• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.257-257
• /
• 2006

We chose three synthetic polymers, poly(propylene carbonate) (PPC), poly(vinylidene fluoride-co-hexafluoropropylene) (PVFHFP), and $Nafion^{(R)}$ that reveal different chemical and physical characteristics, and investigate their biocompatibilities to five different bacteria (that are most notorious for opportunistic and iatrogenic infections) and a human cell (HEp-2). The bacteria chosen in this study found to adhere onto the PPC and Nafion films but not to adhere on the PVFHFP film. On the other hand, both PVFHFP and Nafion films revealed good compatibility to HEp-2 and allowed the growth of the HEp-2 on the film surface but PPC showed poor compatibility to HEp-2. All results will be discussed with taking into account the surface characteristics of the polymers.

• 한국진공학회지
• /
• 제20권4호
• /
• pp.276-279
• /
• 2011

약밀려남/잡아당김/급냉각의 연속적인 압출 공정을 이용하여 대면적 불화 고분자 막을 제작하였다. 제안한 방법으로 형성된 불화 고분자 박막은 $C_i=2.9\;nF/cm^2$의 전기용량밀도가 측정되었고, 1kHz에서의 ${\varepsilon}_r$=56의 높은 유전상수를 나타내었다. $1.5406{\AA}$의 파장에서 Bruker AXS X-ray 회절분석기를 통해 $18.0^{\circ}$에서 최고점을 나타내어 전기변형 성능에 적합한 ${\beta}$ 상태를 확인하였다. 본 연구는 넓은 면적의 인공근육에 응용 가능한 전기변형 불화고분자막의 새로운 박막 형성 기술로 이용될 수 있다.

• 멤브레인
• /
• 제27권4호
• /
• pp.350-357
• /
• 2017

본 연구는 열유도 상분리법(thermally induced phase separation, TIPS)을 사용하여, 수처리 분리막에 적용하기 위해, 응고조의 온도 및 열용량의 변화에 따른 분리막의 모폴로지 변화를 관찰하였다. 분리막을 제조하기 위한 소재로는 기계적 물성과 내화학성이 우수한 poly(vinylidene fluoride)(PVDF)와 실리카를 이용하였고, 희석제로는 dioctyl phthalate (DOP), dibutyl phthalate (DBP)를 사용하였다. 다양한 응고액의 열용량 변화에 따른 구조 변화 관찰을 위하여 SEM 이미지를 관찰하였다. 열용량이 증가할수록 PVDF의 결정화 속도가 느려져 큰 기공을 나타내며 열용량이 작을수록 결정화 속도가 증가하여 작은 기공이 생기는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.712-715
• /
• 2016

In this paper, we fabricated flexible CNT/PVDF piezoelectric composite device by introducing CNTs (carbon nanotubes) into PVDF (poly-vinylidene fluoride) solution using spray coating technique. Flexible PEDOT:PSS conducting polymer was used as electrodes. We tried to improve the piezoelectric performance from the CNT/PVDF composite film by increasing the portion of the ${\beta}$-phase PVDF in the film. We confirmed the structural conformation of the CNT/PVDF composite film as a function of CNT concentration by using FT-IR (fourier transform infra-red). As increasing CNT concentration, portion of the ${\beta}$-phase PVDF and resulting piezoelectric performance increased in the CNT/PVDF composite film. We found that CNTs introduced were played as seeds for formation of the ${\beta}$-phase PVDF in the CNT/PVDF composite film and resulting improvement of the piezoelectric performance.

• Composites Research
• /
• 제31권5호
• /
• pp.267-275
• /
• 2018

A facile method for the preparation of nitrogen-doped microporous carbon via the pyrolysis of poly(vinylidene fluoride) (PVDF) using polypyrrole (PPy) as a selective nitrogen source was developed. A PVDF/PPy-800 sample (carbonized at $800^{\circ}C$) with a 1:0.5 ratio of PVDF and PPy exhibited the highest micropore volume. The activated microporous carbon materials obtained from PVDF/PPy-800 prepared at $800^{\circ}C$ with KOH possessed a large specific surface area and narrow pore-size distribution. They were characterized using $N_2$ adsorption at 77 K and argon (Ar) adsorption at 87 K, which allowed for the characterization of the narrow microporosity of the prepared materials due to the absence of interactions between Ar and the sample surface. In addition, the activated microporous carbon material with a KOH/carbon ratio of 2:1 was found to exhibit the largest specific surface area ($1296m^2g^{-1}$ in $N_2$ at 77 K) and microporosity, and a high specific capacitance ($122.8F\;g^{-1}$).

• Carbon letters
• /
• 제15권2호
• /
• pp.117-124
• /
• 2014

Conductive polymer composites (CPCs) consist of a polymeric matrix and a conductive filler, for example, carbon black, carbon fibers, graphite or carbon nanotubes (CNTs). The critical amount of the electrically conductive filler necessary to build up a continuous conductive network, and accordingly, to make the material conductive; is referred to as the percolation threshold. From technical and economical viewpoints, it is desirable to decrease the conductive-filler percolation-threshold as much as possible. In this study, we investigated the effect of polymer/conductive-filler interactions, as well as the processing and morphological development of low-percolation-threshold (${\Phi}c$) conductive-polymer composites. The aim of the study was to produce conductive composites containing less multi-walled CNTs (MWCNTs) than required for pure polypropylene (PP) through two approaches: one using various mixing methods and the other using immiscible polymer blends. Variants of the conductive PP composite filled with MWCNT was prepared by dry mixing, melt mixing, mechanofusion, and compression molding. The percolation threshold (${\Phi}c$) of the MWCNT-PP composites was most successfully lowered using the mechanofusion process than with any other mixing method (2-5 wt%). The mechanofusion process was found to enhance formation of a percolation network structure, and to ensure a more uniform state of dispersion in the CPCs. The immiscible-polymer blends were prepared by melt mixing (internal mixer) poly(vinylidene fluoride) (PVDF, PP/PVDF, volume ratio 1:1) filled with MWCNT.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.188-194
• /
• 2003

Phase behavior and spinodal phase separation kinetics in binary blends of a random copolymer of vinylidene fluoride and trifluoroethylene (75/25) [P(VDF/TrFE)] and poly(l,4-butylene adipate) (PBA) have been investigated by means of optical microscopic observation and time-resolved light scattering. The blends exhibited a typical lower critical solution temperature (LCST)∼${34}^{\circ}C$ above the melting temperature of the P(VDF/TrFE) crystals over the entire blend composition range. P(VDF/TrFE) and PBA were totally miscible in the temperature gap between the melting point of P(VDF/TrFE) and the LCST. Temperature jump experiments of the 3/7 P(VDF/TrFE)/PBA blend were carried out on a light-scattering apparatus from a single-phase melt state (${180}^{\circ}C$) to a two-phase region (205∼${215}^{\circ}C$). Since the late stage of spinodal decomposition (SD) is prevalent in the 3/7 blend, SD was analyzed using a power law scheme. Self-similarity was preserved well in the late stage of SD in the 3/7 blend.

• Membrane and Water Treatment
• /
• 제7권6호
• /
• pp.539-553
• /
• 2016

As a novel hydrophobic monomer, polytetrahydrofuran diacrylate (PTMGDA) was synthesized by the esterification reaction between polyethylene tetrahydrofuran (PTMG) and acryloyl chloride (AC). In situ free radical polymerization reaction method was utilized to fabricate poly (vinylidene fluoride) (PVDF)-PTMGDA-poly(ethylene oxide) dimethacrylate (PEGMA) ulrafiltration (UF) membranes. The performances of PVDF-PTMGDA-PEGMA UF membranes in terms of morphologies, mechanical properties, separation properties and hydrophilicities were investigated. The introduction of the PTMGDA-PEGMA dopants not only increased the membranes' pure water flux, but also improved their mechanical properties and the dynamic contact angles. The addition of the PTMGDA/PEGMA dopants led to the formation of the finger-like structure in the membrane bulk. With the increase concentration of PTMGDA/PEGMA dopants, the porosity and the mean effective pore size increased. Those performances were coincide with the physicochemical properties of the casting solutions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.277.2-277.2
• /
• 2014

For next-generation electronic applications, human-machine interface devices have recently been demonstrated such as the wearable computer as well as the electronic skin (e-skin). For integration of those systems, it is essential to develop many kinds of components including displays, energy generators and sensors. In particular, flexible sensing devices to detect some stimuli like strain, pressure, light, temperature, gase and humidity have been investigated for last few decades. Among many condidates, a pressure sensing device based on organic field-effect transistors (OFETs) is one of interesting structure in flexible touch displays, bio-monitoring and e-skin because of their flexibility. In this study, we have investigated a flexible e-skin based on highly sensitive, pressure-responsive OFETs using microstructured ferroelectric gate dielectrics, which simulates both rapidly adapting (RA) and slowly adatping (SA) mechanoreceptors in human skin. In SA-type static pressure, furthermore, we also demonstrate that the FET array can detect thermal stimuli for thermoreception through decoupling of the input signals from simultaneously applied pressure. The microstructured highly crystalline poly(vinylidene fluoride-trifluoroethylene) possessing piezoelectric-pyroelectric properties in OFETs allowed monitoring RA- and SA-mode responses in dyanamic and static pressurizing conditions, which enables to apply the e-skin to bio-monitoring of human and robotics.

• 한국유체기계학회 논문집
• /
• 제17권2호
• /
• pp.30-34
• /
• 2014

Membrane distillation (MD) is a thermal driven separation process in which separation a hydrophobic membrane is a barrier for the liquid phase, letting the vapor phase pass through the membrane pores. Therefore, a porous and hydrophobic membrane should be used in membrane distillation. MD cannot work if water penetrates into the pores of the membrane (membrane wetting). Accordingly, it is necessary to prevent wetting of MD membranes and to remove water inside the pores of the wetted membranes if possible. In this context, our study aimed to develop methods to recover wetted membranes in MD processes. Poly-vinylidene fluoride (PVDF) membranes were used in this study. A laboratory-scale direct contact MD (DCMD) system was used to examine the effect of operating parameters on wetting. For dewetting the wetted membranes, specific techniques including the use of high temperature air were applied. The performances of the membranes before and after dewetting were compared in terms of flux, salt rejection and liquid entry pressure(LEP). The surface morphology of dewetted membrane was confirmed by scanning electron microscope (SEM).