• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.3
• /
• pp.366-377
• /
• 2016

This paper presents a vision-based guidance method that allows a fixed-wing aircraft to orbit around a target at a given radius. The guidance method uses a simple formula that regulates a relative side-bearing angle estimated by a vision system. The global asymptotic stability of the associated guidance law is demonstrated, and a linear analysis is performed to facilitate the proper selection of the relevant control parameters. A flight experiment is presented to demonstrate the feasibility and performance of the proposed guidance method.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.314-319
• /
• 2002

The Automation and Control Group at the University of Brasilia is developing an automatic welding station based on an industrial robot and a controllable welding machine. Several techniques were applied in order to improve the quality of the welding joints. This paper deals with the implementation of a laser-based computer vision system to guide the robotic manipulator during the welding process. Currently the robot is taught to follow a prescribed trajectory which is recorded a repeated over and over relying on the repeatability specification from the robot manufacturer. The objective of the computer vision system is monitoring the actual trajectory followed by the welding torch and to evaluate deviations from the desired trajectory. The position errors then being transfer to a control algorithm in order to actuate the robotic manipulator and cancel the trajectory errors. The computer vision systems consists of a CCD camera attached to the welding torch, a laser emitting diode circuit, a PC computer-based frame grabber card, and a computer vision algorithm. The laser circuit establishes a sharp luminous reference line which images are captured through the video camera. The raw image data is then digitized and stored in the frame grabber card for further processing using specifically written algorithms. These image-processing algorithms give the actual welding path, the relative position between the pieces and the required corrections. Two case studies are considered: the first is the joining of two flat metal pieces; and the second is concerned with joining a cylindrical-shape piece to a flat surface. An implementation of this computer vision system using parallel computer processing is being studied.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.923-928
• /
• 1990

This paper describes the design and implementation of a real-time, high-precision vision system and its application to SMT(surface mounting technology) automation. The vision system employs a 32 bit MC68030 as a main processor, and consists of image acquisition unit. DSP56001 DSP based vision processor, and several algorithmically dedicated hardware modules. The image acquisition unit provides 512*480*8 bit image for high-precision vision tasks. The DSP vision processor and hardware modules, such as histogram extractor and feature extractor, are designed for a real-time excution of vision algorithms. Especially, the implementation of multi-processing architecture based on DSP vision processors allows us to employ more sophisticated and flexible vision algorithms for real-time operation. The developed vision system is combined with an Adept Robot system to form a complete SMD system. It has been found that the vision guided SMD assembly system is able to provide a satisfactory performance for SND automation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.7
• /
• pp.649-657
• /
• 2004

A windshield wiper system plays a key part in assurance of driver's safety at rainfall. However, because quantity of rain and snow vary irregularly according to time and velocity of automotive, a driver changes speed and operation period of a wiper from time to time in order to secure enough visual field in the traditional windshield wiper system. Because a manual operation of wiper distracts driver's sensitivity and causes inadvertent driving, this is becoming direct cause of traffic accident. Therefore, this paper presents the basic architecture of vision-based smart wiper system and the rain sensing algorithm that regulate speed and interval of wiper automatically according to quantity of rain or snow. Also, this paper introduces the fuzzy wiper control algorithm based on human's expertise, and evaluates performance of suggested algorithm in the simulator model. Especially the vision sensor can measure wider area relatively than the optical rain sensor, hence, this grasps rainfall state more exactly in case disturbance occurs.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.161-166
• /
• 2011

This paper addresses the vision based autonomous walking control system. To handle the obstacles which exist beyond the field of view(FOV), we used the 3d panoramic depth image. Moreover, to decide the avoidance direction and walking motion of a humanoid robot for the obstacle avoidance by itself, we proposed the vision based path planning using 3d panoramic depth image. In the vision based path planning, the path and walking motion are decided under environment condition such as the size of obstacle and available avoidance space. The vision based path planning is applied to a humanoid robot, URIA. The results from these evaluations show that the proposed method can be effectively applied to decide the avoidance direction and the walking motion of a practical humanoid robot.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.53-58
• /
• 2013

In this paper, we present a framework for collision avoidance of UGVs by vision-based control. On the image plane which is created by perspective camera rigidly attached to UAV hovering stationarily, image features of UGVs are to be controlled by our control framework so that they proceed to desired locations while avoiding collision. UGVs are assumed as unicycle wheeled mobile robots with nonholonomic constraint and they follow the image feature's movement on the ground plane with low-level controller. We used potential function method to guarantee collision prevention, and showed its stability. Simulation results are presented to validate capability and stability of the proposed framework.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.101-104
• /
• 1987

This paper shows the robot-vision system which consists of robot, vision system, single board computer and IBM-PC. IBM-PC based system has a great flexibility in expansion for a vision system interfacing. Easy human interfacing and great calculation ability are the benefits of this system. It was carried to interface between each component. The calibration between two coordinate systems is studied. The robot language for robot-vision system was written in "C" language. User also can write job program in "C" language in which the robot and vision related functions reside in the library.side in the library.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.610-615
• /
• 2005

Visual servoing is the fusion of results from many elemental areas including high-speed image processing, kinematics, dynamics, control theory, and real-time computing. It has much in common with research into active vision and structure from motion, but is quite different from the often described use of vision in hierarchical task-level robot control systems. We present a new approach to visual feedback control using image-based visual servoing with the stereo vision in this paper. In order to control the position and orientation of a robot with respect to an object, a new technique is proposed using a binocular stereo vision. The stereo vision enables us to calculate an exact image Jacobian not only at around a desired location but also at the other locations. The suggested technique can guide a robot manipulator to the desired location without giving such priori knowledge as the relative distance to the desired location or the model of an object even if the initial positioning error is large. This paper describes a model of stereo vision and how to generate feedback commands. The performance of the proposed visual servoing system is illustrated by the simulation and experimental results and compared with the case of conventional method for dual-arm robot made in Samsung Electronics Co., Ltd.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.240-247
• /
• 2013

This paper proposes an optimal three-dimensional coordinate implementation of the vision sensor using two CCD cameras. The PBVS (Position based visual servoing) is implemented using the positional information obtained from images. Stereo vision by PBVS method that has enhanced every frame using calibration parameters is effective in the distance calculation. The IBVS (Image based visual servoing) is also implemented using the difference between reference and obtained images. Stereo vision by IBVS method calculates the distance using rotation angle of motors that correspond eyes and neck without enhanced images. The PBVS method is compared with the IBVS method in terms of advantages, disadvantages, computing time, and performances. Finally, the IBVS method is applied for the dual arm manipulator on the mobile inverted pendulum. The autonomous mobile inverted pendulum is successfully demonstrated using the center of the manipulator's mass.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.770-775
• /
• 1987

In this paper, design and development experiences of a vision based robotic assembly system for electronic components are described. Specifically, the overall system consists of the following three subsystems each of which employs a 16 bit Preprocessor MC 68000 : supervisory controller, real-time vision system, and servo system. The three microprocessors are interconnected using the time shared common memory bus structure with hardwired bus arbitration scheme and operated as a master-slave type in which each slave is functionally fixed in view of software. With this system architecture, the followings are developed and implemented in this research; (i) the system programming language, called 'CLRC', for man-machine interface including the robot motion and vision primitives, (ii) real-time vision system using hardwired chain coder, (iii) the high-precision servo techniques for high speed de motors and high speed stepping motors. The proposed control system were implemented and tested in real-time successfully.