• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.15-24
• /
• 2021

Purpose SPECT/CT was noted for its excellent correction method and qualitative functions based on fusion images in the early stages of dissemination, and interest in and utilization of quantitative functions has been increasing with the recent introduction of companion diagnostic therapy(Theranostics). Unlike PET/CT, various conditions like the type of collimator and detector rotation are a challenging factor for image acquisition and reconstruction methods at absolute quantification of SPECT/CT. Therefore, in this study, We want to find out the effect on the radioactivity concentration estimate by the increase or decrease of the total acquisition time according to the number of projections and the acquisition time per projection among SPECT/CT imaging conditions. Materials and Methods After filling the 9,293 ml cylindrical phantom with sterile water and diluting 99mTc 91.76 MBq, the standard image was taken with a total acquisition time of 600 sec (10 sec/frame × 120 frames, matrix size 128 × 128) and also volume sensitivity and the calibration factor was verified. Based on the standard image, the comparative images were obtained by increasing or decreasing the total acquisition time. namely 60 (-90%), 150 (-75%), 300 (-50%), 450 (-25%), 900 (+50%), and 1200 (+100%) sec. For each image detail, the acquisition time(sec/frame) per projection was set to 1.0, 2.5, 5.0, 7.5, 15.0 and 20.0 sec (fixed number of projections: 120 frame) and the number of projection images was set to 12, 30, 60, 90, 180 and 240 frames(fixed time per projection:10 sec). Based on the coefficients measured through the volume of interest in each acquired image, the percentage of variation about the contrast to noise ratio (CNR) was determined as a qualitative assessment, and the quantitative assessment was conducted through the percentage of variation of the radioactivity concentration estimate. At this time, the relationship between the radioactivity concentration estimate (cps/ml) and the actual radioactivity concentration (Bq/ml) was compared and analyzed using the recovery coefficient (RC_Recovery Coefficients) as an indicator. Results The results [CNR, radioactivity Concentration, RC] by the change in the number of projections for each increase or decrease rate (-90%, -75%, -50%, -25%, +50%, +100%) of total acquisition time are as follows. [-89.5%, +3.90%, 1.04] at -90%, [-77.9%, +2.71%, 1.03] at -75%, [-55.6%, +1.85%, 1.02] at -50%, [-33.6%, +1.37%, 1.01] at -25%, [-33.7%, +0.71%, 1.01] at +50%, [+93.2%, +0.32%, 1.00] at +100%. and also The results [CNR, radioactivity Concentration, RC] by the acquisition time change for each increase or decrease rate (-90%, -75%, -50%, -25%, +50%, +100%) of total acquisition time are as follows. [-89.3%, -3.55%, 0.96] at - 90%, [-73.4%, -0.17%, 1.00] at -75%, [-49.6%, -0.34%, 1.00] at -50%, [-24.9%, 0.03%, 1.00] at -25%, [+49.3%, -0.04%, 1.00] at +50%, [+99.0%, +0.11%, 1.00] at +100%. Conclusion In SPECT/CT, the total coefficient obtained according to the increase or decrease of the total acquisition time and the resulting image quality (CNR) showed a pattern that changed proportionally. On the other hand, quantitative evaluations through absolute quantification showed a change of less than 5% (-3.55 to +3.90%) under all experimental conditions, maintaining quantitative accuracy (RC 0.96 to 1.04). Considering the reduction of the total acquisition time rather than the increasing of the image acquiring time, The reduction in total acquisition time is applicable to quantitative analysis without significant loss and is judged to be clinically effective. This study shows that when increasing or decreasing of total acquisition time, changes in acquisition time per projection have fewer fluctuations that occur in qualitative and quantitative condition changes than the change in the number of projections under the same scanning time conditions.

• The Korean Journal of Mycology
• /
• v.4 no.1
• /
• pp.31-44
• /
• 1976

The studies were carried out to examine the effects of supplementation of nutritional substances and physical conditions in substrate on the mycelial growth and yield of fresh sporophores of winter mushroom, Flammulina velutipes(Curt. ex Fr.) Sing. and to obtain further informations on the nutritional requirements of the fungus with reference to improvement of substrate through [analysis of chemical composition of the substrates during the cultivation period. The results obtained are summarized as follows: 1. The best yield of fresh sporophores, 84.4 g per 280 g substrate in a bottle, was obtained from the mixture of poplar sawdust 10 and rice bran 3 by volume when Flammulina velutipes was cultivated on the poplar sawdust supplemented by rice bran, wheat bran, cattle manure and various combinations of these materials as nutrient sources. The substrates of poplar sawdust 10 plus rice bran 3 and 2 or wheat bran 3 with a higher yield of fresh sporophores showed a comparatively higher content of total nitrogen. total sugar, and potassium. 2. The mycelial growth of the fungus was compared on the substrates of poplar sawdust supplemented by the several nutrient sources and poplar sawdust alone. The fastest linear growth occurred on substrates of poplar sawdust alone and poplar sawdust plus cattle manure deficient in sugar and nitrogen sources, but mycelial density was more sparse on the substrates. Also, growth in a solution extracted from these substrates was very meager. 3. In the substrates which varied with bulk density and moisture content optimum bulk density and moisture content for mycelial growth was 0.2g/cc and 72% on a dry weight basis, respectively, but the highest yield of fresh sporophores was obtained at the bulk density of 0.3g/cc and moisture content of 67%. 4. By increasing the ratio of rice bran in poplar sawdust the loss of total weight and ash, content at each stage was increased, and during the cultivation period of 75 days, loss of total weight of the substrates at inoculation was 17.8 to 28.8% and ash content increased about 12%. 5. 11 to 14% of the cellulose and 3 to 4% of the lignin content per original substrate were decreased without a great difference depending of the mixing ratio of rice bran. The soluble glucose concentration in the substrates was increased during the same period. 6. In the process of vegetative and reproductive growth of the fungus upon the substrates, the total nitrogen was increased in quantity per dry weight of sample but was reduced in absolute quantity to a minute extent. There is no great changes in content of organic nitrogen including amino acid nitrogen, and hydrolysable ammonium nitrogen during the vegetative growth period, but occurrence of sporophores resulted in a decrease in the nitrogen content of these forms. On the one hand, by an increase of additive amounts of rice bran, nitrogen contents of these forms were higher and the reduction range during the reproductive growth period became wider. 7. Mycelial growth of the fungus was accelerated in various liquid media supplemented with organic nitrogen sources such as peptone and yeast extract in comparison with addition of inorganic nitrogen sources. Furthermore, mycelial growth was mere vigorous in the media with higher content of organic nitrogen sources.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.5-37
• /
• 1982

Plywood used for construction as a decorative inner material is inflammable to bring large fire accidents and burn out human life and their properties. To diminish the fire disaster, fire retardant plywood has been required indeed. In the methods of manufacturing the fire retardant plywood the soaking method is occasionally used. However after soaking plywood into fire retardant chemical solutions, redrying of soaked plywood is the most important. In this study, 3.5mm thin and 5.0mm thick plywoods were selected for fire retardant treatment. Treating solutions were prepared for 20% dilute solutions of ammonium sulfate, monoammonium phosphate, diammonium phosphate, borax-boric acid and minalith, and water solution. 1-, 3-, 6-, and 9 hour-soaking treatments were applied and after treatments hot plate drying was applied to those treated plywoods at $90^{\circ}C$, $120^{\circ}C$ and $150^{\circ}C$, of press temperature. Drying rates, drying curves, water absorption rates of fire retardant chemicals, weight per volume and fire retardant degree of plywood were investigated. The results may be summarized as follows: 1. The plywoods treated with ammonium sulfate, monoammonium phosphate and diammonium phosphate and diammonium phosphate showed increase of chemical absorption rate with proportion to increase of treating time, but not in case of the plywood treated with borax-boric acid and minalith. 2. In the treatment of definite time, the absorption rate per unit of volume of plywood showed higher in thin plywood (thickness of 3.5mm) than in thick plywood (thickness of 5.0mm). In both thin and thick plywoods, the highest absorption rate was observed in 9 hour-treatment of ammonium sulfate. The value was 1.353kg/$(30cm)^3$ in thin plywood and 1.356kg/$(30cm)^3$ in thick plywood. 3. The volume per weight of plywood after chemical treatment increased remarkably and. after hot plate drying, the values were to a little extent higher than before chemical treatment. 4. The swelling rates of thickness in chemical-treated plywoods increased similarly with that of water-treated plywood in 1- and 3 hour-treatment of both thin and thick plywoods. But in 6- and 9 hour-treatment, the greater increased value showed in water-treated ply wood than any other chemical, especially in thick plywood. 5. The shrinkage rates after hot plate drying showed the same tendency as the swelling rate, and the rate showed the increasing tendency with proportion to increase of treating time in thick plywood of both chemical and water treatments. 6. Among drying curves, the curves of water-treated plywood placed more highly than chemical-treated plywood without-relation to thickness in 6- and 9 hour-treatment except in 1- and 3 hour-treatment. 7. The drying rate related to thickness of treated plywood, was twice above in thin plywood compared with thick plywood. 8. The drying rate remarkably increased with proportion to increase of the plate temperature and, the values were respectively 1.226%/min., 6.540%/min., 25.752%/min. in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thin plywood and 0.550%/min., 2.490%/min, 8.187%/min, in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thick plywood. 9. In the treatment at $120^{\circ}C$ of hot plate temperature, the drying rates of chemical-treated plywood showed the highest value in monoammonium phosphate of thin plywood and in diammonium phosphate of thick plywood. But the drying rate of water-treated plywood was highest in 6- and 9 hour-treatment. 10. The fire retardant degree of chemical-treated plywood was higher than that of the untreated plywood as shown in loss of weight, burning time, flame-exhausted time and carbonized area. 11. The fire-retardant effect among fire retardant chemicals were the greatest in diammonium phosphate, the next were in monoammonium phosphate and ammonium sulfate, and the weakest were in borax-boric and minalith.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.3
• /
• pp.243-248
• /
• 2009

Purpose: Rehabilitation of the edentulous posterior maxilla with dental implants often poses difficulty because of insufficient bone volume caused by pneumatization of the maxillary sinus and by crestal bone resorption. Sinus grafting technique was developed to increase the vertical height to overcome this problem. The present study was designed to evaluate the sinus floor augmentation with anorganic bovine bone (Bio-$cera^{TM}$) using histomorphometric and clinical measures. Patients and methods: Thirteen patients were involved in this study and underwent total 14 sinus lift procedures. Residual bone height was ${\geq}2mm$ and ${\leq}6mm$. Lateral window approach was used, with grafting using Bio-$cera^{TM}$ only(n=1) or mixed with autogenous bone from ramus and/or maxillary tuberosity(n=13). After 6 months of healing, implant sites were created with 3mm diameter trephine and biopsies taken for histomorphometric analysis. The parameters assessed were area fraction of new bone, graft material and connective tissue. Immediate and 6 months after grafting surgery, and 6 months after implantation, computed tomography (CT) was taken and the sinus graft was evaluated morphometric analysis. After implant installation at the grafted area, the clinical outcome was checked. Results: Histomorphometry was done in ten patients.Bio-$cera^{TM}$ particles were surrounded by newly formed bone. The graft particles and newly formed bone were surrounded by connective tissue including small capillaries in some fields. Imaging processing revealed $24.86{\pm}7.59%$ of new bone, $38.20{\pm}13.19%$ connective tissue, and $36.92{\pm}14.51%$ of remaining Bio-$cera^{TM}$ particles. All grafted sites received an implant, and in all cases sufficient bone height was achieved to install implants. The increase in ridge height was about $15.9{\pm}1.8mm$ immediately after operation (from 13mm to 19mm). After 6 months operation, ridge height was reduced about $11.5{\pm}13.5%$. After implant installation, average marginal bone loss after 6 months was $0.3{\pm}0.15mm$. Conclusion: Bio-$cera^{TM}$ showed new bone formation similar with Bio-$Oss^{(R)}$ histomorphometrically and appeared to be an effective bone substitute in maxillary sinus augmentation procedure with the residual bone height from 2 to 6mm.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.815-823
• /
• 2014

This study was carried out to investigate the quality characteristics of muffins with added Pholiota adiposa powder. Muffins were prepared with different amounts of Pholiota adiposa powder (in 0, 2.5, 5, 10, and 15% ratios to the flour quantity). For analyzing the quality characteristics during the manufacturing of muffins, the pH, moisture content, dough density, height, specific volume, baking loss, texture, color, antioxidant activity, total polyphenol content, and sensory test results were determined. As the Pholiota adiposa powder content increased, the moisture content of the muffins decreased from 26.72 to 22.56%. The hardness of the muffins was increased with increasing Pholiota adiposa powder content, with the muffins with 15% Pholiota adiposa powder the hardest among all the samples. The inner color of the muffins, particularly the L and b values, decreased with increasing powder content compared to those of the control, but the a value increased. As the Pholiota adiposa powder content increased, the antioxidant activity and total polyphenol content of the muffins also increased. In the sensory evaluation, the muffins with 5% Pholiota adiposa powder showed higher values than the control and the other samples in all aspects, showing that 5% Pholiota adiposa powder could be incorporated into muffins to meet the taste and functional needs of the consumers.

• Journal of Biomedical Engineering Research
• /
• v.25 no.3
• /
• pp.171-182
• /
• 2004

This study investigates the biomechanical efficacies of vertebroplasty which is used to treat vertebral body fracture with bone cement augmentation for osteoporotic patients using image and finite element analysis. Simulated models were divided into two groups: (a) a vertebral body, (b) a functional spinal unit(FSU). For a vertebral body model, the maximum axial displacement was investigated under axial compression to evaluate the effect of structural integrity. The stiffness of each FE model simulated was normalized by the stiffness of intact model. In the case of FSU model, 3 types of compression fractures were formulated to assess the influence on spinal curvature changes. The FSU models were loaded under compressive pressure to calculate the change of spinal curvature. The results according to the various factors suggest that vertebroplasty has the biomechanical efficacy of the increment of structural reinforcement in a patient who has relatively high level of BMD and a patient with the amount of 15％, PMMA injection of the cancellous bone volume. The spinal curvatures after compression fracture simulation vary from 9$^{\circ}$ to 17$^{\circ}$ of kyphosis compared to that the spinal curvature of normal model was -2.8$^{\circ}$ of lordosis. These spinal curvature changes cause the severe spinal deformity under the same loading. As the degree of compressive fracture increases the spinal deformity also increases. The results indicate that vertebroplasty has the increasing effect of the structural integrity regardless of the amount of PMMA or BMD and the restoration of decreased vertebral body height may be an important factor when the compressive fracture caused the significant height loss of vertebral body.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.295-303
• /
• 2007

A preliminary diet experiment utilizing Jerusalem artichoke's inulin, lotus leaf powder, nettle powder and eucalyptus powder extract indicated that combining all four elements gave the most effective result. Therefore, a study was conducted to evaluate the effectiveness of combined diet for weight loss. In this study, Sprague-Dawley, male white rats about 200 g in weight was fed with high fat diet for 8 weeks in order to induce obesity followed by 4 week administration of combined diet to look into the effect of the diet. After a total of 12 weeks of feeding, factors relevant to weight, blood, and lipid metabolism by liver in the body were researched and histologic change was examined with optical microscope. In terms of weight change, both high fat diet group and regular diet group gained weight from high fat diet for 8 weeks compared to normal group. Then, for another 4 weeks, while normal group and high fat diet group kept gaining weight, combined diet group which was provided with high fat diet for 8 weeks, lost weight to the normal group level after 3 week administration of diet. However, after the 4th week of administration, the group weighted significantly less than the normal group and the efficiency of diet also significantly dropped. In the biochemical analysis of blood, total cholesterol, LDL-cholesterol, triglyceride, glucose, GOT, GPT, ${\gamma}-GTP$ and creatine showed significant increase in high fat diet group and there was no significant difference between diet group and normal group except for GPT, ${\gamma}-GTP$ and creatine. In the biochemical analysis of liver, there was significant increase in LDL-cholesterol, triglyceride of high fat diet group compared to normal group, while there was no significant difference in term of total cholesterol and HDL-cholesterol. Compared to normal group, diet group had higher HDL-cholesterol, while total cholesterol dropped significantly. There was no significant difference in terms of LDL-cholesterol and triglyceride. Besides, in high fat diet group, observation of histologic change in liver and change in ultrastructure showed volume increase of hepatic cell and severe fatty degeneration in hepatic cell around hepatic vein. However in diet group, like normal group, no pathological change was observed in terms of cytoplasm, nucleus and capillary in hepatocyte and the alignment of hepatocyte had regularity thanks to the administration of combined diet. Therefore, combined diet utilizing Jerusalem artichoke's inulin, lotus leaf powder, nettle powder and eucalyptus powder was proven to be an effective measure to prevent and improve obesity as a result of abnormal adipose deposition.

• Korean journal of food and cookery science
• /
• v.26 no.5
• /
• pp.503-510
• /
• 2010

Different amounts of black garlic extract(0, 1, 3, 6, 9 and 12%(W/W)) were added to white pan bread, and the quality characteristics were evaluated. The pH and density of dough was decreased with increasing concentration of black garlic extract. There was no marked difference in the fermentation power of the dough expansion among the samples. The pH of bread decreased, and there were no significant differences in baking loss rate, dough yield or bread specific volume as the concentration of black garlic extract was increased. Regarding crust and crumb color values, lightness gradually diminished with increased amounts of black garlic extract in bread, whereas redness and yellowness increased. For measurement of texture, the highest hardness and gumminess of bread were observed in the 1% added group, and there was no remarkable difference between the 3% added group and control. Sensory evolution was the highest when 6% black garlic extract was added, but there were no significant differences in terms of color or overall acceptability. The results imply that addition of black garlic extract to white pan bread created a healthy and functional bread.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.1
• /
• pp.72-84
• /
• 1993

This study was carried out to understand the varietal variation in physicochemical properties of rice grain and those environmental changes by different transplanting time, and to elucidate the interrelationships among the factors related with eating quality of cooked rice. Fifty three rice samples, among which fifty samples were harvested at ordinary or late transplanted plots of the Crop Experiment Station in Suwon and three samples were harvested orpurchased from Niigata prefecture in Japan, were tested for various physicochemical components of rice grain and some physical factors of cooked rice. All of twenty seven rice cultivars tested were the recent-bred Korean japonica rice showing the wide range of maturity from early to medium-late heading and considerable difference in palatability of cooked rice. Amylose content, taste value by Nireco palatability tester (TVN), iodine blue color of cooking extracts(IB), and the ratio of IB /extracted solid amounts (ES) increased significantly by late transplanting, while viscosity (VN) and Mg / K. N value by Nireco tester, hot-water absorption of milled rice (HA), loss tangent of cooked rice by Rheolograph-Micro(LT), and most viscogram characteristics except setback viscosity (C-P) decreased drastically by late transplanting as compared with ordinary transplanting. Most of physicochemical properties of milled rice revealed narrower varietal variation in lately transplanted plot than in ordinary transplanted one. Protein content (PRO), volume expansion rate of cooked rice(VE), C-P and all physical factors of cooked rice by Rheolograph-Micro showed almost negligible seasonal variation, while amylose content (AM), VN, HA, IB/ES, peak viscosity(P), hot viscosity(H) and breakdown(P-H) viscosity exhibited considerably large seasonal variation. The early-headed varieties revealed lower amylose content and smaller seasonal variation of IB/ES compared with medium or medium-late headed rice varieties. AM was closely associatied with IB and IB / ES and VN was highly correlated with Mg/K. N and TVN in both ordinary and late transplanted plots. VN also was highly negatively correlated with cooking characteristics and highly positively correlated with viscogram properties in ordinary culture. PRO was closely connected with moisture content of milled rice and L T in ordinary transplanted plot. IB, which was closely connected with ES, was also singificantly associated LT, P and P-H in ordinary seasonal culture. IB/ES was highly negatively correlated with P, P-Hand P-H / C-P in ordinary culture but with LT and dynamic viscosity of cooked rice in late seasonal culture. The thirty rice cultivars were largely classified into two varietal groups by cluster analysis with physicochemical properties related with eating quality of cooked rice. Korean and Japanese high-quality rice cultivars were separately distributed in two respective varietal group.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1474-1481
• /
• 2011

This study investigated the physicochemical characteristics of Korean wheat flour substituted for 0%, 15%, 30%, 45%, and 60% durum rimachinata wheat in order to develop a Korean wheat pasta suitable for consumer-preferred soft textures. The particles of Korean wheat that were less than 250 ${\mu}M$ were 87.03% of all particles, while 68.7% of durum rimachinata had particles more than 250 ${\mu}M$ in size. Durum rimachinata had more protein (13.84${\pm}$0.03) and ash (0.70${\pm}$0.02) than Korean wheat. In farinograph characteristics, water absorption, development time, stability, and weakness increased as the amounts of substituted Korean wheat flour increased. Also, the gelatinization characteristics of the amylograph exhibited an increase of gelatinization temperature and decrease in maximum viscosity. However, maximum viscosity was shown to be more than 550 B.U. until 30% of the substitution level of Korean wheat flour to durum rimachinata wheat. Also, it did not affect the texture of the noodle product. We could make pasta with softness and springiness with less than a 15% substitution level of Korean wheat flour due to similar characteristics in cooking properties such as weight, volume, water absorption, turbidity, and cooking loss when compared to the control. L and a values increased, and the b value decreased in color as substitution amounts of Korean wheat flour increased. The hardness and adhesiveness of cooking noodles was shown to be a low value at more than a 30% substitution level of Korean wheat flour, and springiness, gumminess, and chewiness all exhibited high values. In a sensory evaluation, overall acceptability was shown to have the highest score in control. More than 30% of substitution of Korean wheat flour showed high preferences. Therefore, 15% of the substitution level of Korean wheat flour could be adapted in dough and cooking properties for making pasta-substituted Korean wheat. However, a texture analyzer and sensory evaluation of cooked pasta was shown to have a good quality at more than 30% substitution level of Korean wheat flour.