• Archives of design research
• /
• v.11 no.1
• /
• pp.291-302
• /
• 1998

This paper covers the development process of multimedia evaluation system, especially focused on customer satisfactory factors while customers navigating net-based Interactive multimedia system. Customers usually experience new level of interaction cased by newly developed web-based technology In ordinary multimedia system. However, if it gives customers satisfactory experience is a matter of question. To find out the relationship between customer satisfaction and interactivity factors exposed by multimedia system, a model has been developed which describes the structure of web-based multimedia system and its relation to customer satisfactory factors. Five different experiments, including 'semantic differential', 'focus group interview', and 'expert review', has been conducted and four customer satisfactory factors were identified. Those are 'customery value', 'structural perfectness', 'visual perfectness', and 'contemporaneity'. With these factors and newly delveoped evaluation system, 7 different web-site has been evaluated and analyzed at the end of this report.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.30-31
• /
• 2009

Early detection of schedule delay in field construction activities is vital to project management. It provides the opportunity to initiate remedial actions and increases the chance of controlling such overruns or minimizing their impacts. This entails project managers to design, implement, and maintain a systematic approach for progress monitoring to promptly identify, process and communicate discrepancies between actual and as-planned performances as early as possible. Despite importance, systematic implementation of progress monitoring is challenging: (1) Current progress monitoring is time-consuming as it needs extensive as-planned and as-built data collection; (2) The excessive amount of work required to be performed may cause human-errors and reduce the quality of manually collected data and since only an approximate visual inspection is usually performed, makes the collected data subjective; (3) Existing methods of progress monitoring are also non-systematic and may also create a time-lag between the time progress is reported and the time progress is actually accomplished; (4) Progress reports are visually complex, and do not reflect spatial aspects of construction; and (5) Current reporting methods increase the time required to describe and explain progress in coordination meetings and in turn could delay the decision making process. In summary, with current methods, it may be not be easy to understand the progress situation clearly and quickly. To overcome such inefficiencies, this research focuses on exploring application of unsorted daily progress photograph logs - available on any construction site - as well as IFC-based 4D models for progress monitoring. Our approach is based on computing, from the images themselves, the photographer's locations and orientations, along with a sparse 3D geometric representation of the as-built scene using daily progress photographs and superimposition of the reconstructed scene over the as-planned 4D model. Within such an environment, progress photographs are registered in the virtual as-planned environment, allowing a large unstructured collection of daily construction images to be interactively explored. In addition, sparse reconstructed scenes superimposed over 4D models allow site images to be geo-registered with the as-planned components and consequently, a location-based image processing technique to be implemented and progress data to be extracted automatically. The result of progress comparison study between as-planned and as-built performances can subsequently be visualized in the D4AR - 4D Augmented Reality - environment using a traffic light metaphor. In such an environment, project participants would be able to: 1) use the 4D as-planned model as a baseline for progress monitoring, compare it to daily construction photographs and study workspace logistics; 2) interactively and remotely explore registered construction photographs in a 3D environment; 3) analyze registered images and quantify as-built progress; 4) measure discrepancies between as-planned and as-built performances; and 5) visually represent progress discrepancies through superimposition of 4D as-planned models over progress photographs, make control decisions and effectively communicate those with project participants. We present our preliminary results on two ongoing construction projects and discuss implementation, perceived benefits and future potential enhancement of this new technology in construction, in all fronts of automatic data collection, processing and communication.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.245-250
• /
• 2023

Digital twin technology, which copies information from real space into virtual space, is being used in a variety of fields.Interest in digital twins is increasing, especially in advanced manufacturing fields such as Industry 4.0-based smart manufacturing. Operating a digital twin system generates a large amount of data, and the data generated has different characteristics depending on the technology field, so it is necessary to efficiently manage resources and use an optimized digital twin platform technology. Research on digital twin pipelines has continued, mainly in the advanced manufacturing field, but research on high-speed pipelines suitable for data in the plant field is still lacking. Therefore, in this paper, we propose a pipeline design method that is specialized for digital twin data in the plant field that is rapidly poured through Apache Kafka. The proposed model applies plant information on a Revit basis. and collect plant-specific data through Apache Kafka. Equipped with a lightweight CFD engine, it is possible to create a digital twin model that is more suitable for the plant field than existing digital twin technology for the manufacturing field.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.186-200
• /
• 2023

This study aims to improve the usability of the white cane, which is walking equipment that most local visually impaired people use and carry when going out, and to contribute to the prevention of safety accidents and the walking rights of visually impaired people by providing improvement and resolution measures for the problems identified. Also, this study is a study on the visually impaired, primarily targeting the 1st to 2nd degree visually impaired people, who cannot go out on their own without walking equipment such as a white cane, corresponding to 20% among approximately 250,000 blind and low vision people in the Korean population. In the study process, the concept has been developed from the user's point of view in order that the white cane becomes a real help in the walking step of the visually impaired and the improvement of usability of the white cane, the main walking equipment for the visually impaired, are done by problem identification through the Double Diamond Model of Design Thinking (Empathize → Define → Ideate → Prototype → Test (verify)). As a result of the investigation in the process of Empathy, a total of five issues was synthesized, including an increase in the proportion of the visually impaired people, an insufficient workforce situation to help all the visually impaired, an improvement and advancement of assistive devices essential for the visually impaired, problems of damage, illegal occupation, demolition, maintenance about braille blocks, making braille block paradigms for the visually impaired and for everyone. In Ideate and Prototype steps, situations derived from brainstorming were grouped and the relationship were made through the KJ method, and specific situations and major causes were organized to establish the direction of the concept. The derived solutions and major functions are defined in four categories, and representative situations requiring solutions and major functions are organized into two user scenarios. Ideas were visualized by arranging the virtual Persona and Customer Journey Map according to the situation and producing a prototype through 3D modeling. Finally, in the evaluation, the final concept derived is a device such a smart cane for guidance for the visually impaired as ① a smart cane emphasizing portability + ② compatibility with other electronic devices + ③ a product with safety and convenience.

• Journal of Korean Academy of Nursing
• /
• v.30 no.4
• /
• pp.1055-1065
• /
• 2000

The purpose of this study was to develop, through the integration of instructional theory, a Courseware and to investigate the effectiveness of a web-based computer assisted instruction(WBI) program for preventing drug abuse, a serious problem for youth problem. During the first stage of this study done "Drug Abuse Prevention" Courseware was developed based on, Gagn & Brigg's instructional design theory, Keller's ARCS theory and the CAI model of Hannafin & Peck. For the second stage, the courseware was used to provide education for students adolescents in drug abuse prevention. This study used an quasi-experimental, one-group pretest-posttest design with a convenience sample of 36 male high school students who were at one high school located in Seoul. Data were collected using self-reported questionnaires which included a learning achievement tool, the Keller's IMMS (Instructional Material Motivation Survey), on attitudes to drug use, and on responses to the WBI instruction. Prior to the experiment, the "drug abuse prevention" learning method and the procedures of the study were explained to the students, and then the learning achievement of the subjects was measured as a pretest. The students were then given 2 weeks WBI utilizing the courseware. A post-test which included the pre-test learning achievement questionnaire and a survey of learning motivation and attitudes toward drug were given two weeks after the education was completed. The data analysis was done using SPSS/PC. Paired t-test was used to analyze the differences between the pre-test and post-test scores for learning achievement. The results of the analysis are as follows: There were significant differences in learning achievement between the pre-test and post-test(t=-18.62, p=0.000). The hypothesis, that learning achievement will be higher, after the class has used the courseware, than before was supported. The scores for learning motivation and attitudes toward drugs were also higher than the results of existing studies. In conclusion, this study suggests that WBI is an effective learning method in the prevention of drug abuse for adolescents as it can be used for self-learning and repeated learning as assisted instruction. Recommendation would be given that further research needs to be develped in the courseware by cognitive learning style and by multimedia courseware and virtual reality system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.340-347
• /
• 2016

Since the 1970s, manufacturing has been one of the key driving forces that has led to Korea's economic growth. However, this growth rate has been reduced significantly since the 2000s, and shows that revenues and employment are steadily decreasing. In addition, while manufacturing investment in Korea has dropped sharply, the United States, Germany, Japan, and other major countries have increased investment in manufacturing. These countries have promoted manufacturing innovation strategies that include the convergence of information and communications technologies (ICT) and manufacturing. For manufacturing innovation, it is important for time and cost savings required for product development to be achieved by changes in the production process, especially product design. Modeling and simulation (M&S) is a process that replaces physical product design, mockup making, and testing, with virtual product creation (modeling) and engineering analysis (simulation). In this paper, we analyze the economic ripple effect of supercomputing M&S using an input-output model technique based on the input-output tables published by the Bank of Korea. When we set the M&S budget (about US$16 million for the last 10 years) of the Korea Institute of Science and Technology Information (KISTI) as input coefficients, the effect on production inducement, value-added inducement, and employment inducement was analyzed to be US$24 million, US$13.4 million, and 267, respectively.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.238-243
• /
• 2011

In this study, we attempted a structural analysis in order to design a balloon type extracorporeal membrane oxygenator that can induce blood flow without using blood pumps for the purpose of complementing the weakness in the existing extracorporeal membrane oxygenator. To analyze the flow characteristic of the blood flow within the virtual model of extracorporeal membrane oxygenator, computational fluid dynamics(CFD) modeling method was used. The operating principle of this system is to make the surface of the extracorporeal membrane oxygenator keep contracting and dilating regularly by applying pressure load using a balloon, and the 'ime Function Value'that changes according to the time was applied by calculating a half cycle of sine waveform and a cycle of sine.waveform Under the assumption that the uni-directional blood flow could be induced if the balloon type extracorporeal membrane oxygenator was designed as per the method described above, we conducted a structural analysis accordingly. We measured and analyzed the velocity and pressure of blood flow at both inlet and outlet of the extracorporeal membrane oxygenator through CFD simulation. As a result of the modeling, it was confirmed that there was a flow in accord with the direction of the blood by the contraction/dilation. With CFD simulation, the characteristics of blood flow can be predicted in advance, so it is judged that this will be able to provide the most optimized design in producing an extracorporeal membrane oxygenator.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.782-792
• /
• 1999

효과적인 ATM 망의 관리는 연결 지향 환경, 다양한 서비스 등급, 대규모 트래픽, 가상 망 구성 그리고 여러가지 트래픽 유형 등과 같은 다양한 ATM 특성을 다룰 수 있어야만 한다. 이를 위해 ATM 포럼에서는 ATM 장치, 사설망, 공중망 및 그들간의 상호작용을 지원하기 위한 ATM 망 관리 참조 모델을 정의하였으며, 그 중 하나가 서로 다른 판매자로부터의 ATM 장비들간의 상호동작성을 보장하기 위해 SNMP 기반 망 관리 프로토콜을 통해 상호 연결된 인터페이스를 관리할 수 있도록 정의된 통합 지역 관리 인터페이스(ILMI) 프로토콜이다. ILMI의 목적은 두 인접한 ATM 장치로 하여금 그들 간에 공통의 ATM 링크에 대한 동작 파라메타를 자동적으로 구성할 수 있도록 함으로서, 관리자에 의해 수동 구성이 아닌 ATM 장치 상호간의 플러그 앤 플러그 기능을 지원하는데 있다. 본 논문에서는 이러한 ILMI 기술을 바탕으로 공중망 ATM 교환기에 연결된 가입자의 물리 인터페이스, ATM 계층 인터페이스, VPC 및 VCC의 구성 및 상태 정보를 효율적으로 관리하며, 가입자 시스템의 ATM 주소를 자동으로 등록, 관리할 수 있도록 하는 가입자 인터페이스 관리 시스템(SIMS)을 설계하고, 구현하였다. Abstract An effective ATM management must address the various features of ATM such as connection-oriented environment, varying class of service, large scale traffic, virtual network configurations and, and multiple traffic types. For this, ATM network management reference model defined by ATM Forum describes the various types of network management needed to support ATM devices, private networks, public networks, and the interaction between them. One of these types is Integrated Local Management Interface (ILMI) defined to manage interconnected interface through SNMP-based network management protocol for ensuring the interoperability of ATM devices from different vendors. The purpose of ILMI is to enable two adjacent ATM devices to automatically configure the operation parameters of the common ATM link between them and then to provide a Plug and Plug function to any ATM devices with not a passive configuration by manager but a automatic configuration. This paper design and implement a Subscriber Interface Management System (SIMS) which provide automatic registration and management of ATM address of subscriber system and efficiently manages physical interface of subscriber who is connected to public ATM switch, ATM layer interface, configuration information and status information of VPC and VCC.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.41-59
• /
• 2005

Mobile games have emerged as the most innovative entertainment technology adding new revenue streams, taking advantage of the potential of wireless consumer applications and service offerings. Mobile games, like any other types of computer game, offer a unique value for users in providing an exciting digital experience in virtual worlds. Players can become empowered through the development of new characters and strategies within games to achieve rewarding successes against the computers and other players. In this paper, we attempt to investigate the factors influencing the usage and acceptance of the mobile games in Korea, based on the extended version of the Technology Acceptance Model(TAM). Based on data collected from survey, we show that perceived usefulness is the major determinant for users to play mobile games. Two factors, including perceived enjoyment and self-expressiveness, are empirically shown to determine perceived usefulness. In addition, perceived ease of use, rewards, operational quality of device, and design/story have been showed to significantly and directly affect perceived enjoyment. It was also confirmed that self-efficacy and operational quality of device are the antecedents of perceived ease of use. Based upon the statistical results, some useful guidelines for game development and market penetration strategies are also provided.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.1 s.11
• /
• pp.11-17
• /
• 1998

Recently, 3D GIS based on 3D geo-processing methodology and Internet environment are emerging issues in GIS fields. To design and implement 3D GIS, the strategic linkage of Java and VRML is first regarded: 3D feature format definition in the passion of conventional GIS including aspatial attributes, 3B feature indexing, 3D analytical operators such as selection, buffering, and Near, Metric operation such as distance measurement and statistical description, and 3D visualization. In 3D feature format definition, the following aspects are implemented: spatial information for 3D primitives extended from 2D primitives, multimedia data, object texture or color of VRML specification. DXF-format GIS layers with additional attributes are converted to 3D feature format and imported into this system. While, 3D analytical operators are realized in the form of 3D buffering with respect to user-defined point, line, polygon, and 3D objects, and 3D Near functions; furthermore, 'Lantern operator' is newly introduced in this 3D GIS. Because this system is implemented by Java applet, any client with Java-enable browser including VRML browser plug-in can utilize the new style of 3D GIS function in the virtual space. Conclusively, we present prototype of WWW-based 3D GIS, and this approach will be contribute to development of core modules on the stage of concept establishment and of real application model in future.