• The korean journal of orthodontics
• /
• v.29 no.1 s.72
• /
• pp.83-94
• /
• 1999

The purpose of this study was to evaluate the changes of cancellous and cortical bone and the effect of estrogen in ovariectomized rats. Fifty female rats, 250gm in body weight, were divided into three groups : ovariectomized group(OVE), ovariectomized and estrogen-injected group(OVE-EST), and sham operated and estrogen-injected group(EST). Bilateral ovariectomy was performed at the onset of the experiment. In OVE-EST group and EST group, estrogen was injected $50{\mu}g/kg$ B.W. every other days from 3 weeks after surgery to sacrifice. Each five rats were sacrificed after 5, 6, 7 weeks. One side of mandibular body was radiographed with a soft x-ray apparatus(Hitex Co., Ltd., Japan). Thereafter the obtained microradiographs were used for the morphometric analysis using a Image analyzer. The morphometric analysis was perforrmed for parameters such as total bone area, cortex bone area and medullary bone area. The other side of the mandibular bone was decalcified and embedded in paraffin as using a general method. The specimens were sectioned and stained with Mallory's anilline blue and observed light microscopically. The results were as follows. 1 In all groups, the proportion of cortex to total bone area was not significantly different. 2. In ovariectomized(OVE) group, the proportion of marrow cavity to medullary bone area increased significantly from 5 to 7 weeks(p<0.05). In ovariectomized and estrogen-injected(OVE-EST) group, it decreased significantly at 7 weeks, and in estrogen-injected(EST) group, it decreased significantly from 6 weeks(p<0.05). 3. Microradiogram and histopathologic findings revealed that marrow cavity was enlarged and osteoclasts were observed around irregular bone surface in OVE group. In OVE-EST group, the size of marrow cavity at 7 weeks was similar to that of control group. In EST group, as dense trabecular bone increased from 5 to 7 weeks, marrow cavity decreased.

• Clean Technology
• /
• v.17 no.2
• /
• pp.124-133
• /
• 2011

In addition to six substances regulated in EU RoHS including lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE), priority substances are identified in new RoHS II as hexabromocyclododecane (HBCDD), dibutyl phthalate (DBP), butyl benzyl phthalate (BBP) and diethylhexyl phthalate (DEHP). In this study, 20 plastic samples were collected from 12 domestic electrotechnical companies and levels of four restricted substances were determined by gas chromatography-mass spectrometry, Among 20 parts that compose washer, refrigerator or microwave oven, HBCDD was detected in three samples of NBR material with the amount of 42~381 mg/kg while DBP and BBP was not detected in any samples collected respectively, implying that these substance may not be used widely in plastic materials for EEE. However, DEHP was detected in all samples of NBR, PP, PBT, EPDM and PVC materials with the amount of 42 up to 59,400 mg/kg that exceeds the limit value of 0.1 wt% (1,000 mg/kg). Presence of a restricted substance in polymer material makes a great negative influence on a number of final product. To cope with coming RoHS II as well as REACH, action not to use DEHP in plastic material or the relevant notification in case of REACH seems to be needed. Screening test of Arsenic compounds such as diarsenic pentaoxide, diarsenic trioxide, lead hydrogen arsenate, triethyl arsenate that are included in REACH SVHC was done by ICP measurement Arsenium was detected in four samples made of NBR and PBT materials in the level of 15~700 mg/kg. By considering the screening method used in this study, the amount of arsenium compounds in the thermistor made of PBT material has a high chance of exceeding the regulated limit value.

• Journal of Life Science
• /
• v.20 no.8
• /
• pp.1254-1260
• /
• 2010

Microorganisms near the plant rhizosphere usually inhabit the surface or the inside of the plant roots and have a direct effect on plant growth by secreting plant growth promoters or antagonistic materials which protect the root zone system from various pathogens. This study was carried out to identify and isolate the antagonistic materials after isolation of microorganisms showing high antagonistic activities, in hopes of contributing to the development of sustainable agriculture and the preservation of agricultural environments. A number of antagonistic bacteria were isolated from paddy soil. Among isolates, RRj 228 showed plant growth promotion and antagonistic activity. RRj 228 was identified as Pseudomonas sp. according to the results of physiological properties and genetic methods. On the basis of the results of anti-fungal spectrum against several pathogens by RRj 228, the antagonistic effect of the isolate against Botrytis cinerea, Pythium ultimum, Phytopthola capsici, and Rhizoctonia solani, especially against red-pepper anthracnose caused by Colletotrichum acutatum, was remarkable. The experiment evaluating the biological control effect by RRj 228 revealed that the $ED_{50}$ value by the RRj 228 culture against C. acutatum, R. solani and P. ultimum were 0.14 mg/ml, 0.16 mg/ml and 0.29 mg/ml, respectively. An antagonistic substance was isolated and purified by several chromatographies from the RRj 228 culture. The $^1H$ and $^{13}C$ assignment of the antagonistic substance was achieved from two-dimensional $^1H-^1H$ COSY, HMQC, and HMBC. Finally, the antagonistic substance was identified as Phenazine-1-carboxylic acid ($C_{13}H_8N_2O_2$, M.W.=224).

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.131-146
• /
• 2004

The Purpose of this study is to suggest strategies for environmental education through the Practical Arts(TechnologyㆍHome economics) Subject in a viewpoint of the clothing & textiles resources to resolve problems in the clothing life area. For this, this study was carried out through review of literature which is related with the consumption, the environmental problems, the environmental policies, and regulations of the government and new environmental technologies, of clothing & textiles industries and environmental education. The major findings of the study were as follows; 1) The environmental education system model in a viewpoint of the Clothing & Textiles resources was developed. This model system is consisted with interactions on school, government, industry, home and non-government organizations. Thus, the fact that Practical Arts(TechnologyㆍHome economics) Subject were the most effective subject to teaching the environmental education viewpoint of the Clothing & Textiles resources was confirmed. 2) The standards were analysed out to analyse the contents in the clothing area of the Practical Arts(TechnologyㆍHome economics) Subject. It were consist of 4 factors and 12 elements under the factors: Awareness of clothing & textile resources(clothing consumption, production of clothing & textile and environmental problems). Planning and buying of clothing(planning, buying), Management of clothing(understand of textile. human body & environment, laundering and Environmental pollution, arrangement & conservation) Recycling & exhaust of clothing(contribution, redesign, recycling, exhaust) 3) Analysing the current Practical Arts (TechnologyㆍHome economics) subject from the Environmental education in the clothing section, the environmental education related with clothing were taught the most in the middle school course, and environmental contents were concentrated in the recycling factors. but not so much on other factors. 4) After analysing the Practical Arts (TechnologyㆍHome economics) subject, the strategies were suggested for reinforcing the environmental education in the clothing of the Practical Arts(TechnologyㆍHome economics) subject.

• Korean Journal of Poultry Science
• /
• v.34 no.3
• /
• pp.173-180
• /
• 2007

This study was conducted to evaluate conjugated linoleic acid (CLA) precursor and produce supplementation on egg production, egg quality and blood immunological parameters in laying hens. The total of 252 (32-wk) Hy-line brown commercial hens were used for 5 weeks. Dietary treatments included 1) CON (basal diet + oat 1% + soybean oil 1%), 2) WOS (basal diet + whey 0.5% + oat 0.5% + soybean oil 1%), 3) WS (basal diet+ whey 1% + soybean oil 1%), 4) WOCLA (basal diet + whey 0.5% + oat 0.5% + CLA produce 1%), 5) WCLA (basal diet + whey 1% + CLA produce 1%) and 6) FOCLA (basal diet + Fish oil 0.5% + oat 1% + CLA produce 0.5%). For 4 weeks egg shell thickness was higher in WOS and FOCLA treatments than WOCLA and WCLA treatments (P<0.05). Egg weight was significantly increased (P<0.05) in WOS and FOCLA treatments compared to WS and WCLA treatments for 4 weeks. From 4 to 5 weeks yolk high, yolk color and haugh unit were significantly higher in FOCLA treatment than CON treatment (P<0.05). IgG concentration of blood was increased in WOS and FOCLA treatments compared to CON, WS and WOCLA treatments(P<0.05). In conclusion, fish oil, CLA produce and oat supplementation in laying hens diet improve egg shell thickness, yolk high, yolk color and haugh unit, also, CLA precursor supplementaion in laying hens diet improve IgG concentration of blood higher than CON treatment.

• Journal of Animal Environmental Science
• /
• v.14 no.1
• /
• pp.31-38
• /
• 2008

Ammonia gas is one of the malodorous gases from swine production facilities, such as manure storage tank, manure fermentation facilities, and livestock houses, etc. Ammonia gas from swine house is being emitted at relatively low concentrations throughout the year. Therefore, livestock facilities were continuously ventilated to supply fresh air for respiration of the animals internal the livestock facilities. The swine facilities need very high ventilation rate to control the inside environmental conditions. The deodorization system of the livestock facilities must be developed considering the ventilation rates. The odor abatement system was installed in order to improve the internal environment of the naturally ventilated growing-finishing pig house. The system which distributes the deodorized air into inner space of the swine house by using plastic duct was installed. Since the internal environment, effected by the operation of the odor abatement system, is monitored by closing the winch curtain installed on the side wall of the pig house, the experiment was practiced at the season when the internal environment becomes aggravated, winter. The effects on the improvement in the internal environment of swine house by operating the odor abatement system are as follows ; 1. By re-distributing the air which was deodorized by the odor abatement system installed in the pig house, the result showed that the concentration of ammonia gas is decreased approximately 33.3% compared with that before operating odor abatement system. 2. The effect on the pig house's ammonia gas reduction was found that the ventilation rate was less than $0.5m^3$/min head. The effect of the operation of the odor abatement system showed to be scarce when the ventilation rate increases because of the influx of external fresh air makes the quantity of diluted air more than those of the odor abatement system. 3. The perishment rate of the pigs which were brooded until slaughtering decreased about 3.8% by operating the odor abatement system in the growing-finishing pig house. Also, after operating the odor abatement system, the stinging of the eyes, suspension dust, etc were decreased when going into swine house for management.

• 한국해양학회지
• /
• v.28 no.3
• /
• pp.212-228
• /
• 1993

A chenier, about 860 m long, 30 to 60 m wide and 0.6∼1.6 m high, occurs on the upper muddy tidal flat in the Gomso bay, western coast of Korea, It consists of medium to fine sands and shells with small amounts of subangular gravels. Vertical sections across the chenier show gently landward dipping stratifications which include small-scale cross-bedded sets. the most probable source of the chenier is considered to be the intertidal sandy sediments. Vibracores taken along a line transversing the tidal flat reveal that the intertidal sand deposits are more than 5 m thick near the low-water line and become thinner toward the chenier. The most sand deposits are undertrain by tidal muds which occur behind the chenier as salt marsh deposits. C-14 age dating suggests that the sand deposits and the chenier are younger than about 1,800 years B.P. The chenier has originated from the intertidal sand shoals at the lower to mid sand flat, and has continuously moved landward. A series of aerial photographs (1967∼1989) reveal that intertidal sand shoals (predecessor of the western part of chenier) on the mid flat have continuously moved landward during the past two decades and ultimately attached to the eastern part of the chenier already anchored at the present position in the late 1960s. Repeated measurements (four times between 1991 and 1992) of morphological changes of the chenier indicate that the eastern two thirds of the chenier, mostly above the mean high water, has rarely moved whereas the western remainder below the mean high water, has moved continuously at a rate of 0.5 m/mo during the last two years (1991∼1992). This displacement rate has been considerably accelerated up to 1.0 m/mo in winter, and during a few days of typhoon in the summer of 1992 the displacement amounted to about 8∼11 m/mo for the entire chenier. these facts suggest that macro-tidal currents, coupled with winter-storm waves and infrequent strong typhoons, should play a major role for the formation and migration of chenier after 1,800 B.P., when the sea level already rose to the present position and thereafter remained constant.

• Radiation Oncology Journal
• /
• v.4 no.1
• /
• pp.15-20
• /
• 1986

From 1979 to 1984, 39 local allograft irradiations were given to 29 patients: 10 irradiations were administered for prevention and 29 for reversal of acute rejection of transplanted kidney. Three doses of 150 cGy every other day were combined with high-dose of methylprednisolone pulse (1 gm/day) for 3 days. For prevention of acute rejection, local irradiation was delivered on the days 1, 3, and 5 after the transplantation, and for reversal, irradiation started after the diagnosis of acute rejection. Eight out of 10 patients irradiated for prevention had acute allograft rejection, and, what is more, there was no surviving graft at 15 months after transplantation. Reversal of acute rejection was achieved in $71\%$. When the pre-irradiation level of serum creatinine was below $5.5mg\%$, the reversal rate was $93\%$, but above $5.5mg\%$ the reversal rate was only $17\%$ (p<0.01). Reirradiation after failure was not successful. Among 15 reversed patients, $7(47\%)$ had subsequent rejection (s). The functional graft survivals at 6 month, 1, 2, and 3 year were $70\%,\;65\%,\; 54\%,\;and\;54\%$, respectively. Therapeutic irradiation resulted in better graft survival when serum creatinine was below $5.5mg\%$ (p<0.001) or when irradiation started within 15 days after the diagnosis of acute rejection (p<0.001).

• 한국데이터정보과학회:학술대회논문집
• /
• 2002.06a
• /
• pp.5-8
• /
• 2002

현재 우리 나라가 사용하고 있는 표준시는 I-시간이다. 이 표준시 사용에 대해 일부 이견이 있어, 우리 나라의 표준시 제도를 확립하기 위해 세계 각국의 표준시의 운용 상황을 분석 검토함으로서 우리나라는 현재 사용 중인 I-시간을 계속적으로 사용하는 것이 타당한 것으로 다음과 같은 결론을 얻을 수 있었다. 1) 세계에서 복수 표준시를 운용하고 있는 나라(러시아 등 9개국)는, 표준시 적용 지역을 태양시에 정확하게 맞추어 결정할 수 있을 것임에도, 3개국만 표준시가 태양시에 거의 일치할 뿐 나머지 6개국은 모두 태양시보다 표준시를 앞세워 적용하고 있다. 2) 세계 15대 대 영토국 중 단일표준시를 운용하고 있는 나라(중국 등 6개국) 중에서 3개국이 대체로 표준시가 태양시에 일치할 뿐이고, 나머지 3개국은 표준시를 태양시보다 $1{\sim}2$시간 이상이나 앞세워 적용하고 있다. 3) 전 세계의 145개 주요 단일 표준시 사용국 중 약 5%(중동의 지중해 연안국들과 동유럽의 일부 국가들) 정도에서 표준시를 태양시보다 30분 정도 늦춰 적용할 뿐이고, 태양시와 비슷하게 운용하는 나라는 약 56%, 표준시를 30분 이상 앞세워 적용하고 있는 나라는 약 39% 정도로서 대체로 태양시보다 빠른 표준시를 긍정적으로 받아들이고 있다. 4) 캐나다와 미국의 경우는 각 주에서 정한 표준시와는 다르게 운영하고 있는 지방들이 있는데, 이들 모두가 지리적인 위치로 보아 태양시보다 표준시가 어느 정도 빠르게 운영되도록 조정한 경우들이다. 5) 세계에서 UTC와 비 정수 시간차의 표준시를 운용하는 지역과 국가는 7개소 정도이다. 이들 중 표준시를 태양시에 맞추어 설정한 경우가 6개소이고, 지리적인 위치로 보아 표준시와 태양시가 일치할 수 있는데도 표준시를 30분 정도를 빠르게 운용하기 위해 조정한 경우가 1개소이다. 6) 세계에서 서머타임을 적용하고 있는 최저위도 국가는 북반구에서는 북회귀선에 걸쳐 있는 Mexico와 Cuba, 남반구에서는 Brazil의 남회귀선에 걸쳐 있는 남반부인데 이들은 모두 태양시와 일치하는 표준시를 운용하는 나라들이다. 한편 서머타임을 적용하고 있지 않는 최고위도 국가는 북반구에서는 Iceland, 남반구에서는 Argentina인데, 이 두 나라는 모두 이미 표준시를 태양시보다 1시간 이상 빠르게 적용하고 있는 나라들이다. 7) 복수 표준시간을 운용하고 있는 Canada와 미국에서는 국가적으로는 서머타임을 운용하고 있는데도 서머타임을 운용하고 있지 않는 주가 Canada에는 1개주, 미국에는 3개 주가 있는데, 이들은 모두 표준시가 태양시보다 30분${\sim}$1시간 정도 빠르게 적용되고 있는 곳이다. 8) 세계의 많은 나라가 표준시를 태양시보다 30분${\sim}$1시간 또는 그 이상까지도 빠르게 적용하고 있다는 사실, 그리고 세계의 많은 나라에서 서머타임을 시행하고 있다는 사실을 보면 태양시보다 표준시를 어느 정도 빠르게 적용해 생활하는 것은 인간 생체리듬에 악영향을 미치지 않으면서 오히려 시간 이용을 효율화하는 장점이 있는 것으로 판단된다. 9) 현재 우리나라는 경도 $135^{\circ}E$를 기준으로 하는 I-시간을 사용하고 있으면서 I-시간대역의 서쪽경계에 위치하여 태양시보다 표준시가 30분 정도 빠르다. 이는 한국인의 생체리듬에 결코 나쁜 영향을 주지 않으며, 오히려 시간을 효율적으로 사용할 수 있는 장점으로 작용하고 있는 것으로 판단된다. 아울러 여름철에 일광절약시간(서머타임)제의 필요성을 완화시켜줌으로서 표준시를 안정적으로 운용하는데 크게 기여하고 있다. 이는 표준시를 UTC와 정수시간차를 유지하면서 안정적으로 운영하려는 세계 각국의 표준시 운영 경향과도 일치하고 있다. 10) 우리나라가 사용하는 I-시간이 우리에게 이상과 같은 장점을 가지고 있음에도 불구하고 이 I-시간이 일제의 잔재라거나 또한 한국인의 생체리듬에 해롭다는 이유를 들어 우리 나라의 표준시를 경도 $127.5^{\circ}W$ 기준의 H'시간으로 변경시킨다면UTC와의 8시간 30분차 시간을 운영하게 됨으로서 국제화 시대를 사는데 큰 불편을 초래할 뿐만 아니라, 추가적으로 서머타임제를 도입하게 되는 등 커다란 부작용을 겪게 될 것이다.

• The Magazine of the IEIE
• /
• v.29 no.6
• /
• pp.76-80
• /
• 2002

'Liquid Crystal의 상전이(相轉移)와 광학적 이방성(異方性)이 1888년과 1889년 F. Reinitzer와 O. Lehmann에 의해 Monatsch Chem.과 Z.Physikal.Chem.에 각각 보고된 후 부터 제2차 세계대전이 끝난 뒤인 1950년대 까지는 Liquid Crystal을 단지실험실에서의 기초학문 차원의 연구 대상으로만 다루어 왔다. 1963년 Williams가 Liquid Crystal Device로는 최초로 특허 출원을 하였으며, 1968년 RCA사의 Heilmeier등은 Nematic 액정(液晶)에 저주파(低周波) 전압(電壓)을 인가하면 투명한 액정이 혼탁(混濁)상태로 변화하는 '동적산란(動的散亂)'(Dynamic Scattering) 현상을 이용하여 최초의 DSM(Dynamic Scattering Mode) LCD(Liquid Crystal Display)를 발명하였다. 비록 150V 이상의 높은 구동전압과 과소비전력의 특성 때문에 실용화에는 실패하였지만 Guest-Host효과와 Memory효과 등을 발견하였다. 1970년대에 이르러 실온에서 안정되게 사용 가능한 액정물질들이 합성되고(H. Kelker에 의해 MBBA, G. Gray에 의한 Cyano-Biphenyl 액정의 합성), CMOS 트랜지스터의 발명, 투명도전막(ITO), 수은전지등의 주변기술들의 발전으로 인하여 LCD의 상품화가 본격적으로 이루어지게 되었다. 1971년에는 M. Shadt, W. Helfrich, J.L. Fergason등이 TN(Twisted Nematic) LCD를 발명하여 전자 계산기와 손목시계에 응용되었고, 1970년대 말에는 Sharp에서 Dot Matrix형의 휴대형 컴퓨터를 발매하였다. 이러한 단순 구동형의 TN LCD는 그래픽 정보를 표시하는 데에는 품질의 한계가 있어 1979년 영국의 Le Comber에 의해 a-Si TFT(amorphous Silicon Thin Film Transistor) LCD의 연구가 시작되었고, 1983년 T.J. Scheffer, J. Nehring, G. Waters에 의해 STN(Super Twisted Nematic) LCD가 창안되었고, 1980년 N. Clark, S. Lagerwall 및 1983년 K.Yossino에 의해 Ferroelectric LCD가 등장하여 LCD의 정보 표시량 증대에 크게 기여하였다. Color화의 진전은 1972년 A.G. Ficher의 셀 외부에 RGB(Red, Green, Blue) filter를 부착하는 방안과, 1981년 T. Uchida 등에 의한 셀 내부에 RGB filter를 부착하는 방법에 의해 상품화가 되었다. 1985년에는 J.L. Fergason에 의해 Polymer Dispersed LCD가 발명되었고, 1980년대 중반에 이르러 동화상(動畵像) 표시가 가능한 a-Si TFT LCD의 시제품(試製品) 개발이 이루어지고 1990년부터는 본격적인 양산 시대에 접어들게 되었다. 1990년대 초에는 STN LCD의 Color화 및 대형화(大型化) 고(高)품위화에 힘입어 Note-Book PC에 LCD가 본격적으로 적용이 되었고, 1990년대 후반에는TFT LCD의 표시품질 대비 가격경쟁력 확보로 인하여 Note-Book PC 시장을 독점하기에 이르렀다. 이후로는 TFT LCD의 대형화가 중요한 쟁점으로 부각되고 있고, 1995년 삼성전자는 당시 세계최대 크기의 22' TFT LCD를 개발하였다. 또한 LCD의 고정세(高情細)화를 위해 Poly Si TFT LCD의 개발이 이루어졌고, 디지타이져 일체형 LCD의 상품화가 그 응용의 폭을 넓혔으며, LCD의 대형화를 위해 1994년 Canon에 의해 14.8', 21' 등의 FLCD가 개발되었다. 대형화 방안으로 Tiled LCD 기술이 개발되고 있으며, 1995년에 Sharp에 의해 21' 두장의 Panel을 이어 붙인 28' TFT LCD가 전시되었고 1996년에는 21' 4장의 Panel을 이어 붙인 40'급 까지의 개발이 시도 되었으며 현재는 LCD의 특성향상과 생산설비의 성능개선과 안정적인 공정관리기술을 바탕으로 삼성전자에서 단패널 40' TFT LCD가 최근에 개발되었다. Projection용 디스플레이로는 Poly-Si TFT LCD를 이용하여 $25'{\sim}100'$사이의 배면투사형과 전면투사형 까지 개발되어 대형 TV시장을 주도하고 있다. 21세기 디지털방송 시대를 맞아 플라즈마디스플레이패널(PDP) TV, 액정표시장치 (LCD)TV, 강유전성액정(FLCD) TV 등 2005년에 약 1500만대 규모의 거대 시장을 형성할 것으로 예상되는 이른바 '벽걸이TV'로 불리는 차세대 초박형 TV 시장을 선점하기 위하여 세계 가전업계들이 양산에 총력을 기울이고 있다. 벽걸이TV 시장이 본격적으로 형성되더라도 PDP TV와 LCD TV가 직접적으로 시장에서 경쟁을 벌이는 일은 별로 없을 것으로 보인다. 향후 디지털TV 시장이 본격적으로 열리면 40인치 이하의 중대형 시장은 LCD TV가 주도하고 40인치 이상 대화면 시장은 PDP TV가 주도할 것으로 보는 시각이 지배적이기 때문이다. 그러나 이러한 직시형 중대형(重大型)디스플레이는 그 가격이 너무 높아서 현재의 브라운관 TV를 대체(代替)하기에는 시일이 많이 소요될 것으로 추정되고 있다. 그 대안(代案)으로는 비교적 저가격(低價格)이면서도 고품질의 디지털 화상구현이 가능한 고해상도 프로젝션 TV가 유력시되고 있다. 이러한 고해상도 프로젝션 TV용으로 DMD(Digital Micro-mirror Display), Poly-Si TFT LCD와 LCOS(Liquid Crystals on Silicon) 등의 상품화가 진행되고 있다. 인터넷과 정보통신 기술의 발달로 휴대형 디스플레이의 시장이 예상 외로 급성장하고 있으며, 요구되는 디스플레이의 품질도 단순한 문자표시에서 그치지 않고 고해상도의 그래픽 동화상 표시와 칼라 표시 및 3차원 화상표시까지 점차로 그 영역이 넓어지고 있다. <표 1>에서 보여주는 바와 같이 LCD의 시장규모는 적용분야 별로 지속적인 성장이 예상되며, 새로운 응용분야의 시장도 성장성을 어느 정도 예측할 수 있다. 따라서 LCD기술의 연구개발 방향은 크게 두가지로 분류할 수 있으며 첫째로는, 현재 양산되고 있는 LCD 상품의 경쟁력강화를 위하여 원가(原價) 절감(節減)과 표시품질을 향상시키는 것이며 둘째로는, 새로운 타입의 LCD를 개발하여 기존 상품을 대체하거나 새로운 시장을 창출하는 분야로 나눌 수 있다. 이와 같은 관점에서 현재 진행되고 있는 LCD기술개발은 다음과 같이 분류할 수 있다. 1) 원가 절감 2) 특성 향상 3) New Type LCD 개발.