• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.111-116
• /
• 2012

In this paper, we fabricate a WiFi based video transmitting equipment and establish a video transmitting system for realtime transmitting of accident scene on expressways. The transmitting equipment is based on the H.264 video codec and embed WiFi module. The transmitting equipment can transmit video and also meta data such as location positioning through the Wibro network using a Wibro terminal. From test results, it is clear that high density videos were transmitted while the vehicle carried by the video equipment was traveling with velocity of 80 km/h.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.681-687
• /
• 2017

This paper presents about an implementation of Video Transmitting and Receiving System(VTRS) for acquiring test data. The VTRS consists of two parts. The first is Transmitter Unit(TU) that is installed on a missile to acquire various kinds of data and transmit the data to the ground through RF signals. The second is Receiver Unit(RU) that receives the transmitted RF signals and reconstruct those to the original data. To gather a high speed data reliably and securely on the ground, the TU is designed by considering data transfer scheme, data compression, modulation method, encryption technic, link budget, and antenna radiation pattern. Further, a placement method of multiple receiving stations is suggested. The VTRS has been tested on a field to check the link margins and maximum receiving distance in a real environment. Finally, the VTRS is applied to a missile flight test and gathered high speed data reliably.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1285-1294
• /
• 1999

In this paper we consider the performance of TCP video traffic over ABR with Long-Range Dependent VBR traffic. As compressed coded video traffics are increasing rapidly over Internet, lots of studies are being done for transmitting those traffics efficiently using limited network resources. We consider here the transmitting video service over ABR service in ATM networks, especially satellite networks. CBR or VBR services are suggested in transmitting the video traffic in ATM Forum TM 4.0. But ABR service connection, which is considered as appropriate service for data traffic, can be established with a small amount of bandwidth, MCR (Minimum cell rate). Furthermore ABR service can control the source's transmitting rate using feedback mechanism. Using this feature ABR service can be used in some applications which can control their quality of services corresponding to network loads. Compressed video sources with MPEG-2 are used for Long-Range Dependent VBR traffic here. We model the compressed video source to resemble the MPEG-2 transport streams. These compressed video traffic streams are consisted of three different frames, I-frame, P-frame, and B-frame. So when a network are overloaded, we can control the quality of service using this traffic features. TCP Traffics over ABR need large buffers in ATM switch to satisfy their QoS with background VBR traffics, which have high deviations in bandwidth. Furthermore satellite ATM networks with large feedback delay need large buffers corresponding RTT delay. The performance comparisons among EFCI and ER switch (ERICA+) switches in the network circumstances described above were shown in this paper. We also considered the case with ON-OFF VBR traffics.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.3
• /
• pp.328-335
• /
• 2002

When we want to transfer video streaming data through computer networks, we will have to be allocated a larger bandwidth compared to a general application. In general, it causes a serious network overload inevitably due to the limited bandwidth. In this paper, in order to resolve the problem, we haute taken a method for transmitting video streaming data using RTP and RTCP. With RR(Receiver Report) packet in RTCP we will test it to check whether the traffic in a network has occurred or not. If it happened, we haute tried to reduce the overall network traffic by dynamically changing the quantization factor of the Motion JPEG that is one of the encoding styles in JMF. When the ratio of the average of transmission for each session to the average of overall transmission is greater than 7%, we should adjust the amount of data to be transmitted for each session to reach the session mean values. The experimental results show that the proposed method taken here reduces the overload effectively and therefore improves the efficiency for transmitting video streaming data.

• Journal of Internet Computing and Services
• /
• v.15 no.6
• /
• pp.1-8
• /
• 2014

As the e-learning spreads widely and demands on the internet video service, transmitting video data for many users over the Internet becomes popular. To satisfy this needs, the traditional approach uses a tree structure that uses the video server as the root node. However, this approach has the danger of stopping the video service even when one of the nodes along the path has a some problem. In this paper, we propose a video-on-demand service that uses multiple paths. We add new paths for backup and speed up for transmitting the video data. We show by simulation experiments that our approach provides a high-quality of video service.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.6
• /
• pp.296-301
• /
• 2006

Even though the emergency telecommunication make possible that specialist offers medical care over emergency cases in moving vehicle, we still have many problems in transmitting the image or video of patient over several wireless networks. To alleviate the effect of channel errors on compressed video bit-stream, this paper analyzed the error resilient features of JPEG2000 standard and measured the quality of transmission over noisy wireless channel, CDMA2000 1xEV-DO networks, compared to the features of error resilient tool of MPEG-4. We also proposed the optimum solution of transmitting images over real 3G network using JPEG2000 error resilient tool.

• Journal of Broadcast Engineering
• /
• v.25 no.7
• /
• pp.1052-1062
• /
• 2020

As the market demand for immersive media increases, an efficient streaming method is required in consideration of network conditions while maintaining the user's immersive experience. Accordingly, transmitting a viewport with relatively high-quality, such as tile-based streaming, is mainly used. But there still remains a lot of technical challenges, such as quickly providing a new viewport in high-quality according to the gaze. To solve the aforementioned problem, in this paper, we propose a method of configuring and transmitting a supplemental tile set through the predicted direction, and a range of stable utilization of the transmitted supplemental tile set.

• Journal of Korea Multimedia Society
• /
• v.17 no.9
• /
• pp.1084-1091
• /
• 2014

When demand for transmitting multimedia data increases, network congestion is more likely to occur and users will suffer high loss rate as well as high delay. In order to enhance quality-of-service (QoS) of video multicasting, we need to raise transmission reliability and reduce end-to-end delay. This paper proposes a routing mechanism for a OpenFlow-based small-scale network in order to multicast video reliably with low delay. In our method, multipath routing will be applied to Multiple Description (MD) Coded video to exploit its multi-description property. Through performance evaluation, our method shows improvement on loss rate, delay and video distortion.

• ETRI Journal
• /
• v.26 no.4
• /
• pp.332-343
• /
• 2004

One of the recent and most significant technical properties can be expressed as "digital convergence," which is helping lead the technical paradigm into a ubiquitous environment. As an initial trial of realizing a ubiquitous environment, the convergence between broadcasting and telecommunication fields is now on the way, where it is required to develop a scalable video coding scheme for one-source and multi-use media. Traditional scalable video coding schemes have, however, limitations for higher stable picture quality especially on the region of interest. Therefore, this paper introduces an adaptive scanning method especially designed for a higher regional-stable picture quality under a ubiquitous video coding environment, which can improve the subjective quality of the decoded video by most-preferentially encoding, transmitting, and decoding the top-priority image information of the region of interest. Thus, the video can be more clearly visible to users. From various simulation results, the proposed scanning method in this paper can achieve an improved subjective picture quality far better than the widely used raster scan order in conventional video coding schemes, especially on the region of interest, and without a significant loss of quality in the left-over region.

• Journal of Broadcast Engineering
• /
• v.25 no.7
• /
• pp.1073-1080
• /
• 2020

360-degree video streaming technologies have been widely developed to provide immersive virtual reality (VR) experiences. However, high computational power and bandwidth are required to transmit and render high-quality 360-degree video through a head-mounted display (HMD). One way to overcome this problem is by transmitting high-quality viewport areas. This paper therefore proposes a motion-constrained tile set (MCTS)-based tile extractor for versatile video coding (VVC). The proposed extractor extracts high-quality viewport tiles, which are simulcasted with low-quality whole video to respond to unexpected movements by the user. The experimental results demonstrate a savings of 24.81% in the bjøntegaard delta rate (BD-rate) saving for the luma peak signal-to-noise ratio (PSNR) compared to the rate obtained using a VVC anchor without tiled streaming.