• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.33-38
• /
• 2004

This study was performed to know watertightness and reduction effect and crack occurred by hydration heat, restraint of multiplication of hydration heat, through mechanical test, strength test and crack control test using fluosilicate salt based inorganic compound made from by-product during phosphoric acid manufacturing process. Mix proportions for experiment were modulated at 0.45 of water to cement ratio and $0.5-2.0\%$ of adding ratio of fluosilicate salt based inorganic compound. Evaluation for watertightness of concrete was carried out permeability, absorption test and porosity analysis. Effect of crack reduction was evaluated by length, drying shrinkage as well as stress change of hardened concrete at unrestraint/restraint state and also elucidated crack pattern on the concrete surface. It is ascertained that characteristics of crack resistance and watertightness for concrete was improved by an adequate addition of fluosilicate salt based inorganic compound.

• Geomechanics and Engineering
• /
• v.20 no.6
• /
• pp.517-525
• /
• 2020

The long-term stability of rock engineering is significantly affected by the time-dependent deformation behavior of rock, which is an important mechanical property of rock for engineering design. Although the hard rocks show small creep deformation, it cannot be ignored under high-stress condition during deep excavation. The inner mechanism of creep is complicated, therefore, it is necessary to investigate the relationship between microscopic creep mechanism and the macro creep behavior of rock. Microscopic numerical modeling of sandstone creep was performed in the investigation. A numerical sandstone sample was generated and Parallel Bond contact and Burger's contact model were assigned to the contacts between particles in DEM simulation. Sensitivity analysis of the microscopic creep parameters was conducted to explore how microscopic parameters affect the macroscopic creep deformation. The results show that the microscopic creep parameters have linear correlations with the corresponding macroscopic creep parameters, whereas the friction coefficient shows power function with peak strength and Young's modulus, respectively. Moreover, the microscopic parameters were calibrated. The creep modeling curve is in good agreement with the verification test result. Finally, the creep curves under one-step loading and multi-step loading were compared. This investigation can act as a helpful reference for modeling rock creep behavior from a microscopic mechanism perspective.

• Geomechanics and Engineering
• /
• v.23 no.4
• /
• pp.301-311
• /
• 2020

In this study, shear strength behavior of fine-grained soils was investigated under unsaturated conditions. The samples in the unsaturated state were subjected to a net normal stress (σ-u_a) of 40 kPa and different matric suctions (u_a-u_w) of 50, 100 and 150 kPa. The matric suction values applied in the triaxial tests were selected according to the bubbling pressures determined from the SWC curves. The study was carried out on prepared re-constituted cylindrical samples by uniaxial consolidation of soil slurries. First, consolidated drained (CD) triaxial compression tests were performed on the saturated samples and the cohesion and angle of internal friction were determined. After that, drained triaxial compression tests under matric suctions were performed on the unsaturated samples. In order to obtain unsaturated test results, cohesion and internal friction angle values of saturated samples were used. The nonlinear surface representing the shear strength surface was approximated consisting of two planes (double planar surface). The reason for the nonlinear behavior of some soils is that the amount of sand content contained in it is relatively high and the bubbling pressure/permanent water content value is relatively low.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.244-252
• /
• 1999

Intensive selection for muscle development and against fat deposition in pigs during the last 50 years has contributed to the increased incidence of porcine stress syndrome (PSS) and pale soft exudative pork (PSE). Genetics, nutrition and management, preslaughter animal handling, stunning, dehairing and carcass chilling influence the incidence and magnitude of the PSE condition. The normal incidence of PSE has been reported to range from 10 to 30%, but in some isolated instances is up to 60%. The elimination of halothane-positive pigs in breeding programs has reduced PSS and PSE. Further improvements in meat quality by terminal sire evaluation and selection can be achieved within halothane-negative populations because around 20% of the variation in meat color and water binding capacity seems to be genetically related. Pre-slaughter handling on the farm, during transit to the packing plant and at the packing plant can greatly influence the meat quality, contributing 10 to 25% of the variation. An effective stunning method, skinning instead of scalding/dehairing and rapid post-slaughter chilling further reduce the incidence of PSE pork. In addition to proper care and handling a carcass-merit based marketing system, that reflected the value differential between desirable and undesirable meat quality in the pricing system for pigs, would provide a great incentive to change pork production systems in order to improve meat quality, thus improving the image and usefulness of pork as food.

• Preventive Nutrition and Food Science
• /
• v.20 no.2
• /
• pp.133-136
• /
• 2015

Freshwater softshell turtle (Trionyx sinensis) extract has been used traditionally as a tonic soup, and to recover from physical fatigue. To support these claims, the forelimb grip strength of mice was measured after feeding a soft-shell turtle extract for 7 days. The T. sinensis extract significantly increased the grip strength to $1.25{\pm}0.07N$ (P<0.01), which is 16.8% higher than the force on day 0. After exercising, the blood glucose levels in extract-fed mice were 202% higher and urea levels were 73% lower, which were both significantly different than the levels observed after control treatment. Lactate dehydrogenase was significantly higher by 314%, and glutathione peroxidase increased by 165%. In addition, the obesity markers, serum triglyceride and cholesterol, decreased to 62% and 49%, respectively, after mice were fed the extract. These data show that the T. sinensis extract provided more energy for forelimb exercise, prevented protein catabolism and muscle fatigue, and decreased the oxidative stress caused by an exhaustive workout.

• Preventive Nutrition and Food Science
• /
• v.20 no.2
• /
• pp.137-142
• /
• 2015

Rheological properties of thickened fluids used for consumption by people with dysphagia (swallowing difficulty) are very sensitive to several factors, such as thickener type, temperature, pH, sugar, protein, and NaCl. In this study, steady and dynamic rheological properties of thickened water samples mixed with five commercial xanthan gum-based food thickeners (A~E) were studied in the presence of NaCl at different concentrations (0.3%, 0.6%, 0.9%, and 1.2%). The magnitudes of apparent viscosity (${\eta}_{a,50}$), consistency index (K), yield stress (${\sigma}_{oc}$), and dynamic moduli (G' and G") showed significant differences in rheological behaviors between thickened samples with various NaCl concentrations. Dynamic moduli values of all thickened samples, except for samples with thickener C, were much higher than those of the control (0% NaCl). All rheological parameter values (K, G', and G") in a thickener A were much higher than those in other thickeners. These results suggest that rheological properties of thickened samples containing NaCl are strongly affected by xanthan gum-NaCl interaction and depended on the type of thickener.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1316-1322
• /
• 2000

Data were compiled and statistically analyzed on the lactation of 50% and 75% Thai native-Friesian crossbred and purebred Friesian cows that were fed at a national institute in Chiang Mai, Thailand. More than 30% higher milk production was obtained in the 75% crossbred compared with that in the 50%, but this amount of milk production in the upgraded breed was still about half that of purebred Friesians; 2,138 kg, least squares means during an average lactation period of 279 days in the 50% crossbred, 2,847 kg during 277 days in the 75% crossbred and 5,585 kg during 308 days in the purebred. Environmental stress due to tropical climate was alleviated by the use of electric fans and water sprinklers in the feeding house during the hot season, and improved diet seemed to enable purebred Friesians to keep their ability to produce a milk quantity of more than 6,500 kg per year. This special care was not given to crossbreds and significantly negative correlations were found between daily minimum temperature and humidity during the initial 100 days of lactation and total milk production and average daily milk yield in the 75% crossbreds. However, these correlations were not found in the 50% crossbreds.

• Journal of Korean Academy of Nursing
• /
• v.16 no.3
• /
• pp.78-96
• /
• 1986

The sympathico-adrenergic system and the hypophyseal-adrenocortical system mediates the regulation of the internal milieu. And the kidneys regulate both water and electrolyte balance of the body fluid. The kidneys are the sites of production of renin which participate indirectly in maintaining renin. angiotensin-aldosterone system. These system de-serve special attention in the context of adjustment the effects on the body function. And so, maximal exercise and work load are associated with home-osthetic function. The nurses working in the hospital have been complained of fatigue and stress by frequent duty changes and overload. In order to define this, the possible changes of hormonal excretion during three-shift nursing practice were investigated. Urine samples were collected at pre-duty and post-duty, and were measured with chemical assay and radioimmunoassay in 30 nursing students, in nursing practice and 43 nursing students, in studying. The results obtained were as follows. 1. In nursing practice, urinary norepinephrine concentration showed a marked increase during day duty, urinary cortisol concentration showed a marked increase during evening duty, and urinary renin concentration was increased in night duty, 2. Corrected ratio of urinary sodium excreted by the urinary excretion of creatinin (UNa/UCr) and UCl/UCr showed a marked decrease during night duty. Nursing practice did not affect on the UK/UCr and urinary concentrating ability. From these results, it is suggested that further studies the define the effects on some physiological function of the three-shift nursing practice against circadian rhythm are needed for better working condition of nurses.

• Journal of computational fluids engineering
• /
• v.10 no.2
• /
• pp.48-53
• /
• 2005

This work discusses the numerical analysis, the design and experimental test of the SMA actuator along with its capabilities and limitations. Convective heating and cooling using water actuate the SMA(Shape memory alloy) element of the actuator. The fuel such as propane, having a high energy density, is used as the energy source for the SMA actuator in order to increase power and energy density of the system, and thus in order to obviate the need for electrical power supplies such as batteries. The system is composed of a pump, valves, bellows, a heater(burner), control unit and a displacement amplification device. The experimental test of the SMA actuator system results in 150 MPa stress(force : 1560 N) with $3\%$ strain and 0.5 Hz. actuation frequency. The actuation frequency is compared with the prediction obtained from numerical analysis. For the designed SMA actuator system, the results of numerical analysis were utilized in determining design parameters and operating conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.100-103
• /
• 2003

The primary insulation system used in an oil-filled transformer is kraft paper, wood, porcelain and oil. Modern transformers use paper that is chemically treated to improve its tensile strength properties and resistance to aging caused by immersion in oil. But these insulation papers are mainly aged to thermal stress. Over the course of the insulation paper and oil's life it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper using the layer insulation. We made two aging cell in which thermal aging tests of insulation papers and mineral oil are conducted. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.