• Journal of the Korean Society of Safety
• /
• v.11 no.3
• /
• pp.81-88
• /
• 1996

In order to investigate the electrical properties of transformer oils for large power, the characteristics of AC and Impulse breakdown in gap length of 1.0~2.5mm and that of volume resistivity were researched in temperature range of 20~$100^{\circ}C$. An geometrical capacitance of electrode with coaxial cylindrical shape for measuring the volume resistivity was 16pF, and highmegohm meter with model no. VMG-1000 was used, and also the applied voltage were DC 100, 250 and 500V. In the dependance of breakdown characteristics due to electrode gap length, it was confirmed that breakdown voltage was nearly uniform by volume effect according to the increase of gap. In the characteristics for AC breakdown, the dielectric strength was increased to $90^{\circ}C$ but decreased over $90^{\circ}C$, and also in case of impulse breakdown, it was increased to 7$0^{\circ}C$ and at dated $70^{\circ}C$ over in temperature range. The calculated mobility of oils in the characteristics for impulse breakdown were about $10^{-5}$~$10^{-4}cm^2/V{\cdot}S$, and the value of volume resistivity was almost invariable in low temperature range, regardless of voltage by the stable thermal properties, and it indicated a peak at $50^{\circ}C$ and had a sudden change to decrease over that temperature, and also the value of volume resistivity in 250V/mm at $80^{\circ}C$ is suitable for the International electrical standards, it was confirmed.

• Structural Engineering and Mechanics
• /
• v.59 no.1
• /
• pp.133-151
• /
• 2016

Self-Compacting Concrete (SCC) has been originally developed in Japan to offset a growing shortage of skilled labors, is a highly workable concrete, which is not needed to any vibration or impact during casting. The utilizing of fibers in SCC improves the mechanical properties and durability of hardened concrete such as impact strength, flexural strength, and vulnerability to cracking. The purpose of this investigation is to determine the effect of steel fibers on mechanical performance of traditionally reinforced Self-Competing Concrete beams. In this study, two mixes Mix 1% and Mix 2% containing 1% and 2% volume friction of superplasticizer are considered. For each type of mixture, four different volume percentages of 60/30 (length/diameter) fibers of 0.0%, 1.0%, 1.5% and 2% were used. The mechanical properties were determined through compressive and flexural tests. According to the experimental test results, an increase in the steel fibers volume fraction in Mix 1% and Mix 2% improves compressive strength slightly but decreases the workability and other rheological properties of SCC. On the other hand, results revealed that flexural strength, energy absorption capacity and toughness are increased by increasing the steel fiber volume fraction. The results clearly show that the use of fibers improves the post-cracking behavior. The average spacing of between cracks decrease by increasing the fiber volume fraction. Furthermore, fibers increase the tensile strength by bridging actions through the cracks. Therefore, steel fibers increase the ductility and energy absorption capacity of RC elements subjected to flexure.

• Journal of Distribution Science
• /
• v.21 no.3
• /
• pp.93-100
• /
• 2023

Purpose: The purpose of this paper is to confirm whether stocks belonging to the distribution industry in Korea have reversals, following large daily stock price changes accompanied by large trading volumes. Research design, data, and methodology: We examined whether there were reversals after the event date when large-scale stock price changes appeared for the entire sample of distribution-related companies listed on the Korea Composite Stock Price Index from January 2004 to July 2022. In addition, we reviewed whether the reversals differed depending on abnormal trading volume on the event date. Using multiple regression analysis, we tested whether high trading volume had a significant effect on the cumulative rate of return after the event date. Results: Reversals were confirmed after the stock price shock in the Korean distribution industry and the return after the event date varied depending on the size of the trading volume on the event day. In addition, even after considering both company-specific and event-specific factors, the trading volume on the event day was found to have significant explanatory power on the cumulative rate of return after the event date. Conclusions: Reversals identified in this paper can be used as a useful tool for establishing a trading strategy.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.5
• /
• pp.345-357
• /
• 2023

The present study conducted a stem analysis to trace growth information of Japanese larch (Larix kaempferi) and predict the future changes in growth volume. For this purpose, six L. kaempferi trees over 47 years old were cut at 1-2 m intervals from a height of 0.2 m, and circular plates of 5 cm thickness were collected for stem analysis. The analysis indicated that approximately 1-8 years are required to grow up to chest height. The annual height and diameter growth increased rapidly until the trees are 15 years old and gradually decreased after 20 years. The volume of 30-year-old trees in Oegam-ri forests, which were well-managed after artificial reforestation, was 0.4837 m³, whereas that in unmanaged Singi-ri forests was 0.1956 m³. Although the volume of individual trees differed greatly depending on the forest management status, it was found that the volume increased by 1.67-1.76, 2.49, and 3.49 times at 40, 50, and 60 years age, respectively, compared to the legal harvesting age 30. Therefore, factors such as the carbon dioxide reduction effect, forest management benefits, and the condition of trees at the site should be considered before harvesting trees.

• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.12.1-12.9
• /
• 2021

Objectives: The present study aims to compare the obturation quality of 2 confluence confirmation techniques in artificial maxillary first premolars showing Vertucci type II root canal configuration. Materials and Methods: Thirty artificial maxillary premolars having Vertucci type II root canal configuration were made. They were divided into 3 groups according to the confluence confirmation technique as follows. Gutta-percha indentation (GPI) group (confluence confirmation using a gutta-percha cone and a K file); electronic apex locator (EAL) group (confluence confirmation using K files and EAL); and no confluence detection (NCD) group. In the GPI group and the EAL group, shaping and obturation were performed with the modified working length (WL). In the NCD group, shaping was performed without WL adjustment and obturation was carried out with an adjusted master cone. Micro-computed tomography was used before preparation and after obturation to calculate the percentage of gutta-percha occupied volume (%GPv) and the volume increase in the apical 4 mm. Data were analyzed using 1-way analysis of variance and post hoc Tukey's test. Results: Statistically significant difference was not found in terms of the %GPv from the apex to apical 4 mm. However, the NCD group showed a statistically significant volume increase compared with the EAL group (p < 0.05). Conclusions: In terms of gutta-percha occupied volume, no significant difference was observed among the 3 groups. Confluence confirmation using an EAL in teeth with Vertucci type II configuration showed less volume increase during canal shaping compared with no confluence confirmation.

• Clean Technology
• /
• v.12 no.1
• /
• pp.45-51
• /
• 2006

Colloidal Liquid Aphrons(CLAs) were prepared from different solvents such as nonpolar hydrocarbons, alcohols, and amines. Water-soluble surfactant and oil-soluble surfactant were used in this study. The effect of PVR (phase volume ratio) and concentration of extractant on the stability of CLA was investigated. The stability of CLA was affected by PVR. As PVR was increased, the stability of CLA was decreased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.439-447
• /
• 1992

Eight healthy Holstein bulls, 4-6 years old were used to study the effect of season of the year on the biophysical characteristics of semen. Semen was collected twice a week by AV (artificial vagina) over one-year period. The analyses revealed that all the basic seminal traits studied were differed significantly due to season, except the ejaculate volume and consistency and the percentage of swollen spermatozoa in a hypo-osmotic fructose-citrate solution. Ejaculates collected during hot summer season had significantly lower sperm motility, concentration and total counts, and higher percentage of dead spermatozoa than those collected during winter time. Warm spring had moderate semen quality. The temperature-humidity index was calculated and it was associated (p < 0.01) negatively with the ejaculate pH, sperm concentration and total counts, and positively with the % of dead sperms. Ejaculate volume, percentage of swollen spermatozoa, individual motilities did not correlate significantly with the change in temperature-humidity index values. The total live, motile spermatozoa per ejaculate during both the winter and spring seasons showed significant increase of about 37% and 32% respectively over the summer season. Also, rectal temperatures of the bulls were elevated during the hot summer season, while the values of blood hemoglobin and packed-cell volume were decreased.

• Journal of Fashion Business
• /
• v.13 no.1
• /
• pp.91-101
• /
• 2009

The purpose of this study is to develop semantic differential scales which are necessary to evaluate visual image and effect of flare skirt. As a result of the first survey of 362 female college students, the most effective factors for shape of flare skirt are silhouette, volume of flare, and skirt length. Based on this result, we made flare skirt simulation for visual evaluation with using I-Designer program. 4 kinds of volume of flare($90^{\circ},\;180^{\circ},\;270^{\circ},\;360^{\circ}$) and 3 kinds of skirt length(48cm, 58cm, 68cm) are combined as variables for flare skirt of visual evaluation. For the second survey of 362 female college students, we asked to write suggested adjectives freely. As a result, we could draw out 210 adjectives. 'Feminine' was most frequently used word for flare skirt, and then, 'vivid', 'rhythmic', 'cute', 'soft', 'fat', and 'comfortable' in this order. With considering frequently used words in the preceding study, we selected 41 adjectives. Antonyms were selected from the resulted frequency of this study and preceding study, and the rest of words were found from dictionary. From these process, we developed semantic differential scales for visual image and effect of flare skirt.

• Transactions of Materials Processing
• /
• v.29 no.1
• /
• pp.37-43
• /
• 2020

Increasing the critical current density of superconducting wire is one of the difficult challenges in the field of superconductivity. It is well known that the higher volume fraction of uniformly dispersed α-Ti is able to enhance the critical current density of superconducting material NbTi because α-Ti serves as a flux pinning center. The volume fraction of α-Ti highly depends on the grain size of NbTi because α-Ti precipitates at the grain boundaries or triple points. For this purpose, we investigated the effect of initial microstructures of NbTi obtained from hot rolling in various temperature conditions on the critical current density. In addition, subsequent heat treatment was assigned to precipitate α-Ti and groove rolling/cold drawing was adopted to produce a wire with a diameter of about 1.0 mm. It was observed that the band structure was formed after hot rolling at 500~600℃. It was also found that the volume fraction of α-Ti after hot rolling at 500~600℃ was higher and it led to the highest critical current density.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.70-75
• /
• 2012

In this study, effect of nitrogen volume in the shielding gas of Ar-$N_2$ mixing gas on the bead shape, hardness and microstructure of GTA welds of 3mm thick Commercial Pure Ti was investigated. As the nitrogen volume increased, the welding current for full penetration was reduced and hardness in the fusion zone significantly increased compared with that of the base metal, but there is no difference in the hardness of HAZ. Microstructure in the fusion zone with pure Ar gas changed from equiaxed alpha of the base metal to serrated alpha. On the other hand, microstructure using Ar-$N_2$ mixing gas changed to acicular alpha. With the increasing of nitrogen content, the amount of acicular alpha increased and the size of that was fine.