• 동력기계공학회지
• /
• 제10권1호
• /
• pp.90-95
• /
• 2006

Pneumatic control systems have been mainly used as a high speed operating system. Therefore, state change of air in a control volume was assumed to be adiabatic change and, pneumatic control systems have been analyzed by using this assumption. Especially, when absolute value of pressure change in the control volume is small, there is a tendency to neglect effect of temperature change on pneumatic control system because temperature change owing to pressure change is small. In this study, an effect of temperature change of air on the decompression control process was analyzed by considering change of mass flow rate, and heat transfer characteristics between air in the chamber and the chamber wall. As a result, this study could confirm that a slight temperature change of the air in the pneumatic pressure control system can influence on the dynamic characteristics of pressure response, and pressure control performance.

• 한국농림기상학회지
• /
• 제16권4호
• /
• pp.327-335
• /
• 2014

현재 사용하고 있는 임목 재적표는 전국 공용으로 제작되어 있기 때문에, 특정 지역에 적용할 경우 재적을 과소 또는 과대 추정하는 문제점을 가지고 있다. 따라서, 본 연구는 이러한 문제점을 해결하기 위하여 수간곡선식을 이용하여 지역의 재적생장을 잘 반영할 수 있도록 홍천과 영주지역의 지방별 임목 수간재적표를 개발하고자 수행하였으며, 우리나라에서 가장 많은 분포를 보이고 있는 소나무를 대상으로 개발하였다. 추정에 적합한 수간곡선식의 도출을 위해서 Max & Burkhart, Korzak 그리고 Parresol et al.의 세 가지 수간곡선 모델을 적용하였으며, 적합도, 편의, 잔차의 표준 오차 등의 통계량을 분석하여 각 모델의 적합성을 평가하였다. 그 결과 3개의 수간곡선 모델간에는 정확성에 대한 유의적인 차이가 없으나, 소나무의 수간생장을 표현하는 데에는 Kozak 모델이 가장 적합한 것으로 나타났다. 따라서 Kozak 모형을 이용하여 소나무의 지방별 수간재적표를 조제하였다. 새롭게 개발된 지방별 수간재적표와 전국단위의 소나무 수간재적표와 비교한 결과, 홍천과 영주 2지역 모두에서 현재 재적표보다 재적이 높은 것으로 나타났으며(0.000< ${\alpha}=0.05$), 또한 두 지역간 지방별 재적표의 재적에서도 통계적으로 유의한 차이를 보였고(p-value: 0.000< ${\alpha}=0.05$) 홍천이 영주에 비해 재적이 높게 나타났다.

• 한국가구학회지
• /
• 제23권2호
• /
• pp.152-162
• /
• 2012

The color changing of the wood surface was tested by accelerated weathering test that can simulate the outdoor condition with short period. In early parts of accelerated weathering test, weight and volume of specimen all were increased due to the moisture evaporation by its high temperature and illumination level, but weight and volume of specimen all were decreased from middle parts to last. However, significancy showed between control group and accelerated weathering test group in terms of weight and volume. According to the results of color-difference meter, in the early parts of the accelerated weathering test lightness, redness and yellowness all showed a clear increasing or decreasing trend. However, after three weeks all values were almost never change. Until the early parts of the test, lightness was decreased and there was not a considerable change after three weeks in the test. Redness showed a some change in early parts of the test, but this also showed not great change after middle parts of the test as like lightness. Yellowness also showed same pattern. These results could be verified through the visual inspection. As like weight and volume, significancy showed between control group and accelerated weathering test group in terms of color-difference test. In all accelerated weathering test group, color-differences of after test was lower than that of before test. To correctly analyze this cause, more additional research will be need on each of temperature, humidity and illumination factors.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.439-444
• /
• 2005

Shotcrete lining is likely to be deteriorated due to the ground water which the lining is exposed to. Some tunnel collapses seemed to be affected by shotcrete degradation were reported. But there isn't any assessment method of shotcret long-term degradation. So, Experimental technology for shotcrete long-term degradation modeling was developed in this study. The shotcrete long-term degradation modeling, developed in other study in Korea Institute of Construction Technology, require the time-history of volume change. Digital strain observation system was used to acquire the time-history of volume change. To verify the Strain Observation Digital System, the measurement using the system was compared to the one using a micrometer. Through this process, The experiment for shotcrete long-term degradation modeling was set up.

• 한국환경복원기술학회지
• /
• 제13권2호
• /
• pp.1-7
• /
• 2010

The study objective was to compare the interior greening volume ratios for the change in concentration of fine particle, temperature and relative humidity, and to identify the level of interior landscape volume ratio as a suitable condition to achieve the desired indoor properties. Plants were moved into a room (88m3) randomly. After moving, the volume ratio of the interior greening level was set at 0%, 1%, 2% and 3%. The concentration of fine particles was measured with a mini-volume portable air sampler (Air Metrics, USA). The temperature and relative humidity were recorded with a digital sensor (Kiwi-LTH, USA) during the experiment under different volume ratios with three replications. 1. The results of the change in concentration of the fine particles revealed a trend towards an increased volume ratio of interior greening with decreasing concentration of fine particles, compared to non-plants (0%). The concentration of fine particles at volume ratios of 0%, 1%, 2% and 3% was 55ug/$m^3$, 233ug/$m^3$, 40ug/$m^3$ and 30ug/$m^3$, respectively. 2. The change in temperature, at volume ratios of 0%, 1%, 2% and 3% was $21.2^{\circ}C$, $17.4^{\circ}C$, $16.7^{\circ}C$ and $18.9^{\circ}C$, respectively, in near interior greening, and $22.1^{\circ}C$, $18.7^{\circ}C$, $18.4^{\circ}C$ and $20.5^{\circ}C$ respectively, at a distance of 3m from the interior greening. These study results suggested that temperature was affected by volume ratio and distance from the interior greening. 3. The relative humidity, at volume ratios of 0%, 1%, 2% and 3% was 34.2%, 32.5%, 36.7%, and 46.9%, respectively, in near interior greening, and 31.2%, 26.9%, 31.4% and 38.3%, respectively, at a distance of 3m from the interior greening. With increasing volume ratio of interior landscape, there were positive and significant results between the distance difference and the relative humidity more than temperature.

• 한국가축번식학회지
• /
• 제16권1호
• /
• pp.47-53
• /
• 1992

This study was carried out to investage the effect of cryoprotectant concentration and equilibration time on volume change and in vitro development of intact and bisected mouse embryos by rapid freezing. When compacted morulae were rapidly frozen in 3.0 to 4.0 glycerol or DMSO with 0.25M sucrose solution, the superior(P<0.05) post-thaw survival rate was obtained at the glycerol concentration of 4.0M(89.4%) than 3.0M(71.4%) or 5.0M(42.4%), but at the DMSO concentration of 3.0M(84.5%) than 4.0M(51.1%) or 5.0M(0.0%). The optimal equilibraton time for rapid freezing of ZP-free or bisected morulae in 4.0M glycerol with 0.25M sucrose was found tobe 3 minutes. The minimal volume of compacted morulaewhich corresponded with 61 to 62% of pre-equilibrated embryo volume was obtained from equilibration for 3 minutes in both 3.0 and 4.0M glycerol solutions with 0.25M sucrose.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1183-1189
• /
• 2004

An experimental investigation is conducted to measure phase change temperature and supercooling when acetone is added to TMA 30 wt% clathrate during cooling process in heat source. Also rate of volume change is investigated when acetone is added to TMA 30 wt% clathrate during the cooling process in heat source -8$^{\circ}C$. The results show that phase change temperature is about 4.5～5.5$^{\circ}C$ when acetone is added to TMA 30 wt% clathrate during the cooling process for heat sink temperature of -6, -7$^{\circ}C$ and -8$^{\circ}C$. Supercooling is repressed about 2～1$0^{\circ}C$ when 0.08 wt% acetone is added to it and rate of volume change is decreased about 2.9% when 0.1 wt% acetone is added for the heat sink temperature of -8$^{\circ}C$.

• Architectural research
• /
• 제26권1호
• /
• pp.13-20
• /
• 2024

This study is a research investigation into the properties of bubbles that affect the characteristics of foamed concrete during its production. The study examined the properties of bubbles based on the manufacturing conditions. To investigate these properties, the selected experimental factors included bead size, the length/diameter ratio of the bubble-generating tube, and compressed air. The experimental design used a design of experiments, and the test results were analyzed using analysis of variance. The foaming agent used to generate bubbles was AES (Alcohol Ethoxy Sulfate), and the method employed for bubble manufacture was the pre-foaming method. In the test results, a significant factor affecting the foaming rate of bubbles was the bead size; the highest foaming rate was observed when using 2mm beads. Bead size also primarily influenced the volume change of the aqueous solution, while other factors did not affect the foaming rate and volume change. None of the factors affected the change in bubble size, but compressed air was considered the main factor affecting bubble size and its change. The foaming rate and volume change of the aqueous solution showed a high correlation with each other. Spherical bubbles in the early stage eventually transformed into angular bubbles. Moreover, over time, it was observed that the bubble size increased.

• 한국방사선학회논문지
• /
• 제7권4호
• /
• pp.307-311
• /
• 2013

본 논문에서는 피폭선량 절감을 위해 기존의 선량보다 낮은 선량으로 CT검사를 했을 경우에 병변의 유무를 충분히 가릴 수 있는지 scan parameter(절편두께, Helical Pitch)와 3차원으로 영상재구성시 threshold값의 설정에 따른 영상의 변화정도를 3차원 영상화를 통하여 시료의 체적 변화를 알아보고, 피폭선량절감을 위한 CT에서 허용 가능한 scan parameter를 찾고자 연구를 시도하였다. 실험방법으로는 실리콘을 이용하여 시료를 제작하였으며, 이때 시료의 크기는 직경이 50, 40, 30, 20, 10mm로 10mm 간격으로 5개의 구형 모형을 제작하였고, 5개의 시료를 관전압, 관전류를 각각 120Kvp, 50mA로 고정하고, 단면두께(1.0, 2.0, 3.0, 5.0, 7.0mm), Helical Pitch(1.5, 2.0, 3.0)를 각각 변화시켜 Scan 하고 영상 간의 interval은 (1.0, 2.0, 3.0, 5.0, 7.0mm)로 구성하여, 영상을 workstation으로 전송하고, Volume Rendering Technique를 사용하여 threshold(-200,-50,50 ~1,000) 값을 변화시키면서 3차원 영상으로 재구성하고, 시료의 체적을 측정하였다. 실험결과 Helical pitch가 1.5일 때 체적변화가 가장 적었고, Helical pitch가 3.0일 때 체적변화가 가장 많이 감소하였으며, 절편두께가 증가할수록 시료의 체적도 실측치보다 감소한다는 것을 실험을 통해 확인 할 수 있었다. 또한 3차원 영상재구성시 threshold 범위를 -200~1,000으로 설정한 경우, 시료의 체적의 변화가 가장 적은 것으로 나타났다.

• 한국인쇄학회지
• /
• 제14권1호
• /
• pp.115-131
• /
• 1996

The PVT(pressure-volume-temperature) relation of main-chain dimer liquid crystals having structures such as $\alpha$,$\omega$-bis[(4,4`-cyanobiphenyl) oxy] alkane(CBA-n with=9, 10) were studied. these dimer liquid crystals are known to form an enantiotropic nematic mesophase. In this work, we have determined the volume change as a function of temperature and pressure by using a GNOMIX PVT apparatus. In the V-Tcurves obtaind from isobaris mearements on various pressures, volume changes were observed at the nematic-isotropiz and nematic-crystal phase transitions. The volume changes at the transition exhibit slight odd-even effect with respect to the number of methylene unit n. The values of the (S)v obtained at the NI transition for CBA-9 and -10 were 6.9 and 12.6J/mol k. The valuesof (S)v for the CN transition were estimated on the basis of DSC(differential scanning calorimetry) data: 58.8(CBA-9) and 65.3J/mol k (CBA-10). For both transition, it was found that the correction about the volume change is significant, ranging from 40% to 60% of the total transition entropy observed under constant pressure.