• Journal of Nutrition and Health
• /
• v.28 no.1
• /
• pp.5-14
• /
• 1995

The present study was performed to investigate the effect of cereal fiber on lipid concentration of liver and serum in rats. Male Sprague-Dawley rats weighing 180$\pm$4g were divided into five groups by completely randomized block design : R, BR, B, W, and F. Each group fed a diet containing 0.7% cholesterol and a kind of cereal among rice(R), brown rice(BR), barley(B), whole wheat(W), and wheat flour(F) for 5 weeks. The results were summarized as follow : 1) Food intake. weight gain and feed efficiency ratio were not significantly different among the groups. 2) Fecal wet weight and dry weight were significantly higher in W group which fed the most amount of IDF(insoluble dietary fiber). 3) The weight of large intestine was significantly heavier in the W group compared to the others. But the weights of liver, stomach and small intestine were not significantly different among the groups. 4) Total lipid. triglyceride(TG) and total cholesterol(TC) content in liver were significantly different among the groups. The values were the lowest in the B group whose intake of SDF(soluble dietary fiber) was the highest 5) TC content in serum was not significantly different among the groups. TG content in serum was significantly lower in the rest groups than in the R group. HDL-c and free-c content in serum were significantly higher in the B group than in the rest groups. HDL-c/LDL-c, free-c/ester-c ratio were the highest in the B group but not significant. Above results show that the dietary fiber contained in cereals has physiological effects and they are different depending on fractions, IDF and SDF.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.69-76
• /
• 2024

The rheological properties of fresh concrete significantly influence its manufacturing and performance. However, the diversification of newly developed mixtures and manufacturing techniques has made it challenging to accurately predict these properties using traditional empirical methods. This study introduces a multiscale rheological property prediction model designed to quantitatively anticipate the rheological characteristics from nano-scale interparticle interactions, such as those among cement particles, to micro-scale behaviors, such as those involving fine aggregates. The Yield Stress Model (YODEL), the Chateau-Ovarlez-Trung equation, and the Krieger-Dougherty equation were utilized to predict the yield stress for cement paste and mortar, as well as the plastic viscosity. Initially, predictions were made for the paste scale, using the water-cement ratio (W/C) of the cement paste. These predictions then served as a basis for further forecasting of the rheological properties at the mortar scale, incorporating the same W/C and adding the cement-sand volume ratio (C/S). Lastly, the practicality of the predictive model was assessed by comparing the forecasted outcomes to experimental results obtained from rotational rheometer.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2006

An experimental investigation of a Reversible Loop Heat Pipe (RLHP) was conducted to determine the operating limits and performance characteristics as functions of the thermophysical parameters, the heat input, and the cooling intensity. Variations in both temperature and heat transport capacity were measured and analyzed in order to accurately evaluate the transient operating characteristics. In addition, the maximum heat transport as a function of the mean evaporator temperature, the ratio of heat transport to heater input power as a function of the mean evaporator temperature, and the overall thermal resistance as a function of the overall heat transport capacity were examined as well. Results indicated that the cooling intensity played an important role on the operating characteristics and performance limitation. The maximum heat transports corresponding to cooling intensity $72W/^{\circ}C$ and $290W/^{\circ}C$ were 446 W and 924 W, respectively. Also, observation of the startup characteristics indicated that the mean evaporator temperature should be maintained between $40^{\circ}C$ and $60^{\circ}C$, and overall thermal resistance were measured as $0.02^{\circ}C/W$.

• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.287-293
• /
• 2019

The plastic strain ratio is one of the factors of the deep drawability of metal sheets. The plastic strain ratio of Al sheet is low value. Therefore, it is necessary to increase the plastic strain ratio in order to improve the deep drawability of the Al sheet. This study investigated the increase in the plastic strain ratio and the texture change of AA1050 Al sheet after the hot asymmetric rolling. The average plastic strain ratio of initial AA1050 Al sheets was 0.41. After 84% hot asymmetric rolling at $400^{\circ}C$, the average plastic strain ratio was 0.77. The average plastic strain ratio of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1.9 times higher than that of initial AA1050 Al sheet. The ${\mid}{\Delta}R{\mid}$ of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1/2 times lower than that of initial AA1050 Al sheet. This result is due to the development of the intensity of the ${\gamma}-fiber$ texture and the decrease of the intensity of {001}<100> texture after the hot asymmetric rolling of AA1050 Al sheet.

• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.281-286
• /
• 2019

The plastic strain ratio is one of the factors of the deep drawability of metal sheets. The plastic strain ratio of Al sheet is low value. Therefore, it is necessary to increase the plastic strain ratio in order to improve the deep draw ability of the Al sheet. This study investigated the increase of the plastic strain ratio and the texture change of AA3003 sheet after the hot asymmetric rolling. The average plastic strain ratio of the initial AA3003 sheets was 0.69. After 83% hot asymmetric rolling at $200^{\circ}C$, the average plastic strain ratio was 0.83. The average plastic strain ratio of the 83% hot asymmetrically rolled AA3003 sheet at $200^{\circ}C$ is 1.2 times higher than that of the initial AA3003 sheet. The ${\mid}{\Delta}R{\mid}$ of 83% hot asymmetrically rolled AA3003 sheet at $200^{\circ}C$ is 0.83 times lower than that of the initial AA3003 sheet. This result is due to the development of the intensity of ${\gamma}-fiber$ texture and reduces the intensity of {001}<110> and {001}<100> textures after hot asymmetric rolling of AA3003 sheet.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.189-193
• /
• 2001

We have characterized physical and electrical properties of W-TiN stacked gate electrode structure with TiN as a diffusion barrier of fluorine. As the $N_2/Ar$ gas ratio increased during sputter deposition, TiN thin films became N-rich, and the resistivity of the films increased. However, the resistivity of W-TiN stacked gate reduced as a result of the crystallization of tungsten with the increase of $N_2/Ar$ gas ratio. On the other hand, tungsten in W-TiN stacked gate structure have the (100)-oriented crystalline structure although TiN films were subjected to annealing at high temperature (600~$800^{\circ}C$). Leakage currents of W-TiN gate MOS capacitors were less than $10^{-7}\textrm{/Acm}^2$ and also were lowered by the order of 2 compared with those of pure W gate electrode.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.89-98
• /
• 1988

This research evaluated factors on cement-based solidification process designed for hazardous sludge produced from electroplating industry. Four factors of sand/cement ratio, water/cement ratio, amount of wet sludge and amount of a precipitator, were investigated in terms of leachability and compressive strength of the solidified materials. Results of triplicate tests and statistical analysis indicated that sand/cement ratio(S/C) had the greatest effect on leaching of Cr(VI) from the solidified materials while water/cement ratio(W/C) on Zn and compressive strength. Cr(VI) was fixed better than Zn by portland cement. An experimental modeing was developed to estimate leached metal concentration and compressive strength at a given condition. Proper mixing criteria were also suggested for the use of the solidified mixture as construction materials. In solidification of 30g dry sludge, optimal condition was studied for S/C ratio, W/C ratio and the weight of precipitator which were 1, 1.5 and 1.075g respectively.

• Culinary science and hospitality research
• /
• v.23 no.8
• /
• pp.163-172
• /
• 2017

In order to investigate the quality characteristics of Prunus persica Batsch var. davidiana Max. preserved in sugar, the quality characteristics were examined by dividing them into four groups: PS-A (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 100:0, w/w), PS-B (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 60:40, w/w), PS-C (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 40:60, w/w) and PS-D (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 0:100, w/w). The results were as follows: pH levels and soluble solid contents of PS-D sample were lower than those of the others, however total acidity value were higher. In case of Hunter's value, the 'L', 'a' and 'b' values of all samples were affected by addition of oligosaccharides. No great difference occurred among samples in reducing sugar contents. Organic acid content was significantly decreased with the lower addition of sucrose. The predominating organic acid components analyzed in all samples were lactic acid 156.15 g/100 g, tartaric acid 72.75 g/100 g and citric acid 32.90 g/100 g. The highest contents of total phenol and flavonoid, and DPPH and ABTS radical scavenging activity were $10.79{\pm}0.55mg\;GAE/mL$, $8.71{\pm}0.06mg\;CE/mL$ and 71.8%, 71.0% for PS-D, respectively. The results of this study indicated the use of oligosaccharides could increase the quality and antioxidant potentials of P. persica preserved in sugar.

• Journal of Powder Materials
• /
• v.25 no.5
• /
• pp.408-414
• /
• 2018

This study investigates the microstructure and wear properties of cermet (ceramic + metal) coating materials manufactured using high velocity oxygen fuel (HVOF) process. Three types of HVOF coating layers are formed by depositing WC-12Co, WC-20Cr-7Ni, and Cr3C2-20NiCr (wt.%) powders on S45C steel substrate. The porosities of the coating layers are $1{\pm}0.5%$ for all three specimens. Microstructural analysis confirms the formation of second carbide phases of $W_2C$, $Co_6W_6C$, and $Cr_7C_3$ owing to decarburizing of WC phases on WC-based coating layers. In the case of WC-12Co coating, which has a high ratio of $W_2C$ phase with high brittleness, the interface property between the carbide and the metal binder slightly decreases. In the $Cr_3C_2-20CrNi$ coating layer, decarburizing almost does not occur, but fine cavities exist between the splats. The wear loss occurs in the descending order of $Cr_3C_2-20NiCr$, WC-12Co, and WC-20Cr-7Ni, where WC-20Cr-7Ni achieves the highest wear resistance property. It can be inferred that the ratio of the carbide and the binding properties between carbide-binder and binder-binder in a cermet coating material manufactured with HVOF as the primary factors determine the wear properties of the cermet coating material.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.321-327
• /
• 2000

Tungsten(W) thin films with good adhesion property and low resistivity (~10 $\mu$\Omega$$.cm) were deposited directly on $SiO_2$ by LPCVD. The adhesion property of W thin films on $SiO_2$ improves as the temperature and/or $SiH_4/WF_6$ gas ratio increase. Specifically tungsten thin films could be deposited on $SiO_2$ even at $350^{\circ}C$ if the gas ratio of 2 was employed. The resistivity of tungsten thin films deposited at $350^{\circ}C$ was high due to the presence of $\beta$-W. However, the resistivity can be minimized by increasing the amount of $H_2$ gas flow. Therefore, it is shown in this work that the adhesion of tungsten thin films on $SiO_2$ can be improved simply by controlling the process parameters (e.g., temperature, gas ratio and $H_2$ flow rate) without employing complex deposition methods or additional glue layers.