• Investigative Magnetic Resonance Imaging
• /
• 제12권1호
• /
• pp.27-32
• /
• 2008

목적: 점구분-분광술을 이용한 여기법과 나선형 판독경사를 이용하여 삼차원 화학적변위영상을 개발하고자 하였다. 대상 및 방법: 상수 밀도를 갖는 나선형 판독경사를 디자인하는 분석식을 이용하여 스캐너에서 실시간으로 각종 지표들을 바꿀수 있도록 개발하였다 ($32{\times}32$ 행렬, $24{\times}24\;cm$ FOV). 생체내 뇌 데이터를 수집하였고 그리딩 알고리즘을 이용하여 분광학 영상을 재구성하였다. 결과: 본 연구에서 개발한 영상 기법을 이용하면, 점구분 분광술의 이점인 뇌 표면의 지방의 신호를 제거하면서 나선형 패턴이 갖는 장점들을 이용할 수 있다. 나선형 샘플링은 영상을 얻는데 걸리는 시간과 영상의 해상도를 자유로이 조절할 수 있는 유연성을 가지고 있다. 삼차원 고해상도 점구분-분광술 영상을 $5760\;cm^3$의 공간에서 얻는데 걸리는 총 시간이 12.5 분이었다. 결론: 점구분 분광술과 나선형 샘플링을 결합하여 삼차원 화학적 변위 영상을 얻는 새로운 방법을 개발하였다. 이를 통해 넓은 공간을 확보하며 동시에 지방 신호를 제거하는 기법을 사용할수 있게 되었다.

• 비파괴검사학회지
• /
• 제17권1호
• /
• pp.11-22
• /
• 1997

원자력발전소 압력용기 및 배관은 많은 용접부를 포함하고 있으며 용접부내 결함은 크기, 위치 및 형태에 따라 압력용기 및 배관의 건전성에 커다란 영향을 미친다. 따라서 주요 압력용기와 배관의 용접부에 대해서는 가동 전 중 검사시 초음파 탐상시험을 실시하여 그 건전성을 확인하고 있다. 초음파 결함 신호로부터의 결함 분류는 비파괴 평가에 있어 매우 중요하며 초음파 형상 인식 방법이 적당하다. 본 논문에서는 탄소강 압력용기 용접부에 내재하는 결함으로부터 얻어진 초음파 결함 신호의 형상 인식을 위한 절차로써 데이터 수집, 특징 추출, 특징 선택 및 결함 분류를 하였으며, 결함 분류에 있어 결함의 종류를 크게 선형(linear)과 체적(volumetric)의 두 종류로 분류함에 있어 퍼지이론을 적용하여 퍼지이론을 적용한 초음파 형상 인식 기법의 가능성 및 효율성을 제시하였고 그 결과 기존의 분류기(classifier)들에 비해 보다 우수한 결과를 얻을 수 있었다.

• 한국산업융합학회 논문집
• /
• 제4권3호
• /
• pp.243-251
• /
• 2001

The effects of various operating parameters(agitation speed, impeller type, antiform agents, impeller spacing etc.) on air-liquid mass transfer was characterized by volumetric mass transfer coefficient($k_La$). Also, the dual-impeller agitated systems are compared with single-impeller agitated systems with a special focus on its applications for bioreactors, $k_La$ was take over a range of 200~450 rpm of agitation speed, and 0.5~2.5 vvm of air flow rates, for four single impeller and impeller combinations consisting of four impeller types, namely rushton, pitched blade, scaba, intermig were tested. The rushton impeller showed the best $k_La$ as compared with other single impellers. The dual impeller system are found to be superior as compared to single impeller in all aspects, The best combination of the dual impeller was a intermig of axial flow type as an upper impeller and a rushton of radial flow type as a lower part. Also, the control of the DO level with the variation of agitation speed was more efficient than that with an increase in air flow rate. The addition of antiform dropped the $k_La$ very large up to 1g/L regardless the type. PPG was less effect on $k_La$ than other antiforms. The impeller spacing and presence of solute are found very effective on $k_La$. When the $NaNO_3$is presented as solute, the $k_La$ increased approximately 50% then control.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.668-671
• /
• 2001

For the saving of energy consumption, it is necessary that the high efficient energy transfer machine. We found the optimum operating condition of screw water chiller during this performance test. The specifications of compressor for this performance test are as follows. Built-in volume ratio; Vi=2.4, using refrigerant; HCFC-22, nominal motor output; 60kW(80Hp). We found the test results on water cooled chiller standard test condition that the evaporating capacity is increased 8% maximum and 5.6% under same operating condition. and COP is increased 11 % max. and 8% under same operating condition with change of the evaporating inlet/outlet condition. For the results of these test, we can estimate the optimum operating condition of water cooled type screw chiller.

• 한국유체기계학회 논문집
• /
• 제16권1호
• /
• pp.5-10
• /
• 2013

The performance of screw air compressor is affected by rotor profile, lobe number, air end wrap angle, rotor L/D ratio, suction and discharge ports, revolutions of air end and load regulation control, etc. In general, an efficient screw compressor needs a rotor profile of which has a large flow cross-section area, short sealing lines and a small blow-hole. In this study, experimental study was performed with newly designed $5{\times}6$ rotor profile and various shapes of air end. Results show that the measured specific power consumption of the newly designed screw compressor appeared to be lower than any other published data for the equivalent screw compressors manufactured.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.161-164
• /
• 2008

For the development of solar thermal power tower plant from the early 80' to today, various kinds of receiver have been tested and evaluated. Most of 1st generation receiver used water/steam as a working fluid to operate steam turbine and now the first commercial solar power tower PS-10 also makes saturated steam. However, to increase thermal efficiency of storage system and to obtain practical use of solar energy, molten salt system have been used from THEMIS project in France at 1984. The Solar Tres plant of 17 MWe power generation will be constructed in Spain and have plan to operate 24 hours in summer. The air volumetric receiver system can be integrated with combined cycle of gas turbine and HRSG and also with steam turbine easily. Therefore, related researches to develop higher efficient solar power tower plant and to operate with stable are widely performed in the world.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.923-928
• /
• 2002

Experimental and analytical study were conducted to develop the confined model of reinforced high strength concrete tied columns subjected to monotonically increasing concentric axial compression. Twenty-one large-scale columns(260$\times$260$\times$1200mm) used high strength concrete of 50 and 85MPa were fabricated to simulate an actual structural members size. Test results indicated that gains of strength and ductility of high strength concrete columns could be increased, if efficient arrangements and volumetric ratios of transverse reinforcements were provided. The proposed model satisfactorily predicted the experimental stress-strain curves for high strength concrete up to 100MPa.

• 한국환경과학회지
• /
• 제11권8호
• /
• pp.783-791
• /
• 2002

A laboratory-scale dual-column biofilter system was used to study the biofiltration of dimethyl disulfide(DMDS). The biofiltration of DMDS was found to depend on the pollutant loadings rather than the inlet concentrations. It was estimated that the pollutant was only inhibitory to the operation of the biofilters at DMDS concentrations greater than 5500 ppmv A residence time of 30 seconds(120 m$^3$/m$^2$/h volumetric loading) was determined as appropriate for efficient operation(>90%). The maximum elimination capacity for both compost mixtures under the current experimental conditions was found to range from 7.5 to 10 g-DMDS/m$^3$/h. A lower DMDS maximum elimination capacity was exhibited under acidified conditions.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.191-194
• /
• 2011

Low-grade waste heat has generally been discarded in industry due to lack of efficient recovery methods. In recent years, organic Rankine cycle(ORC) has become a field of intense research and appears as a promising technology for conversion of heat into useful work of electricity. In this work thermodynamic performance of ORC with superheating of vapor is comparatively assessed for various working fluids. Special attention is paid to the effects of system parameters such as the evaporating temperature on the characteristics of the system such as maximum possible work extraction from the given source, volumetric flow rate per 1 kW of net work and quality of the working fluid at turbine exit as well as thermal efficiency.

• 동의생리병리학회지
• /
• 제21권6호
• /
• pp.1624-1630
• /
• 2007

This study was designed to investigate the clinical effect of Kamkil-tang on the dyspnea. In this study, we measured the variations of the breathing volume of 20 patients after taking Kamkil-tang. Picrometer is used for the measurement of the volume. The investigation had been performed since from January 1st to August 31th of 2005. The patients for the experiment were mainly composed of patients who had trouble in breathing due to the pneumonectasis, asthmas, pneumonias. The percent of men is 65% in sex distribution and the ratio of persons over 50's was 90%. The results are as follows: After Kamkil-tang was taken to the patients, the enhancement ratio of breathing volume was appeared as 6.6%. The analysis based on an age was that the patients of 50's show the highest volumetric advancement. The ratio of breathing volume was higher as the patients were younger. From this, Kamkil-tang has more efficient on the younger patients. From the relations between the breathing volume before treatment and the enhancement ratio, the increase of the enhancement ratio and the better response to the medicine were shown to the more serious patients. The period of treatment was 22.4 days average. The enhancement ratio of smoker was 25.5, and that of non-smoker was 31.1. At the test of relation between the trouble rate in breathing and the enhancement ratio, Grade I shows the highest enhancement. From the experimental results, It is found that Kamkil-tang gives a noticeable benefit for the patients whose main symptom was breathing problem. Long-term treatments for the serious and younger patients will make much more efficient to the reduction of the symptoms.