• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2107-2112
• /
• 2006

As growing up of elderly population, the interesting on healthcare system in normal life using W is increasing. An integrated u-healthcare service architecture with IEEE 802.11 and IEEE 802.15.4 based sensor network and code divisi(m multiple access(CDMA) public mobile telecommunication networks was designed and developed. Sensor nodes with electrocardiogram(ECG), body core temperature sensors are attached on the patients' body. The healthcare parameters are transferred to web server via CDMA mobile network or through existed LAN network. The existed LAN network is suggested to be used for continuous monitoring of patient's health status in hospital while mobile networks can be used for general purpose at home or outdoor where infra networks unavailable. This system enable healthcare personal to be able to continuously access, review, monitor and transmit the patients information whereever they are, whenever they want. And immediately check their status by using cellular phone and obtain detail information by communication with medical information server through CDMA. By using this developed integrated u-healthcare service architecture, we can monitor patients' health status for 24 hours.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.213-219
• /
• 2012

Recently, we are simultaneously exposed by various electromagnetic sources due to an increase of mobile communication services. However, EMF(Electric, Magnetic and Electromagnetic Field) study has been performed mainly about only single frequency. The objective of this paper is to develop an multiple-frequency exposure system for in vitro experiment. The exposure unit for in vitro experiments was designed by radial transmission line type to get broadband characteristics to generate signals of CDMA at 836.5 MHz and WCDMA at 1950 MHz frequency simultaneously. The modulated signals were delivered to the conical antenna through amplifier, digital attenuator and RF combiner. SAR values were obtained by the averaged values of 3 measured values at 9 points in petri dish using the fiber optic temperature probe. The measured return loss was under -15 dB. For 1 W input power, the mean value and standard deviation of SAR were $0.105{\pm}0.019$ for the CDMA frequency and $0.262{\pm}0.055$ for the WCDMA frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2007

In this paper, we have designed and fabricated a small size wide-band monopole antenna which can integrate the frequency of previous business mobile communication system by adding 4 PCS of post type parasitic element on top-loaded sleeve monopole antenna. We have observed the properties of return loss upon a parameter change of element, and we also examined radiation properties in the band of PCS, W-CDMA, WiBro, W-LAN and S-DMB in order to make sure the suggested antenna's wide-band properties. We have found that the proposed antenna has omni-direction in horizontal plane and figure eight-direction in vertical plane, and we could have good return loss($Return\;loss{\leq}-10\;dB$) and $1.14{\sim}3.66\;dBi$ gain in $1.67{\sim}3.55\;GHz$ of frequency range($B/W{\fallingdotsep}72%$).

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.89-91
• /
• 2007

In this paper, a remote monitoring system of wind-photovoltaic hybrid generation system using mobile phone and internet has been developed. Many kinds of data can be acquired, analyzed and saved automatically by this system. The hybrid system is composed of 1[kW] PV with DC/DC converter, battery banks and 5[kW] wind power system with power inductor and AC/DC converter. In addition, wind monitoring sensors, voltage and current meters, current transformers and potential transformers are used as accessory instruments. All of these signals are fed into DAQ (Data Acquisition) board after converting the data which have been processed by many types of converters, dividing circuits and signal conditioning circuits. These data can not only be displayed on a computer, transmitted using the server program to remote computer and saved on a computer as a file day by day but also be sent as a CDMA message. The monitored-data can be downloaded, analyzed and saved from server program in real-time via mobile phone or internet at a remote place. All of the programs were designed with LabVIEW software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1677-1685
• /
• 2001

In this paper, we propose a call admission control scheme that can be performed within guaranteeing of required QoS(Quality of Services) in DS-CDMA(Direct Sequence-Code Division Multiple Access) reverse link. It has been performed rely on a physical channel numberonly and based on quality of received signal from MODEM(modulator/demodulator) part in established study. In other methods, the standard for services would have been set from statistical analysis of users\` location and using received power level in BTS(Base Transceiver Station). These ways bring about not only system loads but time delay or great differences from real environment. To solve these problems, we propose a call drop rate estimation algorithm for the purpose of call admission control based on measured value at LNA(Low Noise Amplifier) ports of BTS(Base Transceiver Station) in real time. This method proposed in this paper estimates a quality of offered service in real time, reduce system loads and shorten time delay which is needed to determine the standard for call admission control. But it requires a additional 17W complexity which can measure received signal power in BTS and estimate call drop rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.209-212
• /
• 2002

The realization for code domain analyzing system on WCDMA is presented. This system is realized with the RF, FPGA and DSP processor. The FPGA firgures out the scambling code, and DSP produces the power of code domain using OVSF. The experiment results allow the code domain power accuracy to keep $\pm$1dB low. This system leads to split the text, sound and image signal.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.142-147
• /
• 1998

Recently, 8 kb/s CS-ACELP coder of G.729 is atandardized by ITU-T SG15 and it has been reported that the speech quality of G729 is better than or equal to that of 32kb/s ADPCM. However G.729 is the fixed rate speech coder, and it does not consider the property of voice activity in mutual conversation. If we use the voice activity, we can reduce the average bit rate in half without any degradations of the speech quality. In this paper, we propose an efficient variable rate algorithm for G.729. The variable rate algorithm consists of two main subjects, the rate determination algorithm and algorithm, we combine the energy-thresholding method, the phonetic segmentation method by integration of various feature parameters obtained through the analysis procedure, and the variable hangover period method. Through the analysis of noise features, the 1 kb/s sub rate coder is designed for coding the background noise signal. So, we design the 4 kb/s sub rate coder for the unvoiced parts. The performance of the variable rate algorithm is evaluated by the comparison of speed quality and average bit rate with G.729. Subjective quality test is also done by MOS test. Conclusively, it is verified that the proposed variable rate CS-ACELP coder produced the same speech quality as G.729, at the average bit rate of 4.4 kb/s.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.573-580
• /
• 2002

Within the security architecture of the 3GPP system there is a standardised integrity algorithm f9. The integrity algorithm f9 computes a MAC to authenticate the data integrity and data origin of signalling data over a radio access link of W-CDMA IMT-2000. f9 is a variant of the standard CBC MAC based on the block cipher KASUMI. In this paper we provide the provable security of f9 We prove that f9 is secure by giving concrete bound on an adversary's inability to forge in terms of her inability to distinguish the underlying block cipher from a pseudorandom permutation.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.299-302
• /
• 2001

무선 이동 네트워크 환경을 이용하여 특정교역에 산재해 있는 노상 및 노외 유·무료 주자창의 무인 요금징수장비를 실 시간으로 제어·관리하여 이용자에게 휴대용 컴퓨터 핀 셀룰러폰을 통해 정보를 제공할 수 있는 주차관리시스템을 제안한다. 본 논문에서 각 요금징수장비는 현재 상용화되어 있는 각 통신사의 PCS 또는 Cellular Phone의 COMA SMS(Code Division Multiple Access Short Message Service)를 이용하여 장비의 상태 및 제어 기법을 제안하였으며, 이 경우 추가적인 무선망 관리장비가 필요 없이 mobile phone만을 이용하기 때문에 아직 일반화되지 않은 고비용의 무선패킷통신을 대신할 수 있어 향후 S/W 교체만으로 전환 가능하여 보다 유용한 기법이 될 것으로 기대 된다.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.109-113
• /
• 2001

Presently, an inductor adapted at MMIC (Monolithic Microwave Integrated Circuit) which is used for cellular phone or PHS operates at quasi-microwave range over 800 MHz. However, a W-CDMA (Wideband Code Division Multiple Access) will use about 2 GHz range. Therefore magnetic film device should be compatible up to 2 GHz. We have deposited Co-Pd-Al-O system film using rf sputtering method which is expected up to 2 GHz, and investigated the effect of Pd content and magnetic field annealing. When Pd composition is 19%, Hk was 118 Oe, and ${\mu}$′showed flat frequency characteristics up to 1.5 GHz. The Q factor (=${\mu}$′/${\mu}$") was 23.3 at 1 GHz, 6.7 at 1.5 GHz and 1.5 at 2 GHz, respectively. Resonance frequency was 2 GHz. Therefore Co-Pd-Al-O thin film could be used at over 1 GHz, and also expected as an inductor material for wide band CDMA type cellular phone.