• 감성과학
• /
• 제6권4호
• /
• pp.15-23
• /
• 2003

근래에 들어 질병으로 인하여 의사표현이 곤란한 환자에게 뇌파에 기초한 BCI(Brain Compute, Interface)와 같은 새로운 인터페이스를 제공하고자 하는 연구가 활발히 진행되고 있다. 특정 자극에 대해 유발되는 뇌파의 측정과 분석은 BCI를 위한 뇌파의 패턴과 인터페이스의 설계에 중요한 역할을 한다. 이 연구의 목적은 시청각 자극 인가 후 피험자의 반응시간을 측정하는 시스템을 EEG와 같은 생체 신호 계측 시스템과 연동이 가능한 형태로 개발하는 것이다. 제안된 시스템은 기능적으로 자극신호 발생부, 반응시간 측정부, 유발뇌파 측정부, 동기신호 발생부로 나뉘어진다. 자극신호 발생부는 실험에 이용되는 자극신호를 제작하는 부분으로서 Flash를 사용하여 구현하였다. 반응시간 측정부는 문제에 대한 답 선택 요청시각으로부터 피험자의 반응까지의 시간을 측정하는 부분으로서 마이크로컴퓨터를 이용하여 구현하였다. 유발뇌파 측정부는 시판용 하드웨어와 소프트웨어를 그대로 사용하였다. 동기신호 발생부는 전체 시스템의 동기를 맞추기 위한 신호를 발생하는 부분으로서 문제제시, 답 요구와 동기한 화면상의 명암신호와 이를 검출하는 광센서로 구성하였다. 본 논문에서 제시한 방법에서는, 기존의 유발전위 측정 및 자극시스템에 특정 모듈(반응시간 측정 장치, 동기신호 발생장치)만을 추가하여 실험자의 의도에 맞는 시스템을 설계할 수 있어 유발응답 및 반응시간의 측정을 필요로 하는 연구를 가속화 할 것이 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.279-282
• /
• 2002

In this paper, we present a new method for monitoring of ECU's self diagnostic signals of vehicle without wire. In order to measure the ECU's self diagnostic signals, the interfaced circuit is designed to communicate ECU and a designed display terminal according to the ISO, SAE regulation of communication protocol standard. A 80C196KC processor is used for communicating ECU's self diagnostic signals and the results are sent to PDA monitoring system. Software on PDA is developed to monitor the ECU's self diagnostic signals using the Embedded Visual C++ compiler in which RS232 port is programmed by half duplex method. The algorithms for measuring the ECU's self diagnostic signals are verified to monitor ECU's state. At the same time, the information to fix the vehicle's problem can be shown on the developed PDA software. The possibility for remote measurement of ECU self diagnostic signal using PDA is also verified through the developed systems and algorithms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1331-1334
• /
• 2004

The research on electromagnetic shielding has been advanced for military applications as well as for commercial products. Utilizing the reflective properties and absorptive properties of shielding material, the replied signal measured at the rear surface or at the signal source can be minimized. The shielding effect was obtained from materials having special absorptive properties or from structural characteristics such as stacking sequence. Recently researchers studied the electromagnetic properties of nano size particles. In this research {glass fiber}/{epoxy}/{nano particle} composites(GFR-Nano composites), was fabricated using various nano particles, and their properties in electromagnetic shielding were compared. For the visual observation of the nano composite materials, SEM(Scanning Electron Microscope) and TEM(Transmission Electron Microscope) were used. For the measurement of electromagnetic shielding, HP8719ES S-parameter Vector Network Analyser System was used on the frequency range of 8 GHz～12GHz. Among the nano particles, carbon black and Multi-Walled Carbon Nano-Tube (MWCNT) revealed outstanding electromagnetic shielding. Although silver nano particles (flake and powder) were expected to have effective electromagnetic shielding due to their excellent electric conductivities, test showed little shielding effect.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.192-196
• /
• 2010

Due to a development of a modem technology as Power Line Communication(PLC) over 200 Mbps, the high-speed multi-media data trasmission could be currently possible. The strength of the PLC has no more additional wiring work. PLC has also possible to high quality data transmission with currently electrical cable. It has a various strong point campare with existing wire and wireless communication technologies. In This paper we develop a high quality media transmitter-receiver based on merging the HomePlug AV, which is 200 Mbps class PLC technology and HDMI Interface technology. The video function was used for the VEDEO TEST GENERATOR in order to a property valuation. Smart Live 6 software were used for the assessment of audio property. As the result of measurement of the HD class images by capturing from the receiver of the PLC, the quality of images couldn't be confirm any deterioration, which has compared with original reflections. In case of audio part as the result of confirmation of the Phase, Magnitude, it has been confirmed that over 90% of nomal transmition and receiving of acoustic signal. It can be possible to have HD class Media service through the PLC.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.163-171
• /
• 2020

The condition of tire tread is a key parameter closely related to the driving safety of a vehicle, which affects the contact force of the tire for braking, accelerating and cornering. The major factor influencing the contact force is tread wear, and the more tire tread wears out, the higher risk of losing control of a vehicle exits. The tire tread condition is generally checked by visual inspection that can be easily forgotten. In this paper, we propose the intelligent tire (iTire) system that consists of an acceleration sensor, a wireless signal transmission unit and a tread classifier. In addition, we also presents classification algorithm that transforms the acceleration signal into the frequency domain and extracts the features of several frequency bands as inputs to an artificial neural network. The artificial neural network for classifying tire wear was designed with an Multiple Layer Perceptron (MLP) model. Experiments showed that tread wear classification accuracy was over 80%.

• 한국항해학회지
• /
• 제23권3호
• /
• pp.1-15
• /
• 1999

Recently, due to the several factors such as the advent of very large vessels and high-speed vessels, and the increase of the maritime traffic density at sea, the obligation, responsibility and burden of marine officers on duty for the safety of navigation has been highly escalated. Under these situations, if the appropriate and correct navigational information is given to officers at real time by means of certain integrated information processing system, these obligation, burden and danger can be reduced. This paper deals with the study on the development of the Navigational Information Monitoring and Recording System that can give and record the integrated navigational information based on the personal computer system installed on board. To construct this system, the interface unit which changes different signal types of navigational equipments to NMEA 0183 signal format and the application software to show the visual navigational information were developed. In this study, the navigation system of T/S HANBADA in Korea Maritime University was used in order to construct the actual system that can be utilized in other ships, and also the performance test was carried out several times to examine the performance of the system developed. It was proved that all functions of the system as designed worked smoothly through the performance test. Also this system could be operated easily and conveniently by every user.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.922-924
• /
• 2015

현재 영화, TV, 카메라, 광고 등과 같은 대중 매체를 이용한 영상 처리 기술들이 급속도로 발전되고 있다. 그러나 영상은 데이터를 처리 전송 및 저장하는 과정에서 열화가 발생하며, 주요한 원인은 salt and pepper 잡음이 대표적이다. salt and pepper 잡음을 제거하기 위한 대표적인 필터는 CWMF(center weighted median filter), AMF(adaptive median filter) 등이 있으며, 이러한 필터들은 잡음 밀도가 높아짐에 따라 잡음제거 특성이 다소 미흡해지고 시각적인 오류를 나타낸다. 따라서 본 논문은 salt and pepper 잡음을 효과적으로 제거하기 위해, 4개의 영역으로 세분화된 국부마스크를 적용한 메디안 필터를 제안하였으며, 판단 기준으로 PSNR(peak signal to noise ratio)를 사용하였다.

• 비파괴검사학회지
• /
• 제26권3호
• /
• pp.153-161
• /
• 2006

A simulation program SIMULTSONIC is under development at CNDE to help determine and/or help optimize ultrasonic probe locations for inspection of complex components. SIMULTSONIC provides a ray-trace based assessment for immersion and contact modes of inspection. The code written in Visual C++ operating in Microsoft Windows environment provides an interactive user interface. In this paper, a description of the various features of SIMULTSONIC is given followed by examples illustrating the capability of SIMULTSONIC to deal with inspection of canonical objects such as pipes. In particular, the use of SIMULTSONIC in the inspection of very thin-walled pipes (with 450 urn wall thickness) is described. Ray trace based assessment was done using SIMULTSONIC to determine the standoff distance and the angle of oblique incidence for an immersion mode focused transducer. A 3-cycle Hanning window pulse was chosen for simulations. Experiments were carried out to validate the simulations. The A-scans and the associated B-Scan images obtained through simulations show good correlation with experimental results, both with the arrival time of the signal as well as with the signal amplitudes.

• 대한전자공학회논문지SP
• /
• 제38권1호
• /
• pp.43-53
• /
• 2001

JPEG의 부호화 기법에서 DCT의 단점인 블록효과를 제거하기 위해 웨이브릿 변환을 사용하였다. 기존의 JPEG과 호환성 유지하기 위하여, JPEG 부호화 기법과 동일한 기법을 사용할 수 있는 부호화기를 제안한다. 이를 위하여 웨이브릿 변환영역에서 각 대역의 신호를 8×8로 재구성하였고, 각 대역의 에러분석과 인간 시각특성을 고려하여 양자화 가중치를 구하여 양자화 하였다. 실험을 통하여 웨이브릿을 사용한 제안한 기법이 기존의 JPEG 보다 (Peak Signal to Noise Ratio), WMSE(Weighted Mean Square Error) 척도에서 다소 우수함을 보였다.

• 융합신호처리학회논문지
• /
• 제11권1호
• /
• pp.1-8
• /
• 2010

영상에 존재하는 잡음을 제거하는 방법은 공간영역과 변환영역에서 많은 연구가 되어 왔다. 초기에는 공간영역에서 저역통과필터를 많이 사용하였으나, 최근에는 변환영역에서 이산 웨이브릿 변환이 탁월한 에너지 집중도와 다분해능 성질에 기인하여 영상압축 뿐만 아니라 잡음제거에도 많이 사용되고 있다. 본 논문은 인간시각필터로 고려되는 Gabor 코사인과 사인 함수를 이용한 변환을 소프트 문턱치 기법으로 영상 잡음제거 응용에 적용하고자 한다. 기존 소프트 문턱치 기법을 이용하는 우수한 웨이브릿 변환과 PSNR 성능을 비교하고, 잡음 제거된 결과 영상을 시각적으로도 비교한다. 4가지 Gaussian 분포 잡음을 첨가한 여러 실제 영상의 실험으로부터 제안한 변환이 PSNR 성능에서 최대 1.18dB 우수하고, 시각적 인지에서도 분명한 차이를 보였다.