• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.302-308
• /
• 1998

The author examined the response of Yoroi-mebaru, Sebastes hubbsi [MATSUBARA] to the underwater attracting lamps (0.5 W, 0.8 W, 1 W) line in the experimental water tank (550 L x 58 W x 73 H cm). The attracting rate investigated in accordance with the intervals of lighting and putting out hour (1, 5 minutes) when each of the underwater attracting lamps was gradually switched off after they were switched on all at once. The results are a follows: 1. Distribution rates of fish in the illuminated area was 35.7 % in case of 1 minute interval, and 50.3 % in case of 5 minutes interval. 2. Mean distribution rate of fish at the illuminated section: \circled1 Distribution rates at interval of 1 minute were 9.8 % in 1 W, 6.5 % in 0.8 W and 5.1 % in 0.5 W, respectively. \circled2 Distribution rates at interval of 5 minutes were 15.6 % in 1 W, 8.5 % in 0.5 W and 6.1 % in 0.8 W, respectively. 3. Attracting rates of the last section showed a little increasing as illuminating time elapsed. A difference of attracting rates according to lighting source in 5 minutes interval were bigger than that in 1 minute interval. 4. Attracting rates of fish in only last section switched on: \circled1 Attracting rates at interval in case of 1 minute were 30.0 % in 0.8 W, 16.0 % in 1 W and 8.0 % in 0.5 W, respectively. \circled2 Attracting rates at interval in case of 5 minutes were 56.0 % in 1 W, 30.7 % in 0.5 W and 10.7 % in 0.8 W. respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.243-251
• /
• 1992

The author examined the response of File fish, Stephanolepis Cirrhifer (TEMMINCK et SCHLEGEL) to the surface attracting lamps(0.5W, 0.8W, 1W) line in the experimental water tank (550L$\times$58W$\times$73H cm). the attracting rate was investigated in accordance with the interval of lighting and putting out hour (1, 5 minute)when each of the attracting lamps was gradually switched off after they were switched on all at once. The results are as follows: 1. Total distribution rate of fish in the illuminated section was 96.9%(mean 19.4%) in case of 1 minute interval, and 98.4%(mean 19.7%) in case of 5 minutes interval. 2. Mean distribution rate of fish at the illuminated section: \circled1 Distribution rate at interval of 1 minute were 19.9% in 0.8W, 19.3% in 1W and 18.9% in 0.5W respectively. \circled2 Distribution rate at interval of 5 minutes were 19.8% in 1W, 19.8% in 0.8W, and 19.5% in 0.5W respectively. 3. Attracting rate of the last section showed increasing as illuminating time elapse without interval and lighting source. 4. Attracting rate of fish in only last section switched on: \circled1 Attracting rate at interval in case of 1 minute were 98.0% in 1W, 97.0% in 0.5W and 83.0% in 0.8W respectively. \circled2 Attracting rate at interval in case of 5 minutes were 99.3% in 1W, 97.3% in 0.5W and 93.3% in 0.8W respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.369-372
• /
• 2008

This study analysis fundamental properties of high-strength concrete corresponding to W/B ratio for suggested table of high strength concrete, mixed with premixed cement. As a result of this study, the amount of using air entraining and high-range water reducing agent for intended slump flow and air content decreased as W/B increased, and the setting time corresponding to the W/B ratio delayed as W/B ratio increased except 20% W/B ratio. The compressive strength according to W/B ratio decreased as W/B ratio increased, and there was no great deferent as the intended slump flow. Also it could possible to use this study at work as the correlation coefficient is high enough as 0.9646 substituting B/W and compressive strength for the regression formula.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.32-35
• /
• 2008

Thermally stable diffusion barrier of tungsten carbon nitride(W-C-N) and of tungsten boron carbon nitride(W-B-C-N) thin films have studied to investigate the impurity behaviors of boron and nitrogen. In this paper we newly deposited tungsten boron carbon nitride(W-B-C-N) thin film for various $W_2B$ target power on silicon substrate. The impurities of the 100nm-thick W-C-N and W-B-C-N thin films provide stuffing effect for preventing the inter-diffusion between W-C-N or W-B-C-N thin films and silicon during the high temperature($700^{\circ}C{\sim}1000^{\circ}C$) annealing process.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.4
• /
• pp.293-297
• /
• 2020

This paper tried to find the best conditions that could be applied to solar cells by deposition of CdS thin film on ITO glass using multiplex displacement sputter system. RF power was changed to 50W, 100W, and 150W and sputtering time was set to 10 minutes. As a result of the measurement of transmittance, the average transmittance in the area of 400 to 800 nm was measured from 60% to 80% and the best characteristic was measured at 150W at 84%. The band gap was also measured at 3.762eV at 50W, 4.037eV at 100W and 4.052eV at 150W. In XRD analysis, even as RF power was increased, it was observed as a structure called Wurtzite (hexagonal) of CdS. And as RF power increased, the particles were large and uniformly deposited, but at 100W the particles were densely composed and dense. And the thickness measurement showed that the RF power increased uniformly.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.233-236
• /
• 2000

The structural, electrical and chemical characteristics of Al alloy thin film with low impurity concentrations AlW deposited by using dc magnetron sputtering deposition are investigated for the applications as data bus line in the TFT-LCD panel. The deposited thin films show the decrease of resistivity and the increase of grain size after the RTA at $300^{\circ}C$ for 20 min.. Moreover, the resistivity of AlW does not show appreciable grain size dependence after RTA. It is concluded that the decrease of resistivity after RTA is due to the increase of grain size. The annealed AlW is found to be hillock free. And for investigating chemical attack in TFT-LCD etching processing the electric potential of AlW alloy for Ag/AgCl were investigated by cyclic voltammetry. When W wt.% of AlW alloy was higher than about 3%, the electric potential of AlW was more positive than ITO's. Therefore AlW alloy thin film can be propose to use for data bus line.

• Honam Mathematical Journal
• /
• v.29 no.4
• /
• pp.631-640
• /
• 2007

In this paper, we introduce the notions of intuitionistic fuzzy w-primary submodule and intuitionistic fuzzy w-primary ideal. And we give an example of intuitionistic fuzzy w-primary submodule and some related properties are investigated.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.4
• /
• pp.141-150
• /
• 2006

Nanocrystalline CoW thin/thick film alloys were electodeposited from citrate baths to investigate the influences of metal ion concentration, current density and solution pH on chemical composition, current efficiency, residual stress, surface morphology, and microstructure of the film. Deposit W (tungsten) content in CoW thin/thick film increased with increasing W ion concentration, current density, and solution pH in the plating bath. It was observed that residual stress in CoW thin/thick film decreased with increasing W ion concentration and solution pH. CoW thin film exhibited mixed phases of hop Co [(100) and (002)] and hcp $Co_3W$ [(002) and (201)] at W ion concentration with 0.02 to 0.08 M. The microstructure of CoW thin film at W ion concentration of 0.1 to 0.2 M was close to amorphous phase. The dominant phases were found to be hop Co (002) and hop $Co_3W$ [(200), (002) and (201)] at the current densities of 5, 10, 25, and $100mA{\cdot}cm^{-2}$ CoW thin film at the current densities of 50 and $75mA{\cdot}cm^{-2}$ was close to amorphous phase. At solution pH 8.7, CoW thin film exhibited hcp Co (002) and hop $Co_3W$ [(200), (002) and (201)]. Below solution pH 8.7, CoW thin film exhibited amorphous microstructure. The optimum electrodeposition conditions for CoW thin/thick film were found to be W ion concentration of 0.08 M, current density of $10mA{\cdot}cm^{-2}$, and solution pH 8.7.

• The Korean Journal of Pesticide Science
• /
• v.4 no.3
• /
• pp.68-74
• /
• 2000

Penicillium oxalicum (PENOX) has shown the potential as a biocontrol agent(5CA) for control of a weed, clover(Trifolium repens L.) in grass plots. The bioherbicidal activity may be due to germinative and growth capacities and substrate availability of the agent over a range of environmental factors. The influences of different water activities($0.94{\sim}0.995\;a_w$) and temperatures($18{\sim}30^{\circ}C$) on mycelial growth, conidial germination, sporulation oil 2% MEA(malt extract agar) adjusted to different water activities with glycerol, and carbon source utilization using BIOLOG GN MicroPlate were determined in vitro. Decreases in $a_w$ on MEA caused a reduction in mycelial growth and conidial germination depending on temperature. The mycelial growth of PENOX was greatest at $30^{\circ}C/0.995\;a_w$. At some lowered water activity($0.97\;a_w$), the growth was similar between 25 and $30^{\circ}C$, and considerably decreased at lowered temperature($20^{\circ}C$). The germination rate was also greatest at $30^{\circ}C/0.995\;a_w$. Lag phase times for PENOX at $18^{\circ}C$ on MEA were >6hrs at tile whole $a_w$ level tested, and at 18 and $25^{\circ}C$ they were >18hrs and >12hrs at $0.94\;a_w$, respectively. However, its sporulation was some better at $0.97\;a_w$ than $0.995\;a_w$ or $0.94\;a_w$, and better at $20^{\circ}C$ than $30^{\circ}C$. In contrast, the number of carbon sources(niche size) utilized by PENOX varied with $a_w$ and temperature. Under some water stress condition($0.95\;a_w$), the agent utilized smaller number of carbon sources than $0.995\;a_w$ depending on temperature. The niche size at 0.995 and $0.95\;a_w$ were highest at $25^{\circ}C$, and showed 86 and 65, respectively. At $30^{\circ}C$, the niche size at 0.995 and $0.95\;a_w$ showed 84 and 50, respectively. There was no carbon source utilized by PENOX at $0.90\;a_w$ regardless of temperature. These information of tile fungal ecophysiology will be useful for the effective development of BCA.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.4
• /
• pp.37-50
• /
• 2007

Dramatic development of information technology requires new type of sales strategy to enterprise S/W dealers. That is, one should thoroughly consider diversified types of enterprise S/W and more elaborated consumer needs to establish successful sales strategy. However, various factors that should be considered in establishing enterprise S/W sales strategy are different according to types of enterprise S/W and hard to be managed systematically which led to the current situation where they have not been discussed enough. Therefore, this study introduced the relationship between the factors that affect selection of enterprise S/W using the concept of cognitive map on various enterprise S/W sales cases. Through this process, this study grouped the cognitive maps of similar cases to introduce their characteristics and made this result to be practically useful to enterprise S/W sales strategy.