• Title/Summary/Keyword: Volume Production

Search Result 1,581, Processing Time 0.029 seconds

An Intravenous Replenishment of Salivary Components and Dry Forage Intake in Freely Drinking Large-type Goats

  • Sunagawa, K.;Hashimoto, T.;Izuno, M.;Hashizume, N.;Okano, M.;Nagamine, I.;Hirata, T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.21 no.4
    • /
    • pp.538-546
    • /
    • 2008
  • Large-type goats eating dry forage secreted large volumes of saliva which resulted in the loss of $NaHCO_3$ from the blood and decreased plasma volume (hypovolemia). This research investigated whether or not the loss of $NaHCO_3$ from the blood and hypovolemia brought about by dry forage feeding actually depresses feed intake in large-type goats under free drinking conditions. The present experiment consisted of three treatments (NI, ASI, MI). All treatments in this experiment were carried out under free drinking conditions. In the NI control (NI), a solution was not infused. In the ASI treatment, i.v. infusion of artificial saliva was initiated 2 h before feeding and was continued for a total of 3 h concluding 1 h after the commencement of the feeding perod. In the MI treatment, mannitol solution was infused to replenish only water lost from the blood in the form of saliva. The hematocrit and plasma total protein concentrations during feeding in the NI control were observed to be higher than pre-feeding levels. This indicated that dry forage feeding-induced hypovolemia was caused by the accelerated secretion of saliva during the initial stages of feeding in freely drinking large-type goats. Increases in hematocrit and plasma total protein concentrations due to dry forage feeding were significantly suppressed by the ASI treatment. While hematocrit during feeding in the MI treatment was significantly lower than the NI control, plasma total protein concentrations were not different. From these results, it is clear that the MI treatment was less effective than the ASI treatment in mitigating the decreases in plasma volume brought about by dry forage feeding. This indicates that plasma volume increased during dry forage feeding in the ASI treatment which inhibited production of angiotensin II in the blood. The ASI treatment lessened the levels of suppression on dry forage feeding, but the MI treatment had no effect on it under free drinking conditions. The results indicate that despite the free drinking conditions, increases in saliva secretion during the initial stages of dry forage feeding in large-type goats caused $NaHCO_3$ to be lost from the blood into the rumen which in turn caused a decrease in circulating plasma volume and resulted in activation of the renin-angiotensin system and thus feeding was suppressed.

Technology Innovation in Kimchi Packaging for Marketing in Food Supply Chain (상품적 유통을 고려한 김치 포장의 기술혁신 현황)

  • Lee, Dong Sun;Kwon, Ho Ryoung;An, Duck Soon;Chung, Michael;Lee, Kwang Sik;Yang, Dong Jin
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.18 no.1_2
    • /
    • pp.1-8
    • /
    • 2012
  • Kimchi, a Korean fermented vegetable is packaged without pasteurization and distributed with live bacteria actively working to produce lactic acid and carbon dioxide gas in the product. The $CO_2$ production consisting of two distinct phases of initial fast and later slow rates depends on kimchi type, salt content and storage temperature. The $CO_2$ produced from kimchi is accumulated in the product package causing volume expansion and pressure buildup. The dependence of $CO_2$ production rate on salt content and storage temperature has been published formerly and can be used for estimating the package volume and pressure under a variety of storage conditions. As methods to alleviate the problems from the produced $CO_2$, package designs with controlled diffusion pinhole, high $CO_2$ permeable film or $CO_2$ absorber have been tried by several researchers. Properly designed packages adopting the device or tool were shown to have high dissolved $CO_2$ in kimchi without volume expansion and pressure buildup, giving good sensory quality with carbonic taste. Advantages and limitations of each method have been discussed.

  • PDF

Dynamic Causality and Impulse Response between Maritime Import Volume, Relative Real Effective Exchange Rate, and Regional Industrial Activity : Focusing on a Trade Port of the Jeonnam Province (해상 수입물동량, 상대적 실질실효환율, 지역경기의 동태적 인과성과 충격반응 : 전남지역의 무역항을 중심으로)

  • Kim, Chang-Beom
    • Journal of Korea Port Economic Association
    • /
    • v.33 no.1
    • /
    • pp.47-59
    • /
    • 2017
  • The objective of this study is to determine the short run and long run dynamics between maritime import volume (IMV), industrial production (IP), and real effective exchange rate (REER) of the Korean Won over the REER of certain major currencies (US Dollar, Chinese Yuan, and Japanese Yen) in Korea's Jeonnam province. The Johansen and Juselius cointegration results reveal that at least one cointegration vector or long-run relationship exists. Hence, this study estimated the long run equilibrium equation, which indicates that both IP and REER are inelastic, although the former is bigger than the latter. Moreover, the dynamic causality analysis reveals short and long-run unidirectional causality from IP and REER to IMV in all three models. Further, in all the models, the results indicate short run unidirectional causality from REER to IP. In addition, the impulse response (IR) results show that the impulse of IP and REER decayed after four months. Additionally, the IR analysis results indicate that the REER of the Korean Won over the REER of Japanese Yen is the biggest with respect to the impact of relative REER on IP, which is the proxy variable of regional real income. Thus, empirical results indicated that real income and REER play an important role in determining the Jeonnam's maritime import demand behavior in the short run and long run. More importantly, substantial actions reducing unexpected fluctuation of the REER and real income based on micro and macro economic policies will increase the imported volume in the ports of the Jeonnam province.

Cultivation characteristics and yield of Sparassis crispa according to medium pH, medium moisture content, and inoculum volume of liquid spawn (배지 pH, 배지함수율 및 종균접종량에 따른 꽃송이버섯의 재배 특성 및 수량)

  • Heo, Byong-Soo;Choi, Kyu-Hwan;Jo, Yeong-Min;Kim, Hee-Jun
    • Journal of Mushroom
    • /
    • v.18 no.4
    • /
    • pp.303-310
    • /
    • 2020
  • The cultivation of Sparassis crispa in the beginning of the 2000s in South Korea, and the cultivar 'Neowul' bred in the Chonbuk Agricultural Research and Extension Service were registered first in 2016. However, there is no manual for the cultivation of Sparassis crispa, and therefore, there remains a big difference in its harvest rate across farms. Herein, we aimed to study the primordium formation conditions of Sparassis crispa 'Neowul' according to the medium pH, medium moisture content, and inoculum volume of liquid spawn and develop a stable production technology. We found the annual yield per bottle relating to the cultivation period, harvest rate, and the weight of fruiting body to be the highest at 363.6 g in the area cultivated at pH 3.8. However, it is thought that cultivation by adjusting the pH to 3.9±1 would be necessary for stable production, considering that at pH 3.6, the yield sharply reduced to 189.5 g. Moreover, the culture period was shorter at pH 4.0 compared with that at pH3.8, and the cultivation period at pH 4.0 was the same as that at pH 3.8. No significant difference in the weight of the fruiting body at different conditions was recognized. Additionally, it is difficult to regulate the pH precisely in practical applications in the farms. It is thought that 341.8 g Sparassis crispa will be produced per bottle annually if the medium moisture content is adjusted to 65%, liquid spawn inoculum volume is equivalent to 4% of the medium volume, and the humidity in the culture room is set to below 50%.

Establishment of Optimal Timber Harvesting Model by Using Goal Programming

  • Jang, Jae-Young;Choi, Sang-Hyun;Woo, Jong-Choon
    • Journal of Forest and Environmental Science
    • /
    • v.28 no.1
    • /
    • pp.30-36
    • /
    • 2012
  • The total yield of Pinus koraiensis stands was reviewed along forest function by using goal programming, which is one of the operations research techniques. The 4 kinds of management goals are set to identify timber production in the Research Forest of Kangwon National University. As a result, scenario 1 was estimated the best timber production over 2,073 ha area and also 588 ha in the third quarter was showed the most timber harvest. The rate of timber harvest was separated by 10 to 50 percent in non-timber forest function in the scenario 1 and that model was applied to the Research Forest of Kangwon National University. The structure of the area and volume is showed to be balanced quarterly when rate of timber harvest at 10 to 20 percent.

A Study on the Integrated Estimation of Delivery and Manufacturing Cost for Build-to-Order Manufacturing (주문형 생산에서의 납기 및 원가 예측 연동에 관한 연구)

  • 김인준;강무진
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.10a
    • /
    • pp.1456-1461
    • /
    • 2004
  • Companies of Build-to-Order(BTO) strive to achieve customer responsiveness and cost efficiency simultaneously. The success of BTO depends upon the high volume production based on product plat form and delayed differentiation principle on the one hand, and upon the rapid estimation of delivery and cost for the customer orders on the other hand. Expeditious processing of a specific order requires the rearrangement of production resources and the schedule, which results in increased cost. This paper describes a cost estimation method using activity-based costing depending on the schedule change caused by urgent customer orders.

  • PDF

Evolutionary Algorithm for Process Plan Selection with Multiple Objectives

  • MOON, Chiung;LEE, Younghae;GEN, Mitsuo
    • Industrial Engineering and Management Systems
    • /
    • v.3 no.2
    • /
    • pp.116-122
    • /
    • 2004
  • This paper presents a process plan selection model with multiple objectives. The process plans for all parts should be selected under multiple objective environment as follows: (1) minimizing the sum of machine processing and material handling time of all the parts considering realistic shop factors such as production volume, processing time, machine capacity, and capacity of transfer device. (2) balancing the load between machines. A multiple objective mathematical model is proposed and an evolutionary algorithm with the adaptive recombination strategy is developed to solve the model. To illustrate the efficiency of proposed approach, numerical examples are presented. The proposed approach is found to be effective in offering a set of satisfactory Pareto solutions within a satisfactory CPU time in a multiple objective environment.

Material Test and Forming Analysis of Urethane Rubber (우레탄 고무에 대한 물성평가 및 성형해석)

  • Woo, Chang-Su;Park, Hyun-Sung;Lee, Geun-An
    • Proceedings of the KSME Conference
    • /
    • 2007.05a
    • /
    • pp.279-284
    • /
    • 2007
  • Elasto-forming has been dedicated to specific and limited production. Today, using enhanced pad materials, it has become an efficient and economical process alternative for low and medium volume metal-forming production. The non-linear properties of elastomer which are described as strain energy function are important parameter to design and evaluate of elastomer component. These are determined by material tests which are uni-axial tension and bi-axial tension. In order to investigate the design paramerer, Finite element analysis was carried out for elasto-forming process.

  • PDF

Red Pigment Overproduction by Fed-Batch Culture of Monascus anka (Monascus anka로부터 유기배양에 의한 적색소의 대량생산)

  • 김희구;박근태;손홍주
    • The Korean Journal of Food And Nutrition
    • /
    • v.11 no.6
    • /
    • pp.617-621
    • /
    • 1998
  • The production of red pigment from glucose by fed-batch culture of Monascus anka was investigated. In batch culture using fermentor, 200 rpm of agitation speed, 1vvm of aeration volume, and 10% (v/v) of inoculum size were optimal, respectively. The red pigment production was increased by removal of wall-attached mycelium. In an intermittent feeding fed-batch culture, dry cell weight increased to 30 g/l, adn the red pigment content reached 350 of absorbance at 495nm. In a continuous feeding fed-batch culture, dry cell weight increased to 22g/l, and the red pigment content reached 190 of absorbance at 495nm.

  • PDF

A Study of Vision Algorithm Development for Growth Monitoring of Potato Microtubers (인공씨감자 생육상태 모니터링을 위한 화상처리 알고리즘 개발에 관한 연구)

  • Choi, J.W.;Chung, G.J.;Lim, S.J.;Choi, S.L.;Chung, H.;Nam, H.W.
    • Journal of Biosystems Engineering
    • /
    • v.23 no.4
    • /
    • pp.373-380
    • /
    • 1998
  • The contribution of this paper is to provide the methods for the production automation of potato microtuber using the vision process in growth monitoring. The first method deals with computation for the growth density in the primary growth process. The second method addresses cognition process to identify the number and the volume of potato microtuber in secondary growth process. The third is to decide whether potato microtubers are infected by a virus or bacteria in growth process. The computation for the growth density in the primary growth process uses the method of Labeling. The second and third methods use template matching based on color patterns. With the developed method using vision process, this experiment is capable of discriminating weekly growth-rate in primary growth process, 85% cognition rate in secondary process and identifying whether there are infections. Therefore, we conclude that our experimental results are capable of growth monitoring for mass production of potato microtubers.

  • PDF