• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.123-127
• /
• 2006

정보기술의 발달 및 정보화의 촉진으로 인해 IT 시스템의 복잡도는 급격히 증가하고 있으며, 이에 따라 정보보호제품을 설치 운영함으로써 보안목적을 달성하는 과거의 보안정책은 한계에 도달하였다고 할 수 있다. 대부분의 IT 시스템 사용자들은 해당 IT 시스템의 보안대책에 대한 신뢰가 적절한 수준인지 판단할 수 있기를 원하고 있으며, 또한 이러한 수준이 지속적으로 유지되기를 바라고 있다. 보안수준을 유지하기 위해서는 지속적으로 해당 시스템의 보안수준을 확인하여야 하는데, 이러한 확인 및 판단의 근거를 제공하는 가장 기본적이고 전통적인 방법은 보안수준에 대한 평가이다. 본 논문에서는 IT 시스템의 보안수준을 유지하기 위한 보안수준관리의 필요성과, 이를 위해 보안수준 확인이 필요한 평가 대상항목을 식별하고자 한다.

• 복식문화연구
• /
• 제26권3호
• /
• pp.409-426
• /
• 2018

This study explores the effect of moral identity on attitude toward and purchase intention of upcycled fashion products by comparing purchasers and non-purchasers. Data from 127 purchasers and 307 non-purchasers collected through a survey was analyzed using descriptive statistics, confirmatory factor analysis, model invariance check, and multiple-group comparison tests using Amos 23.0. Results indicate consumers with purchase experiences of upcycled fashion products showed a higher level of moral identity (internalization and symbolization), positive attitude toward upcycled fashion products, and purchase intention than did consumers with no purchase experience. In model tests, internalization affected attitude toward purchasing upcycled fashion products, whereas symbolization affected purchase intention, regardless of purchase experience. The effect of symbolization on purchase intention was consistent with prior studies focusing on charity behaviors that are highly visible to others. These findings demonstrate that fashion products are visible and symbolic, so it should be carefully considered in ethical consumption studies. From these results, researchers may obtain insights on the process of how consumers apply moral identity to their purchase intention regarding upcycled fashion products. Likewise, marketers may enhance satisfaction of consumers with a high level of symbolization by putting special tags and logos that clearly highlight the products' upcycled nature.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.797-798
• /
• 2012

본 연구는 TFT-LCD모듈 기반으로 LED가시광통신용 영상신호 전달 시스템을 구현하고 디지털 신호에 대한 성능 분석을 하기 위한 연구이다. LED 조명은 빛을 이용해 데이터를 전송 가능하여 가시광통신을 할 수 있으며 LED의 재료와 구성 물질에 따라 다른 파장의 빛을 제어 할 수 있다. 이러한 LED 효율과 기존 TFT-LCD모듈에 LED 및 가시광센서를 접목한 송 수신기 센서를 구성하여 예측 및 통신 거리에 대해 나타내고 응용방법과 문제점 등에 대해서 확인하고자 한다. 또한 TFT-LCD의 기술과 차세대 기술인 LED 가시광통신을 접목함으로써, 유비쿼터스 등의 다양한 통신에 응용함으로써 기술적인 실현 가능성을 확인 하고자 한다.

• 복식문화연구
• /
• 제23권5호
• /
• pp.922-927
• /
• 2015

Checks are best considered as a (visible) sub-set of grids, and each check consists of two assemblies of parallel lines, one superimposed on the other at ninety degrees. In the conventional textile context, one assembly of parallel yarns is superimposed on another at ninety degrees. These parallel lines caused by the yarns remain visually apparent in the finished composition. Commonly, checks are considered simply as a variety of woven textile and Scottish clan tartans, or plaids (common terminology for tartans in the USA), famously display a checked feature, using differently colored yarns in woven-textile form. Often the sequence of colours and the numbers of yarns used is equal in both warp and weft directions. Where this is the case, the tartan may be considered to be 'balanced' or 'regular', with the component yarns creating square units repeating across and down the fabric. Thus in balanced tartans, lengthways components have identical ordering, colouring and measured width to those used widthways. Meanwhile an unbalanced check lacks one or more of these attributes. This paper explores further the nature of Scottish clan tartans, using data collected from collections of rare tartans held at ULITA - An Archive of International Textiles at the University of Leeds.

• 한국게임학회 논문지
• /
• 제1권1호
• /
• pp.55-60
• /
• 2001

With rapid development of graphic hardware, researches on Virtual Reality and 3D Games have received more attention than before. For more realistic 3D graphic scene, objects were to be presented with lots of polygons and the number of objects shown in a scene was remarkably increased. Therefore, for effective visualization of large polygon models like this, view-frustum culling method, that visualizes only objects shown in the screen, has been widely used. In general, the bounding boxes that include objects are generated firstly, and the boxes are intersected with view-frustum to check whether object is in the visible area or not. Recently, an algorithm that can check in-out test of objects using OpenGL's selection mode, which is originally used to select the objects in the screen, is suggested. This algorithm is fast because it can use hardware acceleration. In this study, by implementing and applying this algorithm to large polygon models, we showed the efficiency of OpenGL assisted View-Frustum Culling algorithm. If this algorithm is applied to 3D games that have to process more complicated characters and landscapes, performance improvement can be expected.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.124-129
• /
• 1998

The ultrasonic pulse measurements can be used to detect the development of cracks in concrete structures and to check deterioration due to frost or chemical action. An estimate of the depth of a visible crack at the surface can be obtained by measuring the transit times that across the crack for two different arrangements of the transducers placed on the surface. In this paper, the concrete cracks that artificially introduced crack of width 1, 2mm and depth 20, 40, 60, 80mm were measured by Tc-To, Direct and Indirect Method. The test results indicate that the Tc-To Method is the most useful in measuring crack of concrete structures. And the crack depth calculated by the Direct and Indirect Method is shown bigger than artificially introduced real crack depth.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.151-154
• /
• 2007

This paper describes the project for constructing a traceability system for producing using RFID antenna in 900MHz frequency band and the consideration. In this project we reviewed analysis of properties classified by production process and RFID system through each frequency band, and designed a single unit RFID reader including antenna. The developed antenna is optimized to a field condition and this paper will show the test results. Also, we designed a single unit RFID reader by adding a reader to a designed antenna and explained the rule of tag memory allocation. Lastly, after running the system we could calculate visible and invisible effects of operation results and check up a wide possibility of application for RFID.

• 상하수도학회지
• /
• 제26권3호
• /
• pp.343-354
• /
• 2012

A electro-foaming fusion wrap fitting for polyethylene sewer pipe was built and foaming mechanism has been studied. A foaming sheet, supporting sheet and clamping band is assembled into a all-in-one structured electro-foaming fusion wrap fitting. To specify foaming and fusion of electro-foaming fusion wrap for PE sewer pipe, series of fusion tests were performed in various conditions. A parallel plate compression test up to 50 % of inner diameter deflection has been performed to check integrity of fusion quality and it was found that there were no visible signs of crack in wrapped area of fitting. Also air tightness test based on KS M 3511-2 has been performed to evaluate perfectness of wrap fusion quality and we found there were no pressure drop up to 10 times higher value than KS standard regulation.

• 천문학회지
• /
• 제37권2호
• /
• pp.87-90
• /
• 2004

Spectrophotometry of the night sky over Mount Bohyun is presented for the nearly entire visible wavelengths of $3600{\~}$8600{\AA}$. The data was obtained under moonless clear sky in February 2004 with the 1.8-m telescope and the long slit spectrograph. The sky spectrum shows a number of strong emission lines originated from light pollution, especially due to high pressure sodium lamps. When compared to the night sky of Kitt Peak, our sky continuum is 1 to 2 magnitude brighter at all wavelengths, the worst being around the broad emission region near 6000${\AA}$. The night sky spectrum presented here with almost complete line identifications is a useful reference for arc-independent wavelength calibrations to check the gravity flexure of the spectrograph and the wavelength shift between FeNeArHe arc frames and science frames.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.181-186
• /
• 1999

Recently the machining technique have been progressed rapidly according to developments of the product technique in the machine tool and new tools. But in the case of vertical machine center(VMC), to become visible there is the appearance of bending because of the structural problems of x-axis guide way, and this would effect directly on accuracy of form of the straightness, parallelism and flatness. In this paper, I purpose to check the appearance of bending with the experiment and improve the working accuracy. Under the constant working conditions, the appearance of bending of x-axis guide way was measured to confirm the effectiveness of the compensation method in the vertical machine center(VMC). By using this method the results show that the accuracy of form of the straightness, parallelism and flatness could be reduced to 20% compared with ordinary method.