• 설비공학논문집
• /
• 제22권11호
• /
• pp.767-772
• /
• 2010

The incompressible viscous flow past a sphere under forced oscillation is numerically investigated at a Reynolds number of 300. The immersed boundary method is used to handle the sphere oscillating vertically to the streamwise direction. There are two important variables to characterize the oscillating state of a sphere. One is an oscillating amplitude normalized by the sphere diameter is set as a fixed number of 0.2. Another is the frequency ratio which is defined by $f_e/f_o$, where fe and fo are the excited frequency and the natural frequency of vortex shedding for the stationary sphere. In this study, three different frequency ratios of 0.8, 1.0 and 1.2 are considered. The results show a periodic flow with hairpin vortices shedding from upper and lower positions as well as vortical legs obliquely extended by oscillating motion of sphere. The enveloping vortical structure experience rupture twice in one period of oscillation. As the frequency of oscillation is increased, the vortical legs are getting shorter and eventually the hairpin vortices are much closer to the adjacent one.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1407-1414
• /
• 1988

본 연구에서는 저자들에 의해 이미 개발된 경계유선수정법에 의한 B-B 유동계 산을 통해 익열의 편차각을 계산하고 기존의 예측방법에 의한 결과와 비교 검토하여 압축성 및 3차원 비축대칭성의 효과를 검토하였다.

• Structural Engineering and Mechanics
• /
• 제59권1호
• /
• pp.153-186
• /
• 2016

This paper addresses temperature-dependent nonlinear vibration and instability of embedded functionally graded (FG) pipes conveying viscous fluid-nanoparticle mixture. The surrounding elastic medium is modeled by temperature-dependent orthotropic Pasternak medium. Reddy third-order shear deformation theory (RSDT) of cylindrical shells are developed using the strain-displacement relations of Donnell theory. The well known Navier-Stokes equation is used for obtaining the applied force of fluid to pipe. Based on energy method and Hamilton's principal, the governing equations are derived. Generalized differential quadrature method (GDQM) is applied for obtaining the frequency and critical fluid velocity of system. The effects of different parameters such as mode numbers, nonlinearity, fluid velocity, volume percent of nanoparticle in fluid, gradient index, elastic medium, boundary condition and temperature gradient are discussed. Numerical results indicate that with increasing the stiffness of elastic medium and decreasing volume percent of nanoparticle in fluid, the frequency and critical fluid velocity increase. The presented results indicate that the material in-homogeneity has a significant influence on the vibration and instability behaviors of the FG pipes and should therefore be considered in its optimum design. In addition, fluid velocity leads to divergence and flutter instabilities.

• Advances in aircraft and spacecraft science
• /
• 제3권3호
• /
• pp.331-349
• /
• 2016

Stiff and light fibre reinforced composites as used in air- and space-craft applications tend to high sound emission. Therefore, the damping properties are essential for the entire structural and acoustic engineering. Viscous damping is an established and reasonably linear model of the dissipation behaviour. Commonly, it is assumed to be isotropic and constant over all modes. For anisotropic materials it depends on the fibre orientation as well as the elastic and thermal material properties. To portray the orthogonal anisotropic behaviour, a model for unidirectional fibre reinforced plastics (frp) has been developed based on the classical laminate theory by ADAMS and BACON starting in 1973. Their approach includes three damping coefficients - for longitudinal damping in fibre direction, damping transversal to the fibres and shear based dissipation. The damping of a laminate is then accumulated layer wise including the anisotropic stiffness. So far, the model has been applied mainly to thermoset matrix materials. In this study, an experimental parameter estimation for different thermoplastic frp with angle ply and cross ply layups was carried out by measuring free vibrations of cantilever beams. The results show potential and limits of the ADAMS/BACON damping criterion. In addition, a possibility of modelling the anisotropic damping is shown. The implementation in standard FEA software is used to study the influence of boundary conditions on the damping properties and numerically estimate the radiated sound power of thin-walled frp parts.

• Earthquakes and Structures
• /
• 제13권2호
• /
• pp.119-130
• /
• 2017

This paper presents a numerical investigation on the seismic behavior of isolated bridges with supplemental viscous damping. Usually very large displacements make seismic isolation an unfeasible solution due to boundary conditions, especially in case of existing bridges or high risk seismic regions. First, a suggested optimal design procedure is introduced, then seismic performance of three real bridges with different isolation systems and damping levels is investigated. Each bridge is studied in four different configurations: simply supported (SSB), isolated with 10% damping (IB), isolated with 30% damping (LRB) and isolated with optimal supplemental damping ratio (IDB). Two of the case studies are investigated under spectrum compatible far-field ground motions, while the third one is subjected to near-fault strong motions. With respect to different design strategies proposed by other authors, results of the analysis demonstrated that an isolated bridge equipped with HDLRBs and a total equivalent damping ratio of 70% represents a very effective design solution. Thanks to confirmed effective performance in terms of base shear mitigation and displacement reduction under both far field and near fault ground motions, as well as for both simply supported and continuous bridges, the suggested control system provides robustness and reliability in terms of seismic performance also resulting cost effective.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권4호
• /
• pp.146-162
• /
• 2018

The unsteady problem of a rigid body impact onto a floating plate is studied. Both the plate and the water are at rest before impact. The plate motion is caused by the impact force transmitted to the plate through an elastic layer with viscous damping on the top of the plate. The hydrodynamic force is calculated by using the second-order model of plate impact by Iafrati and Korobkin (2011). The present study is concerned with the deceleration experienced by a rigid body during its collision with a floating object. The problem is studied also by a fully-nonlinear computational-fluid-dynamics method. The elastic layer is treated with a moving body-fitted grid, the impacting body with an immersed boundary method, and a discrete-element method is used for the contact-force model. The presence of the elastic layer between the impacting bod- ies may lead to multiple bouncing of them, if the bodies are relatively light, before their interaction is settled and they continue to penetrate together into the water. The present study is motivated by ship slamming in icy waters, and by the effect of ice conditions on conventional free-fall lifeboats.

• Computers and Concrete
• /
• 제30권5호
• /
• pp.323-337
• /
• 2022

This paper proposes a numerical model to simulate the rotational behavior of steel fiber in fresh cement-based materials in the presence of a magnetic field. The results indicate that as the aspect ratio of fiber increases, the required minimum magnetic field intensity to make fiber rotate in viscous fluid increases. The optimal magnetic field intensity is 0.03 T for aligning steel fiber in fresh cement-based materials to ensure that the applying time of the magnetic field can be conducted concurrently with the vibrating process to increase the aligning efficiency. The orientation factor of steel fiber in cement mortar can exceed 0.85 after aligning by 0.03 T of the uniform magnetic field. When the initial angle of the fiber to the magnetic field direction is less than 10°, the magnetic field less than 0.03 T cannot make the fiber overcome the yield stress of fluid to rotate. The coarse aggregate in steel fiber-reinforced concrete is detrimental to the rotation and alignment of the steel fiber. But the orientation factor of ASFRC under the 0.03T of the magnetic field can also exceed 0.8, while the orientation factor of SFRC without magnetic field application is around 0.6.

• 한국전산구조공학회논문집
• /
• 제34권6호
• /
• pp.427-435
• /
• 2021

환경시설물, 댐과 같은 유체를 저장하는 시설물을 대상으로 엄밀하게 지진 거동을 평가하기 위해서는 유체-구조물 상호작용을 고려한 해석이 필요하다. 특히, 댐-호소 계와 같이 상류 방향으로 무한 영역을 가지는 경우에는 이를 적절히 고려해야 할 필요가 있다. 본 연구에서는 댐-호소 계와 같은 반무한 유체 영역을 갖는 시스템을 대상으로 무한 영역의 파전파 해석 및 유체-구조물 상호작용 해석을 위한 실용적인 수치 모형을 제시하였다. 시간영역에 적용가능한 방법으로 정확하면서도 경계적인 해석이 가능하다. 무한 유체 영역에 대해서는 일반 acoustic finite element 대신 작은 개수의 mid-point integrated acoustic finite element를 적용하고 최종 경계에는 점성경계를 부과한다. 제안하는 방법의 유효성과 정확성을 검증하기 위해 강체 댐체를 가정한 반무한 호소계를 대상으로 적용하는 요소의 개수, 모델링 영역 크기 등을 매개변수로 해석해와 비교·검증하였다. 제안된 방법을 적용하여 댐-호소 계의 유체-구조물 상호작용을 부가질량을 사용하는 경우와 비교하였다.

• 한국항해항만학회지
• /
• 제46권6호
• /
• pp.491-500
• /
• 2022

큰 상부 형상을 가지는 FLNG (Liquefied Natural Gas Floating Production Storage Offloading Units, LNG FPSOs) 등의 해양구조물은 안정적인 운동성능 확보 및 계류라인 설계에 있어 정도 높은 풍하중 추정이 필수적이다. 따라서 본 연구의 목적은 FLNG의 풍하중 추정을 위한 수치해석 기법을 개발하는 데 있다. 특히, 본 연구에서 개발한 수치해석 기법은 저자의 이전연구를 FLNG에 맞추어 수정하였다. 풍하중 추정을 위한 수치해석은 15° 간격으로 0-360° 범위에서 균일 풍속 조건과 풍속 프로파일을 적용한 NPD (Norwegian Petroleum Directorate) 조건에서 수행하였다. 먼저, NPD 모델 풍속 프로파일 모델 개발을 위해 Sand-Grain Roughness 변화에 따른 풍속 프로파일을 분석하였다. 개발된 NPD 모델을 이용하여 3가지 풍향 (Head, Quartering & Beam)에 대한 메쉬 수렴성 시험을 수행하였다. 최종적으로 개발된 NPD 모델과 메쉬를 이용하여 균일한 풍속 조건과 NPD 조건에서의 풍하중을 평가하고 비교하였다. 본 연구에서는 RANS (Reynolds-averaged Navier-Stokes) 기반 Solver인 STAR-CCM+ (17.02)를 이용하였다. 결과를 요약하면, 풍속 프로파일을 적용한 NPD 모델에서의 풍하중은 균일 풍속(10m/s) 조건과 비교하여, Surge와 Yaw 하중이 최대 20.35 % 와 34.27% 증가하였다. 특히, 특정 일부 구간에서만 큰 하중의 차이를 보인 Sway (45°< α < 135°, 225°< α < 315°)와 Roll (60° < α < 135°, 225° < α < 270°)은 구간별 평균 증가율이 15.60%와 10.89% 수준으로 나타났다.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.671-680
• /
• 2007

본 연구의 최종 목적은 유체가 빠른 속도로 가해지는 물체의 경계면에서 흡입(suction) 혹은 방출(injection)을 통해 유체를 제어함으로 드래그(drag)를 감소하고자 하는 것이다. 그러나 유체는 대용량, 비선형성을 가지고 있어서 직접적인 해석은 물론, 최적화를 적용한다는 것은 매우 어려운 일이다. 이를 위해 우리는 새로운 알고리즘과 기법들을 개발하였다. 본 연구에서는 이 기법들에 대한 검증을 하고, 나아가 최적화 기법을 사용하여 드래그를 감소하기 위해 흡입량과 방출량을 구하였다. 그리고 이 흡입과 방출을 가할 수 있는 구멍의 수와 위치에 따른 변화를 알아보았다. 본 연구에서 개발된 알고리즘과 기법들을 사용하였을 경우, 기존에는 해결 할 수도 없었던 문제를 가능하게 만들었으며, 기존에 저자가 1차로 개발한 바 있는 방법에 비해서도 더욱 효과적이라는 것을 입증하였다. 그리고 드래그 감소라는 차원에서 본다면 흡입과 방출을 가할 수 있는 구멍의 숫자가 많을수록 효과가 높으나 그다지 많은 수를 필요로 하지 않는다는 것을 알게 되었으며, 구멍의 위치는 유체의 경계층이 분리되는 약간 아래가 가장 최적의 위치라는 것을 알게 되었다.