• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.77-85
• /
• 2002

The objective of this study was to evaluate the performances of the ASBR under critical conditions of solid-liquid separation, caused by extremely high solids concentration, for wider application of the ASBR to various wastes. The ASBRs and completely-mixed daily-fed control runs were operated using a municipal mixed sludge at 35$^{\circ}C$ and 55$^{\circ}C$. Conversion of completely-mixed daily-fed reactor to sequencing batch mode and changes in HRT of all ASBRs were easily achieved without adverse effect, regardless of digestion temperature. Solids accumulation was remarkable in the ASBRs, and directly affected by settleable solids concentration of the feed sludge. Noticeable difference in solids-liquid separation was that flotation thickening occurred in the mesophilic ASBRs, while gravity thickening was a predominant solid-liquid separation process in the thermophilic ASBRS. Solids profiles at the end of thickening step dramatically changed at solid-liquid interface, and slight difference in solids concentrations was observed within thickened sludge bed. Organics removals based on subnatant or supernatant after thickening always exceeded 80% in all reactors. Thickened sludge volume and gas production of the ASBRs affected mutually. Gas production increased as thickened sludge accumulated, and continuous gas evolution during thickening could cause thickened sludge to expand or resuspend. Thickened sludge volume exceeding a predetermined withdrawal level resulted in loss of organic solids as well as biomass during withdrawal step, leading to decrease in gas production ind SRT. Such an adverse mutual effect was significant in gravity thickening, while it was not sensitive in flotation thickening. Changes in organic loading had no significant effect on organic removals and gas production after build-up of solids in the ASBRs.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.2
• /
• pp.65-81
• /
• 2014

Objectives This study was carried out to find out the anti-osteoarthritic effects of Mahwangbujaseshin- tang (Mahuangfuzixixintang ) on the monosodium iodoacetate (MIA)-induced osteoarthritis rats. Methods Osteoarthritis was induced by injecting MIA ($50{\mu}l$) into the knee joint of rats. Rats were divided into a 3 groups (n=7). The injection did not fit the normal group. A week later, after the injection of MIA, while control group took normal saline 2 ml, the extract of Mahwangbujaseshin-tang (Mahuangfuzixixintang ) (MBST) (200 mg/kg) was injected to treated group. After that, we examined hind paw weight bearing ability, functions of liver and kidney, serum TNF-$\alpha$, IL-$1{\beta}$, IL-6, $PGE_2$, $LTB_4$, TIMP-1, MMP-9 and hematology. Volume of cartilage was measured by micro CT arthrography. Injury of synovial tissue was measured by H & E, Safranin-O immunofluorescence. Results 1) DPPH and ABTS free radical scavenging activity of MBST was increased according to concentration of MBST and total phenolic contents were in high level. 2) In RAW 264.7 cells, ROS production was significantly decreased in MBST (at 10, $100{\mu}g/ml$) and NO was also decreased but meaningless in MBST (at $100{\mu}g/ml$). 3) In RAW 264.7 cells, IL-6 production was significantly decreased in MBST (at $100{\mu}g/ml$) and TNF-$\alpha$ and IL-$1{\beta}$ production were also decreased but meaningless in MBST (at $100{\mu}g/ml$). 4) In hind legs weight-bearing measurement, level of weight-bearing was increased. 5) Functions of liver and kidney were not affected. 6) TNF-$\alpha$, IL-$1{\beta}$, IL-6, $PGE_2$, $LTB_4$, MMP-9 and TIMP-1 production were significantly decreased. 7) In hematology, the levels of neutrophils, monocytes were significantly decreased and the levels of white blood cells, lymphocytes were also decreased but meaningless. 8) In micro CT-arthrography, cartilage volume was significantly increased. 9) Histopathologically, injury on cartilage and synovial membrane of MBST group was decreased. Conclusions Based on all results mentioned above, Mahwangbujaseshin-tang (Mahuangfuzixixintang) is believed to be meaningful for suppressing the progress of osteoarthritis. And it is related to inhibiting the activity of inflammatory cytokine and injury of volume in cartilage.

• Journal of Environmental Impact Assessment
• /
• v.14 no.5
• /
• pp.347-353
• /
• 2005

The risk assessment is the qualitative or quantitative evaluation of the risk posed to human health and the environment by the actual or potential presence or release of hazardous substances, pollutants or contaminants. The environmental impact assessment (EIA) is assessed by the environmental criteria, and risk assessment is assessed by the risk rate. Risk rate based on dose-response values may not be easy to apply on regulatory basis like EIA for uncertainty. Internationally there is an example of OECD program. Risk assessment of High Production Volume (HPV) Chemicals has started since the OECD Program with the 1990 Council Act on the Co-operative Investigation and Risk Reduction of Existing Chemicals. These HPV chemicals include all chemicals produced or imported at levels greater than 1,000 tonnes per year in at least one Member country or in the European Union region. The SIDS called the Screening Information Data Set is regarded as the minimum information needed to assess an HPV chemical to determine whether any further work should be carried out or not. All the data elements of SIDS including assessment for environment and health are prepared as three formats of the full SIDS Dossier, the SIDS Initial Assessment Report (SIAR), and the SIDS Initial Assessment Profile (SIAP) of an HPV chemical. In 1998 the global chemical industry through the International Council of Chemical Associations (ICCA) has joined to work with OECD. The OECD has assessed approximately 1,000 chemicals from 1991 through 2004 with ICCA. Till the February of 2005, 592 chemicals of those chemicals completed SIDS reports. Member countries have been targeted the goal of 1,000 new chemicals from 2005 to 2010 and Korea shared 36 chemicals from the 1,000 new chemicals. Currently Korea has completed SIDS reports of 7 chemicals among sponsored 24 chemicals. In conclusion SIDS project will be linked to national program for outputs application with more reliable production. Both the OECD and industry will carry out their commitment to complete assessments for more and the remaining chemicals assessment. The major outputs will contribute to cope with international chemical management.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.359-363
• /
• 2013

Silicon carbide and its composites are being considered as a nuclear fuel cladding material for LWR nuclear reactors because they have a low neutron absorption cross section, low hydrogen production under accident conditions, and high strength at high temperatures. The SiC composite cladding tube considered in this study consists of three layers, monolith CVD SiC - $SiC_f$/SiC composite -monolith CVD SiC. The volume fraction of SiC fiber and surface roughness of the composite layer affect mechanical and corrosion properties of the cladding tube. In this study, various types of SiC fiber preforms with tubular shapes were fabricated by a filament winding method using two types of Tyranno SA3 grade SiC fibers with 800 filaments/yarn and 1600 filaments/yarn. After chemical vapor infiltration of the SiC matrix, the surface roughness and fiber volume fraction were measured. As filament counts were changed from 800 to 1600, the surface roughness increased but the fiber volume fraction decreased. The $SiC_f$/SiC composite with a bamboo-like winding pattern has a smaller surface roughness and a higher fiber volume fraction than that with a zigzag winding pattern.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.107-115
• /
• 1999

The effectiveness of resting cells of a photosynthetic bacterium, Rhodospirillum rubrum N-1, was investigated on the production of extracellular ${\delta}-aminolevulinic$ acid(ALA). The ALA generating system required 3hr-incubation in the presence of 10mg of resting cells per ml to obtain the maximal yield of extracellular ALA. and also, under this condition the effect of ALA inducers, i.e., 30mM levulinic acid (LA) and L-glutamic acid($C_5$ pathway precursor) was relatively higher than that of produced extracellular ALA($83{\mu}M$). The volume of system and proper cell density appeared to be important factors for the effective production of extracellular ALA.

• Advances in Energy Research
• /
• v.1 no.1
• /
• pp.53-78
• /
• 2013

Methane carbon dioxide reforming (MCDR) is a promising way of utilizing greenhouse gas for hydrogen-rich fuel production. Compared with other types of reactors, Compact Reformers (CRs) are efficient for fuel processing. In a CR, a thin solid plate is placed between two porous catalyst layers to enable efficient heat transfer between the two catalyst layers. In this study, the physical and chemical processes of MCDR in a CR are studied numerically with a 2D numerical model. The model considers the multi-component gas transport and heat transfer in the fuel channel and the porous catalyst layer, and the MCDR reaction kinetics in the catalyst layer. The finite volume method (FVM) is used for discretizing the governing equations. The SIMPLEC algorithm is used to couple the pressure and the velocity. Parametrical simulations are conducted to analyze in detail the effects of various operating/structural parameters on the fuel processing behavior.

• Korean Journal of Organic Agriculture
• /
• v.9 no.3
• /
• pp.23-44
• /
• 2001

To address complex solutions to tack1e the cost rise with the increasing of the prices of crude oil, and to lower warming gas discharge in agricultural sector in line with the framework Convention on Climate Change, we need to net only develop the methods of simply reducing energy use ratio, but also effectively energize resources discharged in the course of agricultural production aimed at enabling repealed farming, and develop systems to reinvest such energy into agricultural production and apply them to actual farming. To that end, specifically, we need to reduce the energy cost in agricultural production, and produce and harness bio gas that makes it possible to stabilize the continued supply of energy. Thus, in this research, we seek to discuss energy use volume and warming gas discharge, and the characteristics of bio gas and its use methods alike, in agricultural sector, and thus present methods for environment-friendly and continual development in agriculture.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.55
• /
• pp.51-71
• /
• 2000

A case of company manufacturing industrial valves is studied. To survive the fierce competition in the low-volume, high-complexity production environment, the company needs accurate information on the cost of its products. Current cost accounting system which allocates production costs based on the weights of intermediates and final products cannot provide accurate cost information that managers really need. Data on the company's cost structure and production processes were reviewed and managers were interviewed before problems with the current costing system were identified. Activity-based costing (ABC) system as well as an improved traditional costing system is considered to replace the current system. A prototype of ABC system is developed to better represent the relationships among the cost drivers, activities, and products.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1331-1332
• /
• 2006

The present investigation has attemped to optimize hydrogen reduction process for the mass production of Fe-8wt%Ni nanoalloy powder from ball milled $Fe_2O_3-NiO$ powder. In-situ hygrometry study was performed to monitor the reduction behavior in real time through measurement of water vapor outflowing rate. It was found that the reduction process can be optimized by taking into account the apparent influence of water vapor trap in the reactor on reduction kinetics which strongly depends on gas flow rate, reactor volume and reduction.

• IE interfaces
• /
• v.22 no.4
• /
• pp.302-311
• /
• 2009

It's very important to make an effective and optimized production schedule for the small-to-medium-sized factory which have high-variety low-volume manufacturing properties. And now people say that MES is very useful to make scheduling more effectively. But for small-to-medium-sized factory, it is very difficult to build MES system because of fewer infrastructures in the factory, and more to keep it's continuous maintenance and improvement. Therefore it is more important to systematize the production scheduling generation using simpler and easier tools like EXCEL sheet. And it will be needed a new method to make simple MES construction for more efficient production scheduling. This paper proposes the method which can build simple MES easily using a tool of EXCEL VBA for a small-to-medium-sized factory, and introduces an applied case by the proposed method and EXCEL VBA.