• The Journal of the Petrological Society of Korea
• /
• v.25 no.1
• /
• pp.95-106
• /
• 2016

The distribution of active volcanoes in China, overview of an active volcano monitoring of China, monitoring equipment status in China volcano observatory, and Changbaishan volcano observatory and volcano early warning system plan were investigated in this study.

• Korean Journal of Remote Sensing
• /
• v.33 no.1
• /
• pp.37-46
• /
• 2017

Sinabung volcano in Indonesia was formed due to the subduction between the Eurasian and Indo-Australian plates along the Pacific Ring of Fire. After being dormant for about 400 years, Sinabung volcano erupted on the 29th of August, 2010 and most recently on the 1st of November, 2016. We measured the deformation of Sinabung volcano using Advanced Land Observing Satellite/Phased Array type L-band Synthetic Aperture Radar(ALOS/PALSAR) interferometric synthetic aperture radar(InSAR) images acquired from February 2007 to January 2011. Based on multi-temporal InSAR processing, we mapped the ground surface deformation before, during, and after the 2010 eruption with time-series InSAR technique. During the 3 years before the 2010 eruption, the volcano inflated at an average rate of ~1.7 cm/yr with a markedly higher rate of 6.6 cm/yr during the 6 months prior to the 2010 eruption. The inflation was constrained to the top of the volcano. From the 2010 eruption to January 2011,the volcano subsided by approximately 3 cm (~6 cm/yr). We interpreted that the inflation was due to magma accumulation in a shallow reservoir beneath Sinabung. The deflation was attributed to magma withdrawal from the shallow reservoir during the eruption as well as thermo-elastic compaction of erupted material. This result demonstrates once again the utility of InSAR for volcano monitoring.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.545-554
• /
• 2013

Augustine is an active stratovolcano located in southwest of Cook Inlet, about 290 kilometers southwest of Anchorage, Alaska. Between January 11 and 28, 2006, the volcano erupted explosively 14 times. We collected twelve permanent GPS stations operating by Plate Boundary Observatory (PBO) from 2005 to 2011. All data processing was carried out using Bernese GPS Software V5.0 with IGS precise orbit. Static baseline processing by fixing AC59 station was applied for the volcano activity monitoring. AC59 is the nearest (about 24.5 km) station to Augustine volcano, and located on North America Plate including Augustine Island. The test results show inflation (9.7 cm/yr) and deflation (-9.2 cm/yr) of volcano before and after eruption around crater clearly. After volcano activity has reached a plateau, some of the GPS stations installed north of the volcano show ground subsidence phenomenon caused by compaction of pyroclastic flows. These results indicate the possibility of using surface deformation observed by GPS for monitoring and prediction of volcano activity.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.1
• /
• pp.49-66
• /
• 2018

Volcano hazard mapping became a focus of scientific inquiry in the 1960s. Dwight Crandell and Don Mullineaux pioneered the geologic history approach with the concept of the past is the key to the future, to hazard mapping. The 1978 publication of the Mount St. Helens hazards assessment and forecast of an eruption in the near future, followed by the large eruption in 1980 demonstrated the utility of volcano hazards assessments and triggered huge growth in this area of volcano science. Numerical models of hazardous processes began to be developed and used for identifying hazardous areas in 1980s and have proliferated since the late 1990s. Model outputs are most useful and accurate when they are constrained by geological knowledge of the volcano. Volcanic Hazard maps can be broadly categorized into those that portray long-term unconditional volcanic hazards-maps showing all areas with some degree of hazard and those that are developed during an unrest or eruption crisis and take into account current monitoring, observation, and forecast information.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.1
• /
• pp.35-47
• /
• 2013

The Baegdusan Volcano which erupted violently at 1000 AD is still have possibility of eruption. Therefore, it is necessary to monitor regularly the possibility of eruption. However, it is very difficult to install regular monitoring system or to get regularly monitored data due to geopolitic problems. This is why we have to develop regular monitoring technique using satellite. The geoid in the Baegdusan Volcanic area calculated from gravity data obtained from GRACE satellite, decreased from 2002 to 2005. The period of decreasing is well matched with time when magma activities were recognized in the Baegdusan Volcanic area. The decrease in geoid is interpreted to be caused by the decrease of water storage. Considering that the amount of rainfall from 2002 and 2005 is almost constant, the decrease in geoid may be related to the magma activity under the Baegdusan Volcano. The geomagnetic total force in the Baegdusan Volcanic area measured by CHAMP satellite, decreased from 2000 to 2005 and increased after 2005. The period of decrease is well matched with the time with increased activity of magma chamber under the Baegdusan Volcano indicating that the decrease of geomagnetic total force is caused by demagnetization of surrounding rocks due to the increase of temperature of magma chamber. These data indicate the possbility of using change of geoid and geomagnetic total force observed by GRACE and CHAMP satellites for the monitoring of magma activity under the Baegdusan Volcano.

• Korean Journal of Remote Sensing
• /
• v.34 no.1
• /
• pp.75-87
• /
• 2018

The Baekdu volcano (2,750 m a.s.l.) is located on the border between Yanggando Province in North Korea and Jilin Province in China. Its eruption in 946 A.D. was among the largest and most violent eruptions in the past 5,000 years, with a volcanic explosivity index (VEI) of 7. In this study, we processed and analyzed lahar-inundation hazard zone data, applying a geographic information system program with menu-driven software (LAHARZ)to a shuttle radar topography mission 30 m digital elevation model. LAHARZ can simulate inundation hazard zones created by large lahar flows that originate on volcano flanks using simple input parameters. The LAHARZ is useful both for mapping hazard zones and estimating the extent of damage due to active volcanic eruption. These results can be used to establish evacuation plans for nearby residents without field survey data. We applied two different simulation methods in LAHARZ to examine six water systems near Baekdu volcano, selecting weighting factors by varying the ratio of height and distance. There was a slight difference between uniform and non-uniform ratio changes in the lahar-inundation hazard zone maps, particularly as slopes changed on the east and west sides of the Baekdu volcano. This result can be used to improve monitoring of volcanic eruption hazard zones and prevent disasters due to large lahar flows.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_3
• /
• pp.1221-1233
• /
• 2019

Estimating damage in each sector that can be caused by volcanic ash deposition, is very important to prepare the volcanic ash disaster. In this study, we showed predicted-Korean-volcanic-ash damage of each sector by using volcanic ash diffusion simulation and spatial-data-based volcanic ash damage sector in previous study. To this end, volcanic ash related base maps were generated by collecting and processing spatial information data. Finally, we showed Korean-volcanic-ash-deposition damages by sector using the collected Mt. Aso volcanic ash scenarios via overlapping analysis. As a result, volcanic-ash-related damages were expected to occur in the 162 and 134 districts for each Aso volcanic ash scenarios, since those districts exceeds the minimum volcanic ash damage criterion of 0.01 mm. Finally, we compared possible volcanic ash damages by sectors using collected and processed spatial data, after selecting administrative districts(Scenario 190805- Kangwon-do, Kyungsangbuk-do; Scenario 190811-Chuncheon-si, Hongcheon-si) with the largest amount of volcanic ash deposition.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1503-1517
• /
• 2018

Mt. Baekdu is a stratovolcano located at the border between China and North Korea and is known to have formed through its differentiation stage after the Oligocene epoch in the Cenozoic era. There has been a growing interest in the magma re-activity of Mt. Baekdu volcano since 2010. Several research projects have been conducted by government such as Korea Meteorological Administration and Korea Institute of Geoscience and Mineral Resources. Because, however, the Mt. Baekdu volcano is located far from South Korea, it is quite difficult to collect in-situ observations by terrestrial equipment. Remote sensing is a science to analyze and interpret information without direct physical contact with a target object. Various types of platform such as automobile, unmanned aerial vehicle, aircraft and satellite can be used for carrying a payload. In the past several decades, numerous volcanic studies have been conducted by remotely sensed observations using wide spectrum of wavelength channels in electromagnetic waves. In particular, radar remote sensing has been widely used for volcano monitoring in that microwave channel can gather surface's information without less limitation like day and night or weather condition. Radar interferometric technique which utilized phase information of radar signal enables to estimate surface displacement such as volcano, earthquake, ground subsidence or glacial movement, etc. In 2018, long-term research project for collaborative observation for Mt. Baekdu volcano between Korea and China were selected by Korea government. A volcanic specialized research center has been established by the selected project. The purpose of this paper is to introduce about remote sensing techniques for volcano monitoring and to review selected studies with remote sensing techniques to monitor Mt. Baekdu volcano. The acquisition status of the archived observations of six synthetic aperture radar satellites which are in orbit now was investigated for application of radar interferometry to monitor Mt. Baekdu volcano. We will conduct a time-series analysis using collected synthetic aperture radar images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.4
• /
• pp.357-372
• /
• 2016

Augustine volcano, located along the Aleutian Arc, is one of the most active volcanoes in Alaska and nearby islands, with seven eruptions occurring between 1812 and 2006. This study monitored the surface displacement before and after the most recent 2006 eruption. For analysis, we conducted a time-series analysis on data observed at the permanent GPS(Global Positioning System) observation stations in Augustine Island between 2005 and 2011. According to the surface displacement analysis results based on GPS data, the movement of the surface inflation at the average speed of 2.3 cm/year three months prior to the eruption has been clearly observed, with the post-eruption surface deflation at the speed of 1.6 cm/year. To compare surface displacements measurement by GPS observation, ENVISAT(Environmental satellite) radar satellite data were collected between 2003 and 2010 and processed the SBAS(Small Baseline Subset) method, one of the time-series analysis techniques using multiple InSAR(Interferometric Synthetic Aperture Radar) data sets. This result represents 0.97 correlation value between GPS and InSAR time-series surface displacements. This research has been completed precise surface deformation using GPS and time-series InSAR methods for a detection of precursor symptom on Augustine volcano.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.119-138
• /
• 2014

There are various ways to monitor active volcanoes, such as the method of observing the activity of a volcano with the naked eye, the method of referring to the past eruptive history based on the historic records and the method of monitoring volcanoes by using observation equipment. The most basic method from the observation equipment-using methods to monitor volcanoes is seismic monitoring. In addition to this, the ways to monitor volcanoes are as follows: resonance observation which may be effective to remove artificial noises from the seismic activities that are recorded in the seismograph, ground deformation by using precision leveling, electronic distance measurement, tiltmeter, GPS, and InSAR observation method, volcanic gas monitoring, hydrologic and meteorological monitoring, and other geophysical monitoring methods. These monitoring methods can make volcanic activities effectively monitored, determine the behavior of magmas in magma chambers and help predict the future volcanic eruptions more accurately and early warning, thus, minimize and mitigate the damage of volcanic hazards.