• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.86-92
• /
• 2005

In this paper a forward-backward can extrusion process are analyzed by using rigid-plastic FEM simulation. FEM simulation is conducted to investigate forming characteristics such as deformation modes fur different process parameters. Design parameters such as thickness ratio, punch angle, friction factor and diameter ratio are selected to study the effect of them on the pattern of material flow. The analysis is focused mainly on the influences of the design factors on deformation pattern in terms of forming load, extruded length ratio and volume ratio. It is known for the simulation that the forming load, the length ratio and the volume ratio increase as the thickness ratio (TR), the wall thickness in forward direction to that in backward direction, decreases. The various punch angles have slight influence on the forming load. length ratio and volume ratio. However friction factor have little effect on the forming characteristics such as the forming load, volume ratio and so on. In addition the forming load increases as diameter ratio (DR), the outer diameter of a can in forward direction to that in backward direction, increases. Furthermore the extruded length ratio is lowest with a certain value of DR=0.85 among diameter ratios. Pressure distribution exerted on the die-material interface is illustrated schematically.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1267-1273
• /
• 2004

The temperature and soot particle measurement technique in a laminar diffusion flame have been studied to investigate the characteristics of soot particle with temperature using a co-flow burner. The temperature distributions in the flame were measured by rapid insertion of a R-type thermocouple and the soot particles were detected were detected by LEM/LIS techniques. In these measurement, soot volume fraction, number density and soot diameters were analyzed experimentally. As a results, the spacial distributions of particle volume fraction, soot diameter, and number density are mapped throughout the flame using the Rayleigh theory for the scattering of light by absorbing particles. A laser extinction method was used to measure the soot volume fraction and Laser induced scattering method was used to measure the soot particle diameter and number density. Also, we measured temperature without the effect of soot particles attached to the thermocouple junction, which is close to the nozzle. In this result, we found that upstream zone has a unstable flowing in co-flow diffusion flame and the y-axis temperature of flame has a uniform temperature distribution in the most soot volume fraction zone.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4268-4290
• /
• 2015

Future mobile communications face enormous challenges as traditional voice services are replaced with increasing mobile multimedia and data services. To address the vast data traffic volume and the requirement of user Quality of Experience (QoE) in the next generation mobile networks, it is imperative to develop efficient content distribution technique, aiming at significantly reducing redundant data transmissions and improving content delivery performance. On the other hand, in recent years cloud computing as a promising new content-centric paradigm is exploited to fulfil the multimedia requirements by provisioning data and computing resources on demand. In this paper, we propose a cooperative caching framework which implements State based Content Distribution (SCD) algorithm for future mobile networks. In our proposed framework, cloud service providers deploy a plurality of cloudlets in the network forming a Distributed Cloud Service Network (DCSN), and pre-allocate content services in local cloudlets to avoid redundant content transmissions. We use content popularity and content state which is determined by content requests, editorial updates and new arrivals to formulate a content distribution optimization model. Data contents are deployed in local cloudlets according to the optimal solution to achieve the lowest average content delivery latency. We use simulation experiments to validate the effectiveness of our proposed framework. Numerical results show that the proposed framework can significantly improve content cache hit rate, reduce content delivery latency and outbound traffic volume in comparison with known existing caching strategies.

• 대한토목학회논문집
• /
• 제39권6호
• /
• pp.869-875
• /
• 2019

회전교차로의 서비스수준은 관측값을 통해 얻은 기하구조 특성과 파라메터 값을 이용한 분석적 모형을 통해 산정하고 있다. 분석적 모형을 통해 회전교차로 관련 연구가 많이 진행되고 있지만, 변수조합 경우의 수가 방대하여 시뮬레이션을 통한 사례연구 또는 한정적인 특성에 따른 적정 교통량의 범위와 서비스수준을 제시하고 있다. 따라서 본 연구에서는 변수조절이 보다 다양하고 용이하도록 Visual Basic Application을 활용한 회전교차로 서비스수준 분석 모형을 구축하였다. 구축한 모형으로 다양한 상황에 따른 교통류 상태를 분석하고 회전교차로의 특성을 분석하였다. 분석 결과 좌회전, 유턴의 비율이 많아질수록, 접근로별 교통량 분포가 한쪽으로 치우칠수록 회전교차로의 한계 교통량이 감소해 혼잡이 빨리 나타나는 특성을 보였다. 특히, 교통량 분포가 균일하지 않을수록 한계 교통량의 감소가 회전비율의 영향을 덜 받는 것으로 분석되었다.

• 한국ITS학회 논문지
• /
• 제11권2호
• /
• pp.57-66
• /
• 2012

본 연구에서는 향후 국내 도입이 예상되는 버스 우선신호시스템의 도입시 발생하는 운영상 효과를 현장조사 자료를 기반으로 평가하여 제시하였다. 이를 위하여 시스템 도입 전후의 통행시간과 교통량을 측정하여, 차종별 개별 통행시간의 분포와 교통량, 그리고 통행시간의 변화를 분석하였다. 사전/사후 조사의 교통량 분석 결과, 승용차와 버스 모두 방향별로 약간의 교통량 변화가 나타났으나, 그 크기는 통행시간의 변화에 큰 영향을 미치지 않았다. 개별차량의 통행시간을 분석한 결과, 버스 우선신호제어 실시 후에 해당 구간의 승용차 및 버스의 통행시간 분포가 매우 개선되었다. 그리고 통행속도의 경우, 첨두와 비첨두 시간대 모두 주도로 방향의 버스 및 승용차의 통행속도가 증가하였다. 전체적으로 승용차 속도는 25.9 km/h에서 27.6 km/h로 약 6.5% 증가하였고, 버스는 19.2 km/h에서 21.3 km/h로 약 10.5% 속도가 증가하였다. 통계적 검증 결과 이러한 속도 변화는 95%신뢰수준에서 통계적으로 유의하였다. 본 연구결과는 향후 버스우선신호 관련 연구의 기초자료로 활용될 것으로 기대된다.

• Journal of Ecology and Environment
• /
• 제46권1호
• /
• pp.85-98
• /
• 2022

Background: Korean white pine (Pinus koraiensis) is a major commercial species, and the importance of the oak trees (Quercus spp.) is increasing due to various factors such as environmental and ecological values. However, more information is required to clearly understand the growth characteristics of these species especially regarding thinning intensity. This study was performed to provide the basic information to develop the silvicultural guideline and field manual by analyzing tree and stand characteristics in line with thinning intensity in the Korean white pine plantation and oak-dominated natural deciduous forest. Results: Diameter at breast height (DBH) and volume changes by the thinning intensity in the Korean white pine plantation were significantly different from those in the oak-dominated deciduous natural forest. In particular, DBH distribution in the pine stand appeared that there were more large diameter trees as the thinning intensity was higher. DBH periodic annual increment (PAI) of the pine stand was higher as the thinning intensity was stronger and the growth period was shorter. This trend was similarly shown in the natural deciduous forest, but the amount of PAI was smaller than in pine stand. The volume PAI after thinning was not decreased over time. In each stand type, the PAI tended to be lower as stand density was higher. The volume PAI in the pine stand was significantly higher than that in the oak-dominated natural deciduous forest. Dead trees occurred the most in the unthinned plots of each stand type, and those were higher in the natural deciduous forest. Ingrowth trees were observed only in the natural deciduous forest, and its distribution was the lowest in unthinned plots; Korean white pine as ingrowth occurred the most frequently among many tree species. Conclusions: Different effects of thinning treatment on DBH and volume PAI, mortality, and ingrowth were observed for each stand. With respect to forest growth, Korean white pine plantation was superior to the oak-dominated natural deciduous forest. The results of this study offer fundamental information for the development of silvicultural guidelines for Korean white pine plantations and oak-dominated natural deciduous forests in Korea.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.526-526
• /
• 2023

Water circulation plays a crucial role in regulating the salinity of estuaries, which is essential for the survival of estuarine organisms. Changes in freshwater inflows or sea level can have significant impacts on the distribution and abundance of species within these ecosystems. To better understand these dynamics, this paper presents a study of water circulation and salinity distribution in Seomjin River estuary using the Finite Volume Coastal Ocean Model (FVCOM) numerical model. An extreme scenario was simulated to assess the potential impact of tidal currents and river flow discharge on circulation and salinity distribution. The results of this study have important implications for managing estuarine ecosystems and conserving their associated biodiversity.

• Radiation Oncology Journal
• /
• 제11권2호
• /
• pp.431-437
• /
• 1993

방사선 수술에 있어서 선량 형태를 변형시키기 위한 조사변수들의 선택은 중요한 문제이다. 선형가속기를 이용한 뇌정위적 방사선 수술은 통상 원형 조사면과 다중 arc를 이용하여 구형 형태의 선량을 얻는 방법을 이용하고 있다. 그러나, 병소가 임의의 형태인 경우 구형의 선량으로서는 병소 이외에 정상조직도 많은 선량이 가해지게 된다. 현재 병소형태의 선량을 얻기 위한 방법으로 multiple isocenters를 이용하거나, 각 arc에 달리 weights를 주는 방법을 사용하고 있다. 본 논문에서는 병소의 beam's eye view를 이용하여 조사 위치에서 조사면을 shaping하는 새로운 방법에 대하여 논의하고자 한다. 이러한 conformal조사 방법은 병소와 정상조직의 가시적인 3차원 선량분포와 dose volume histogram의 분석 방법을 통하여 검증되었다. conformal 방법을 이용한 경우 multiple isocenter를 이용한 경우보다 적은 arc 수를 가지고도 상응하는 dose gradient와 더 나은 선량의 균질성을 얻을 수 있었다.

• 한국분무공학회지
• /
• 제20권3호
• /
• pp.175-180
• /
• 2015

A series of sprinkler discharging tests was conducted to measure the droplet size and its distribution of residential fire sprinkler heads. Droplet sizes in sprinkler spray were measured using a laser diffraction method for the flush, circular and pendent type sprinkler head. In this study, the $D_{v,50}$ of the flush type sprinkler heads were ranged between $530{\sim}1040{\mu}m$ and those of circular and pendent type were $988{\mu}m$ and $916{\mu}m$, respectively. The measured cumulative volume distributions were followed by a combination of the log-normal and Rosin-Rammler distribution which is widely used in the computational fire analysis and the parameters of distribution function were obtained from the best fit line through the measured data.

• 산업기술연구
• /
• 제20권B호
• /
• pp.63-70
• /
• 2000

One aims to find out how the operation condition of secondary inlet angle effects the temperature distribution inside a small incinerator. A finite volume commercial code, PHONICS, is used to simulate the temperature field in an incinerator. The computational grid system is constructed by Multi-Block technique. The governing equations based on the curvilinear coordinates are used. Numerical experiments are done with the five variations of secondary air inlet. The temperature distribution is quantified by the statistical deviation of temperature in an incinerator. The computational analysis says that the certain angle of secondary air inlet could improve the uniformity of temperature distribution in an incinerator.