 본 연구에서는 IP56 등급의 방진·방수 성능, 최대 36 km/h의 풍속에서 안정적인 비행능력과 최대 10 kg을 탑재할 수 있는 드론을 개발하였다. 또한 전자파표면유속계 측정에 있어서 주요 제약 요소인 진동을 제거하기 위해 드론과 전자파표면유속계를 결합하는 댐퍼플레이트를 개발하였다. 이들 비행장비와 유속계를 결합시킨 유속계 DSVM (Dron and Surface Veloctity Meter using doppler radar)을 제작하였으며, 봉황천(금강 제1지류)에 위치한 금산군(황풍교)지점에서 DSVM을 운용하여 홍수량을 측정한 결과 ±3.5%의 오차가 발생하였다. 또한 측정된 표면유속으로부터 평균유속을 산정할 때 정확도 향상을 위해 ADCP를 이용하여 동시 측정하고, 평균유속을 비교하여 평균유속환산계수(0.92)를 산정하였다. 본 연구에서는 드론과 전자파표면유속계를 결합해 측정한 유량과 ADCP 및 봉부자를 이용해 측정한 유량을 비교하고, DSVM의 적용 및 활용 가능성을 확인하였다.

• 생태와환경
• /
• 제39권1호통권115호
• /
• pp.119-130
• /
• 2006

연속배양의 평형 정상상태 조건에서 담수조류 Microcystis aeruginosa의 최대생장률 (${\mu}_m$)과 세포내 영양염의농도(Q)의 관계, 질소 결핍 상태에서 액체배지에서 영양염 농도(S)와 홉수율(V)의 관계를 각각 조사하였다. 질소제한조건에서 M. aeruginosa의 세포 당 $Q_{0N}$은 0.04 pmol $cell^{-1}$. ${\mu}_m$은 1.1 $day^{-1}$였고, 제한조건에서 최저값 $Q_{0N}$과 충분조건에서 $Q_N$을 탄소기준하여 각각 6.1 ${\mu}mol$ mg $C^{-1}$ 및 9.5${\sim}$12.4 ${\mu}mol$ mg $C^{-1}$였다. 다른 미세조류와 비교f'1면 세포의 질소 함량이 매우 높았고 질소 결핍시에도 그 함량이 높게 유지되어 질소 요구도가 높은 종이었다 질소 제한조건에서 영양염 홉수 측정 결과에서 반포화계수($K_s$)와 최대흡수율 ($V_m$)은 각각 36 ${\sim}$ 61 ${\mu}M$ 및 0.28 ${\sim}$ 0.35 ${\mu}mol\;cell\;{\cdot}\;hr^{-1}$ 범위였다. M. aeruginosa의 $K_5$값은 매우 높았고 $V_m$도 높은 편이었다. $K_s$와 흡수력 $V_m$은 미세조류의 영양상태 즉 영양염의 세포내 함량(Q)이나 제한영양염의 결핍의 강도의 영향을 받고 미세조류 생장균과도 관련이 있다. M. aeruginosa는 다른 미세조류에 비하여 세포내 질소 함량과 생장률이 높기 매문에 질소와 인에 대한 횹수율이 높을 것이다. 그러나 질소 흡수력의 반포화계수 $K_s$값이 높고 $V_m/K_s$비율은 낮아 수게에서 질소가 저농도 일 때에는 다른 미세조류와 비교하면 경쟁력이 떨어지고 질소에 대한 기질 친화력은 약한 것으로 나타났다. 낙동강 하류지역에서 M. aeruginosa가 대발생하는 시기에 수중 영양염의 농도 변동은 M. aeruginosa의 영양생리 kinetics 특성과 잘 부합하는 것으로 나타났다.

• 생태와환경
• /
• 제33권2호통권90호
• /
• pp.109-118
• /
• 2000

서해안의 신도시 및 산업단지 근교에 위치한 시화호에서 유입지천 부근의 상류부터 최하류에 해당하는 수문까지 8개 지점에서 1999년에 수중 무기영양염과 식물플랑크톤 변동을 매월 1${\sim}$2회씩 조사하였다. 수환경 요인 중 NH$_{4}$, SRP 및 SRSi의 평균농도는 각각 522.7 ${\mu}$g N/l, 9.8 ${\mu}$g P/l 및 0.16 mg Si/l수준이었다. 무기영양염은 유역에서 강우가 있은 직후에 호소내부로 다량 유입되어 수질을 매우 악화시켰고 상류에서 하류로 갈수록 급격하게 감소되는 경향을 보였다. 반면에 NO$_{3}$는 상${\cdot}$하류간에 큰 차이가 없었고 동계에 비교적 높았다. Chl-a는 평균값이 37.2 ${\mu}$g/l (최대 142.5 ${\mu}$g/l)로서 상류부에서 높았고 증감 양상으로 볼 때 NH$_{4}$, SRP 및 SRSi 영양염의 변동과 밀접한 관련성이 있었다. 식물플랑크톤은 추계와 동계에 규조류와 프라시노조류가 많았고 하계에는 와편모조류가 풍부하였다. 계절에 따른 주요 우점종은 규조류 Skeletonema costatum, 와편모조류 Prorocentrum minimum, 은편모조류 Chroomonas spp., 유글레나조류 Eureptiella gymnastica 및 프라시노조류 Pyramimonas spp.가 해당하였다. 시화호는 해수유입 후에 중${\cdot}$하류와는 달리 상류부에서 풍부한 영양염을 기반으로 만성적인 식물플랑크톤의 대발생이 지속적으로 관찰되고 있어 생태학적 관점으로 볼 때 이에 대한 유입하천의 수질관리가 매우 중요하고 시급한 것으로 판단되었다. 남조세균의 활력이 떨어질 때 그 역할이 더욱 두드러진다는 사실을 알 수 있었다.온(9.11%), 총 인(7.67%), 엽록소 a (6.20%)가 양의 영향을 나타내었다.리고 NO$_{2}$-N (19.75%)가 양의 영향을, NO$_{3}$-N (28.30%)가 음의 영향을 미치고 있으며, 기수역(정점 5${\sim}$정점 12)에서는 수온(29.49%), NO$_{3}$-N (28.27%) 그리고 NO$_{2}$-N (22.87%)가 양의 영향을 미치고 있는 반면, 전도도 (30.18%)와 DO (13.53%)는 음의 영향을 미치고 있었다. 보인다.업용 저수지의 수질예측에 있어는 복잡한 유출모형이나 유역모형, 호소수질모형 등을 사용하기보다는 본 연구에서와　같이 기존자료를 분석하여 도출한 경험적 관계식을 사용하면 비교적 적은 노력으로도 상당히 신뢰성있게 예측하여 수질관리에 도움이 될 수 있을 것으로 판단된다.가 정화효율과의 상관관계보다 좀더 유의성 있게 나타났다. 이것은 높은 수리학적 부하조건이 영양염류 등의 정화효율에는 크게 영향을 미치지 않음을 보여주고 있으며, 따라서 비교적 낮은 농도의 영양염류를 가지고 있고, 많은 처리수량을 요구하는 부영양화된 저수지의 수질개선을 위해서는 높은 수리학적 부하조건에서 시간당 정화량을 늘리는 관리방법이 경제적이며, 이에 초점을 맞추어 나가야 할 것으로 사료된다.도로 검출되어 이를 고려한정수공정의 관리가 필요하리라 생각된다.$yr^{-1}$)의 71%가 감소되어야 할 필요성이 제기되었다. 또한 여름철 심층 산소 고갈이 야기되었고, 이 시기에 퇴적물로 용출된 인이 식물플랑크톤 성장에 이용될 수 있기때문에 퇴적물에 대한 관리도 수행될 필요가 있다.rsity)지수는 2000년 7월에 2.22로 가장

• KSBB Journal
• /
• 제21권3호
• /
• pp.204-211
• /
• 2006

IFN-${\gamma}$의 대량생산을 위한 기초연구로서 IFN-${\gamma}$의 아미노 말단에 glucagon과 ferritin을 융합파트너로 각각 결합시켜 재조합 IFN-${\gamma}$의 발현을 유도하였다. 대장균 내에서 발현되는 IFN-${\gamma}$는 그 자체로 매우 강한 소수성 결합의 양상을 나타내어 inclusion body 형태로 발현된다고 알려져 있으나 OrigamiTM(DE3) 균주로부터 50% 이상의 수용성 형태로 발현시켰다. IFN-${\gamma}$로부터 융합파트너를 제거할 수 있는 system을 개발하기 위해 융합파트너와 IFN-${\gamma}$ 사이에 enterokinase cleavage site를 도입하였으며, enterokinase에 의해 IFN-${\gamma}$에는 영향을 미치지 않고 효과적으로 융합파트너를 제거할 수 있었다. 재조합 IFN-${\gamma}$의 분리 및 정제를 위해 발현벡터상의 융합파트너와 IFN-${\gamma}$사이에 6X His-tag을 도입하였고 융합파트너의 N-말단에도 6X His-tag을 추가적으로 도입함으로써 융합파트너와 더불어 enterokinase에 의해 분해되지 않은 융합단백질을 Ni-NTA agarose column으로 제거함으로서 IFN-${\gamma}$를 완전 정제할 수 있었다. IFN-${\gamma}$의 발현을 유도하는 발현유도체로서 15 mM lactose를 이용하여 5 L 발효조에서 IFN-${\gamma}$의 발현을 검토한 결과, 재조합 균체의 단위 건조질량(dry cell weight, g)으로 약 11 g DCW/L 수준의 재조합 융합단백질을 얻을 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• Asia pacific journal of information systems
• /
• 제20권2호
• /
• pp.125-155
• /
• 2010

Ontologies have been adopted in various business and scientific communities as a key component of the Semantic Web. Despite the increasing importance of ontologies, ontology developers still perceive construction tasks as a challenge. A clearly defined and well-structured methodology can reduce the time required to develop an ontology and increase the probability of success of a project. However, no reliable knowledge-engineering methodology for ontology development currently exists; every methodology has been tailored toward the development of a particular ontology. In this study, we developed a Graduation Screen Ontology (GSO). The graduation screen domain was chosen for the several reasons. First, the graduation screen process is a complicated task requiring a complex reasoning process. Second, GSO may be reused for other universities because the graduation screen process is similar for most universities. Finally, GSO can be built within a given period because the size of the selected domain is reasonable. No standard ontology development methodology exists; thus, one of the existing ontology development methodologies had to be chosen. The most important considerations for selecting the ontology development methodology of GSO included whether it can be applied to a new domain; whether it covers a broader set of development tasks; and whether it gives sufficient explanation of each development task. We evaluated various ontology development methodologies based on the evaluation framework proposed by G$\acute{o}$mez-P$\acute{e}$rez et al. We concluded that METHONTOLOGY was the most applicable to the building of GSO for this study. METHONTOLOGY was derived from the experience of developing Chemical Ontology at the Polytechnic University of Madrid by Fern$\acute{a}$ndez-L$\acute{o}$pez et al. and is regarded as the most mature ontology development methodology. METHONTOLOGY describes a very detailed approach for building an ontology under a centralized development environment at the conceptual level. This methodology consists of three broad processes, with each process containing specific sub-processes: management (scheduling, control, and quality assurance); development (specification, conceptualization, formalization, implementation, and maintenance); and support process (knowledge acquisition, evaluation, documentation, configuration management, and integration). An ontology development language and ontology development tool for GSO construction also had to be selected. We adopted OWL-DL as the ontology development language. OWL was selected because of its computational quality of consistency in checking and classification, which is crucial in developing coherent and useful ontological models for very complex domains. In addition, Protege-OWL was chosen for an ontology development tool because it is supported by METHONTOLOGY and is widely used because of its platform-independent characteristics. Based on the GSO development experience of the researchers, some issues relating to the METHONTOLOGY, OWL-DL, and Prot$\acute{e}$g$\acute{e}$-OWL were identified. We focused on presenting drawbacks of METHONTOLOGY and discussing how each weakness could be addressed. First, METHONTOLOGY insists that domain experts who do not have ontology construction experience can easily build ontologies. However, it is still difficult for these domain experts to develop a sophisticated ontology, especially if they have insufficient background knowledge related to the ontology. Second, METHONTOLOGY does not include a development stage called the "feasibility study." This pre-development stage helps developers ensure not only that a planned ontology is necessary and sufficiently valuable to begin an ontology building project, but also to determine whether the project will be successful. Third, METHONTOLOGY excludes an explanation on the use and integration of existing ontologies. If an additional stage for considering reuse is introduced, developers might share benefits of reuse. Fourth, METHONTOLOGY fails to address the importance of collaboration. This methodology needs to explain the allocation of specific tasks to different developer groups, and how to combine these tasks once specific given jobs are completed. Fifth, METHONTOLOGY fails to suggest the methods and techniques applied in the conceptualization stage sufficiently. Introducing methods of concept extraction from multiple informal sources or methods of identifying relations may enhance the quality of ontologies. Sixth, METHONTOLOGY does not provide an evaluation process to confirm whether WebODE perfectly transforms a conceptual ontology into a formal ontology. It also does not guarantee whether the outcomes of the conceptualization stage are completely reflected in the implementation stage. Seventh, METHONTOLOGY needs to add criteria for user evaluation of the actual use of the constructed ontology under user environments. Eighth, although METHONTOLOGY allows continual knowledge acquisition while working on the ontology development process, consistent updates can be difficult for developers. Ninth, METHONTOLOGY demands that developers complete various documents during the conceptualization stage; thus, it can be considered a heavy methodology. Adopting an agile methodology will result in reinforcing active communication among developers and reducing the burden of documentation completion. Finally, this study concludes with contributions and practical implications. No previous research has addressed issues related to METHONTOLOGY from empirical experiences; this study is an initial attempt. In addition, several lessons learned from the development experience are discussed. This study also affords some insights for ontology methodology researchers who want to design a more advanced ontology development methodology.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권4호
• /
• pp.633-638
• /
• 2017

방사선 진료기술의 발전에 따라 의료분야에서 발생하는 방사성폐기물이 급속히 증가하고 있다. 최근의 경향을 보면, 갑상선암 진료 목적의 I-131을 비롯하여 PET/CT 조영제로 사용하는 F-18, 핵의학검사에 폭 넓게 적용하는 Tc-99m 등의 방사성동위원소 사용이 일반화 되고 있다. 사용과정에서 이러한 핵종에 오염된 방사성폐기물이 발생하게 되는데, 일정기간 보관한 후에 방사능이 규제해제(Clearance) 수준으로 감쇠하면 소각 등의 방법으로 자체처분하게 된다. 국제원자력기구(IAEA)에서는 $10{\mu}Sv/y$의 개인선량 및 1man-Sv/y의 집단선량과 함께 핵종별 농도에 근거하여 방사성폐기물의 규제해제기준을 제시하였다. 이 연구에서는 IAEA의 핵종별 방사능농도기준에 따른 규제해제 시점을 확인하기 위하여, Tc-99m과 방사화학상유사한 성질을 가지고 있는 Re-186 관련 방사성폐기물을 수집하여 방사능을 측정하였다. Re-186은 반감기가 3.8일로 방사성의약품으로는 비교적 길고, 베타선 및 감마선을 방출하여 방사성의약품 치료와 영상에 모두 사용된다. Re-186 사용과 관련하여 발생하는 오염된 일회용장갑(Poly Glove)의 방사능측정을 위하여 다중파고분석기(Multi Channel Analyzer; MCA)를 이용하였으며, 이를 위하여 표준물질을 제작하여 MCA를 교정한 이후 감마방사능 측정절차에 따라 수행하였다. 측정결과를 근거로 방사능 감쇠 유도식을 산출하여 이론식과 대비하여 고찰하였는바, Re-186 핵종의 유도반감기(3.6일)는 이론적 반감기(3.8일)에 비해 다소 짧은 것으로 나타났다. 따라서 측정결과에 근거한 유도반감기를 적용한다면, 다소 줄어든 기간 동안 Re-186 핵종 폐기물을 보관하였다가 자체처분을 할 수 있을 것으로 확인하였다. 이 연구 결과는 현재 추진하고 있는 국제표준화기구(International Organization for Standardization) 국제표준에 포함될 예정이다.

• 원예과학기술지
• /
• 제32권1호
• /
• pp.123-128
• /
• 2014

This study investigated the exercise intensity and energy expenditure involved in two gardening activities (planting transplants and sowing seeds in a garden plot) and four common physical activities (running, skipping rope, walking, and throwing a ball) in children. Eighteen children aged 11 to 13 years (mean age, $12.3{\pm}0.7$ years) participated in this study. The children made two visits to a high tunnel in Cheongju, Chungbuk, South Korea and performed randomly selected activities. Each activity was performed for 10 min, with a 5-min rest period between activities. The children wore a Cosmed $K4b^2$ (Cosmed $K4b^2$; Cosmed, Rome, Italy), which is a portable calorimetric monitoring system, to measure indicators of metabolic cost such as oxygen uptake and energy expenditure. The children's heart rates during the activities were measured by radiotelemetry (Polar T 31; FitMed, Kempele, Finland). We found that the two gardening and four physical activities performed by the 11-13 years old children in this study were moderate-to high-intensity physical activities [i.e.,$5.4{\pm}0.7$ to $9.1{\pm}1.4$ metabolic equivalents (METs)]. Running ($9.1{\pm}1.4$ METs) and skipping rope ($8.8{\pm}1.1$ METs) were high-intensity physical activities, whereas walking ($6.1{\pm}0.9$ METs), planting transplants ($5.8{\pm}1.1$ METs), throwing a ball ($5.6{\pm}1.1$ METs), and sowing seeds ($5.4{\pm}0.7$ METs) were moderate intensity physical activities. Running and skipping rope were significantly more intense than the other activities (P < 0.0001). The gardening tasks such as planting transplants and sowing seeds in a garden plot showed similar exercise intensities and energy costs as walking and throwing a ball. This study indicates that gardening can be used as a physical activity intervention to provide health benefits similar to more common physical activities such as walking and running.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권11호
• /
• pp.4637-4642
• /
• 2014

Background: Hypoxia-inducible factor $1{\alpha}$ (HIF-$1{\alpha}$) plays an important role in regulating cell survival and angiogenesis, which are critical for tumor growth and metastasis. Genetic variations of HIF1A have been shown to influence the susceptibility to many kinds of human tumors. Increased expression of HIF-$1{\alpha}$ has also been demonstrated to be involved in tumor progression. However, the prognostic value of single nucleotide polymorphisms (SNPs) inthe HIF1A gene remains to be determined in most cancer types, including colorectal cancer (CRC). In this study, we sought to investigate the predictive role of HIF1A SNPs in prognosis of CRC patients and efficacy of chemotherapy. Materials and Methods: We genotyped two functional SNPs in HIF1A gene using the Sequenom iPLEX genotyping system and then assessed their associations with clinicopathological parameters and clinical outcomes of 697 CRC patients receiving radical surgery using Cox logistic regression model and Kaplan Meier curves. Results: Generally, no significant association was found between these 2 SNPs and clinical outcomes of CRC. In stratified analysis of subgroup without adjuvant chemotherapy, patients carrying CT/TT genotypes of rs2057482 exhibited a borderline significant association with better overall survival when compared with those carrying CC genotype [Hazard ratio (HR), 0.47; 95% confidence interval (95% CI): 0.29-0.76; P < 0.01]. Moreover, significant protective effects on CRC outcomes conferred by adjuvant chemotherapy were exclusively observed in patients carrying CC genotype of rs2057482 and in those carrying AC/CC genotype of rs2301113. Conclusions: Genetic variations in HIF1A gene may modulate the efficacy of adjuvant chemotherapy after surgery in CRC patients.