• Korean Journal of Plant Resources
• /
• v.17 no.2
• /
• pp.75-81
• /
• 2004

This study was conducted to investigate effects of cryopreservation by vitrification on the seed germination rate and growth and physiological properties of seedlings of Maackia amurensis. Cryopreservation significantly decreased the germination rate of seeds of M. amurensis, but the reduction of germination rate was mitigated by the treatment of cryoprotectant (plant vitrification solution, PVS2) before plugging into liquid nitrogen and fast thawing rate after cryopreservation. Long-term PVS2 exposure decreased seed germination rate, whereas cryopreservation time didn't have influence on seed germination rate. In addition, growth and physiological properties of seedlings were not affected by PVS2 exposing time and cryopreservation time. Therefore cryopreservation could be widely used as a technique of long-term ex situ conservation without any damage and deterioration of cells or tissues of the forest seeds. However, in order to increase the effect of cryopreservation, we have to develope the lower toxic cryoprotectant and suitable techniques to the structural or chemical properties of a variety of seeds.

• Korean Journal of Animal Reproduction
• /
• v.14 no.1
• /
• pp.43-49
• /
• 1990

To improve the freezing techniques of animal embryos using vitrification solution as a cryoprotectant rabbit embryos, by cell stages, dehydration temperature and dehydration temperature and dehydratin time, were frozen-thawed and cultured. Following are the main results obtained. 1. The damage rate of zona pellucida after thawing was higher(13.6%) when the cell stage of embryos was less than 4 cells than when the cell stage was 8~16 cell or morula. The damage rate was higher when the dehydration temperature was 4$^{\circ}C$ than -3$0^{\circ}C$ or -50~-8$0^{\circ}C$. The zona pellucida was damaged more when dehydrated for 5 min than when dehydrated for 10~15 min. 2. After being cultured for 72 hours, 5.3% of 4 cell(or less) embryos were developed to morula, while 86.4% of morula embryos were developed further. 3. More percentage of embryos(73.2%) was developed when dehydrated at -3$0^{\circ}C$ than when dehydrated at 4$^{\circ}C$ at -5$0^{\circ}C$~-8$0^{\circ}C$. 4. The hatching rate was higher when dehydrated for 5 min. When the embryos were dehydrated for 10~15 min and cultured for 24 hours, they were not even developed or development was not good in later stages.

• Plant Biotechnology Reports
• /
• v.3 no.1
• /
• pp.103-109
• /
• 2009

In this study we established reliable methods for conservation of seeds of Phaius tankervilleae as an orchid genetic resource. The seeds, which were dehydrated to 5% water content and preserved at $4^{\circ}C$, showed no decrease in viability and germinability after three months. After storage for six months, however, the seeds showed a drastic decrease in germinability, even though survival rate was high. For long-term preservation of seeds of P. tankervilleae, cryopreservation is applied to the freshly harvested seeds. When the seeds were cryopreserved by the vitrification method for up to 12 months there was no apparent deterioration effect of storage time. These results indicate that cryopreservation by the vitrification method is useful for long-term conservation of P. tankervilleae seeds, which are difficult to preserve for more than three months under dry and low-temperature conditions.

• Journal of Embryo Transfer
• /
• v.6 no.2
• /
• pp.30-36
• /
• 1991

The method of vitnilcation has various merits. It needs neither seeding nor slow freezing. It can freeze embryo by putting it directly into liquid nitrogen at the indoor temperature to $0^{\circ}C$. The operation process is quite easy. Moreover, higher promise of survival can be expected as there is no physical damage by any lumps of ice with the exception of cells. In Kasal's experiment (1990) using EFS liquid and Kang's experiment (1991) using GFS liquid the ratio of the damaged embryo was only 2-3%. But, the method of vitrification is now on the process of improvement, and the final or united method is not yet established. At the present time, most of the major institutes all over the world are using the traditional freezing method in the preservation of mouse embryo, but it is very likely that the vitrification will prevaIl in the near future considering the various merits of it. Calves can be begotten from the embryo by means of vitriilcated preservation in the cases of cow, rat, and rabbit as well as of mouse. In addition, recent experiments have shown that vitrificated preservation was successful in the case of drosophila embryo which was much bigger than mammalian embryo, which fact tells that this method is expected to be preferably used even in the preservation of living organs in the near future.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.146-153
• /
• 2006

A performance test of the stainless steel based sintered metal filter was conducted on the low and intermediate level radioactive waste (LILW) vitrification process. The applicability of the metal filter was based on the test results as well. The baseline pressure drop of the metal filter was evaluated similar to the ceramic filter. During the test, when the flow rate of off-gas was $110Nm^{3}/h$, the total baseline pressure drop was shown as $92mmH_{2}O$. The total pressure drop was attributed to the filter media and the residual dust layer and the value of each was $25mmH_{2}O\;and\;67mmH_{2}O$ respectively. The SEM-EDS spectrum and micrograph of the metal filter specimen showed, no corrosion and no physical damage both at the skin membrane and at the support layer. And most of the baseline pressure drop was caused by the deposition of dust on the surface of the membrane. In conclusion, even though the filter exposure time was short at the test, the performance of the stainless steel based metal filter was acceptable for the treatment of LILW vitrification process.

• Development and Reproduction
• /
• v.22 no.3
• /
• pp.245-252
• /
• 2018

To improve survival rates of vitrified pig oocytes, the treatment of cytoskeletal stabilizer on an appropriate time is one of the possible approaches. However, the exact treatment timing and effect of cytoskeletal stabilizer such as cytochalasin B (CB) is not well known during oocyte vitrification procedures. Thus, the present study was conducted to determine optimal treatment timing of CB during vitrification and warming procedures. In experiment 1, the survival rates of the postwarming pig oocytes were analyzed by fluorescein diacetate (FDA) assays with 4 classifications. In results, post-warming oocytes showed significantly (p<0.05) decreased number of alive oocytes (31.8% vs. 86.4%) compared to fresh control. In detail, the significant difference (p<0.05) was found only in strong fluorescence (18.2% vs. 70.5%) not in intermediate fluorescence groups (13.6% vs. 15.9%). In experiment 2, CB was treated before (CB-Vitri) and after (Vitri-CB) vitrification. In results, group of Vitri-CB showed significantly (p<0.05) higher (91.6%) survival rates compared to group of CB-Vitri (83.7%), significantly (p<0.05) and comparable with group of Vitri Control (88.7%) by morphological inspection. In FDA assay results, group of Vitri-CB showed significantly (p<0.05) higher (44.2%) survival rates compared to groups of CB-Vitri (36.7%) and Vitri Control (35.1%). In conclusion, the increased survival rates of post-warming pig oocyte treated with Vitri-CB method are firstly described here. The main finding of present study is that the CB treatment during recovery could be helpful to refresh the post-warming pig oocyte resulting its improved survival rates.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.837-844
• /
• 2000

The cure behavior of commercial epoxy molding compounds (EMC) commonly used for IC package was studied at constant cure temperatures as well as at constant heating rates using differential scanning calorimetry (DSC), rheometer, and dielectric analyzer (DEA). The cure kinetics were obtained using autocatalytic reaction model according to the Ryan Dutta method after assuming m+n equal to 2. The prediction of reaction rates by the model equation corresponded well to experimental data at all temperatures except for 10$0^{\circ}C$. The phase transitions such as gelation and vitrification occurred during network formation. At each isothermal cure temperature, $T_{g}$ was measured in accordance with cure time, and the vitrification point was attained when $T_{g}$ was equal to $T_{cure}$. The temperature dependence of gel points and vitrification points showed good agreement with Arrhenius relation. DEA using parallel plate electrode was effective for the monitoring of EMC cure. we knew that if the resin systems are materials of comparable quality, $_{gel}$$T_{g}$ is constant regardless of accelerator concentration in TTT (Time-Temperature-Transformation) diagram.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.83-83
• /
• 2002

The purpose of this study was to investigate the warming temperature and exposed time on the post-thaw survival rate and viability of bovine blastocyst cryopreserved by GMP vitrification. Groups of three bovine IVP blastocysts were sequentially placed into vitrification solution before being loaded into the GMP straws and immersed into LN$_2$within 20 to 25 sec. The warming rate was increased 2 times of warming temperature for improvement of post-thaw survival rates. The frozen embryos were warmed either at 35 or 70$^{\circ}C$ for 1 or 2 sec and then diluted in sucrose solution. Post-thaw blastocysts were serially washed in 0.25 and 0.15 M sucrose in holding medium (HM: TCM199 supplemented with 10% FCS) and TCM-199 for each 5 min, respectively, and then cultured in TCM199 for 24 h. The rate of re-expanded blastocyst was significantly different fer 35 and 70$^{\circ}C$ warming temporature (76.4 vs. 89.3%; P<0.05). The rate of re-expanded blastocyst at 70$^{\circ}C$ for 1 sec was significantly higher than that for 2 sec (91.1 vs. 70.9%; P<0.05). The number of nuclei counted were significantly different among control, 35 and 70$^{\circ}C$ (121${\pm}$8.5 vs. 104${\pm}$11.7 vs. 114${\pm}$10.3; P<0.05). These results indicated that the increasing of warming rate can provide high survival rates of bovine IVP blastocysts. Especially, the best viability of post-thaw blastocyst could be thaw at 70$^{\circ}C$ for 1 sec. The warming temperature and exposed time far warming was considered to be limiting factors to the viability of bovine IVP embryos. he purpose of this study was to investigate the warming temperature and expose.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.341-344
• /
• 1997

A vitrification process is under development in KEPRI for the treatment of low-and medium-level radioactive waste. Although the project is for developing and building Vitrification Pilot Plant in Korea, one of KEPRI's concerns is the quality control of the vitrified glass. This paper discusses a methodology for the estimation of glass composition by on-line measurement of molten glass properties, which could be applied to the plant for real-time quality control of the glass product. By remotely measuring viscosity and density of the molten glass, the glass characteristics such as composition can be estimated and eventually controlled. For this purpose, using the database of glass composition vs. physical properties in isothermal three-component system of SiO$_2$-Na$_2$O-B$_2$O$_3$, a software TERNARY has been developed which determines the glass composition by using two known physical properties(e.g. density and viscosity).

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.203-205
• /
• 2014

This paper is suggesting about glass melting technology, using both plasma and combustion heat source. The mixed flame was formed to flow pattern of turning by plasma and combustion in melting zone. The burning time was extremely extended for vitrification of raw materials in melting zone, as a result, meting time was significantly reduced. This system was designed to smaller size than existing glass melting facilities. We had achieved to 30% energy saving, due to reduce residence time of melted materials inside furnace.