• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2563-2566
• /
• 2007

TFT LCD industries have endeavored to adopt the piezo Drop-On-Demand (DOD) inkjet printing technology to production lines of TFT LCD color filters and these efforts have significantly been based on experimental works. Because the degree of complexity in the piezo DOD inkjet printing technology results in too many combination of parameters, the matrix experimental method to investigate all possible sets of parameters becomes ineffective and hence the basic understanding of the piezo Drop-On-Demand inkjet print technology becomes important. In this study, one possible cause of the droplet volume variation across nozzles, which might cause visible swathe marks on an inkjet patterned TFT LCD color filter, is theoretically investiaged and new R&D directions are suggested.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.217-218
• /
• 2002

An integrated adhesive wear model was proposed to determine the transient wear and steady-state wear of aluminium alloy matrix composites. The transient wear volume was described by an exponential equation, while the steady-state wear was governed by a revised Archard equation, in which both the transient wear volume and transient sliding distance were excluded. A mathematical method was developed to determine both the transient distance and the net steady-state wear coefficient. Experimental wear tests were carried out on three types of commercial A6061 aluminum alloy matrix composites reinforced with 10%, 15% and 20% alumina particles. More accurate wear coefficient values were obtained with the proposed model. The average standard wear coefficient, as determined by the original Archard equation, was found to be about 51% higher.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.130-135
• /
• 1998

This paper presents results of research performed to identify optimum mix proportions for production of flowable fill with high volume fly ash content. The fly ash used in this study met the requirements of KS L 5405 and ASTM C 618 for Class F material. Tests were carried out on concrete designed to have 10 ~ 15kg/$\textrm{cm}^2$ compressive strength at the 28-day age with fly ash contents of approximately 280kg/㎥. Slump was held at 25$\pm$1cm for all mixtures produced compressive strengths at 28 days were found to range from 5.03 to 13.69kg/$\textrm{cm}^2$.

• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.261-271
• /
• 2000

In this paper the leakage prediction and rotordynamic analysis of an annular seal with a smooth rotor and circumferentially grooved stator are performed based on a three-controlvolume theory. The present analysis is validated by comparing with the experimental data of Iwatsubo and Sheng and theoretical results suggested by Marquette and Childs. For the leakage prediction the present analysis shows a good agreement with Marquette and Childs' result and a qualitation agreement with Iwatsubo and Shengs' experimental data. Direct and cross-coupled stiffness coefficients show closer agreement with the experimental values than those of Marquette and Childs. However, direct damping coefficient shows greater discrepancy from the experimental value than Marquette and Childs'.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.3
• /
• pp.191-194
• /
• 1994

Acetoin and ammonia, the precursors of tetramethylpyrazine (TMP) having "nutty " or "roasted" flavors, were produced by cultivating Lactococcus lactis ssp. lactis biovar. diacetilactis FC1. The effects of the volume concentration ratio (VCR) of cell-free medium on the formation of TMP were investigated using a rotary evaporator at $70^{\circ}C than at 80^{\circ}C$. As the VCR increased, the formation of TMP and the conversion ratio of acetoin to TMP increased. More TMP were formed at $70^{\circ}C than at 80^{\circ}C$. As the VCR increased, the concentration of acetoin decreased implying the formation of TMP from acetoin and ammonia.

• Journal of the Korean Society of Safety
• /
• v.13 no.2
• /
• pp.109-115
• /
• 1998

Tri-cresyl phosphate(TCP) was synthesized by reaction of phosphorus chloride with mixed cresol(mixture of m-cresol, p-cresol, and others) in the presence of $AlCl_3$. Some of unwanted products and unreactants colored TCP. In order to separate TCP from these, vaccume distillation was carried twice, but colorless TCP could not be producted. Separation of unwanted materials by 2% NaOH solution was introduced before first and second distillation and optimal separation conditions such as NaOH concentration, mixing volume ratio, mixing time, and rpm were investigated for new batch separation and production of colorless TCP Optimal conditions were 2% NaOH solution, 35% mixing volume ratio of 2% NaOH solution, 1.5 hours of mixing time, and 20 rpm.

• Transactions of Materials Processing
• /
• v.15 no.9 s.90
• /
• pp.673-678
• /
• 2006

Demands for micro parts have increased with recent advances in IT and machinery industries. However, the present technology loaves much to be desired to effectively produce parts with the volume of $1mm^{3}$ and less by mechanical method in large quantities. This paper provides a method for efficient quantity production of complete micro 3D structure using micro end-milling cutting process. The possibility has proven via manufacturing experiment of a multistage micro complex gear structure of $500{\mu}m$ in length, $500{\mu}m$ in maximum external diameter and a volume of $1mm^{3}$ and less.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.59
• /
• pp.105-118
• /
• 2000

The rise in population and the increase of urbanization and industrial growth has resulted in an ever-increasing volume of municipal solid waste that must be regularly collected, transported, and ultimately disposed of. Therefore, over the last decade the public, commercial and legislative awareness of environmental issues has been increased dramatically on earth particularly some industrial countries which has a shortage of landfill capacity. A quality, cost and delivery lead-time are usually considered as the competitive factors for each industry. However, the concepts of environmental issue are emerging common terms and concerns more seriously. More attention than ever is being focused on the recycling and source reduction techniques to reduce the total volume of waste. Unfortunately, however, a shortage of landfill capacity and increasing disposal cost requests a fundamental solution about the environmental issue. That is the remanufacturing which allow manufacturers to minimize waste, production cost and to turn end-of-life product into a profitable product. The objectives of this research were to growth the remanufacturing system by suggesting issues and implementation methods for the remanufacturing. In order to accomplish these objectives, we introduced backgrounds of appearance and benefits of the remanufacturing.

• Transactions of Materials Processing
• /
• v.12 no.8
• /
• pp.693-701
• /
• 2003

In this paper, the influence of frictional conditions on the backward impact extrusion of aluminum battery casing with large aspect ratio has been investigated. In the simulation, MSC.Superforge, a package based on the finite volume method, is used for the extrusion analysis. The formability and earing problem during the production have been evaluated by studying the sensitivity to frictional effects. During the sensitivity analysis, the friction factor was varied from 0.02 to 0.24. As the friction factor is increased, the forming height of the narrow edge is decreased, and the forming height of the wide edge is increased. When the friction factor becomes 0.2, the earing problem does not occur The experimental results show a good agreement with analytical results.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.3
• /
• pp.279-290
• /
• 2004

Sludge quantity has increased at "A"water treatment plant due to deterioration of raw water quality and GAC installation. Increased sludge resulted in overloading on sludge handling facilities. The object of this study is to survey sludge quantity and capacity of sludge handling facilities at "A"water treatment plant. Measured quantity of sedimentation sludge considerably exceeded the design capacity of sludge holding basin. Sludge holding basin was properly designed, but low concentration of sludge discharged from sedimentation basin caused production of large volume of the sludge. Timer operated control system for sludge withdrawal unit and leakage through a control valve were suspected to cause the low concentration. Augmentation of the control system by a turbidity meter and addition of a new control valve successfully reduced the sludge volume enough to satisfy the design capacity of sludge holding basin. Unlike sedimentation sludge, measured quantity of washwater was considerably less than the design capacity of washwater basin because it was over-designed.