• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.339-345
• /
• 2016

While a game market has been growing consistently world widely, a market of arcade or video game has been detained. In this stagnation, the latest one in 2015, "Super Mario Maker" of Mario series that's been running in good for 30 years, the notable sale and growth of which are extraordinary. As for a study in customizing, a literature of game customizing and studies that are foregone were mostly handling contents about a game character. In the survey that's done in this thesis about knowledge and needs in customizinge game users have, it was shown they want to customize sides of a rule and a character. I analyzed what the main factors are in this game which uses a main concept of customizing and the reason for high profits and popularity. As a result of the analysis, four features, possibility to customize a game rule, share data among users, collaboration in marketing with NFC figure characters, offering updates with sustained and new customizing features were found out. I am certain a game customizing will be helping to meet users and be used for various industries without limit of existing character.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.48-61
• /
• 2020

The objective of this study is to estimate traffic capacity based on the heavy-vehicle ratio in a two-lane freeway work zone where one lane is blocked by construction. For this, closed circuit television (CCTV) video data of the freeway work zone was collected, and the congestion at an upstream point was observed. The traffic volume at a downstream point was analyzed after a bottleneck was created by the blockage due to the upstream congestion. A distribution model was estimated using observed-time headway, and the road capacity was analyzed using a goodness-of-fit test. Through this process, the general capacity and an equation for capacity based on the heavy-vehicle ratio passing through the work zone were presented. Capacity was estimated to be 1,181~1,422 passenger cars per hour per lane (pcphpl) at Yeongdong, and 1,475~1,589pcphpl at Jungbu Naeryuk. As the ratio of heavy vehicles increased, capacity gradually decreased. These findings can contribute to the proper capacity estimation and efficient traffic operation and management for two-lane freeway work zones that block one lane due to a work zone.

• Journal of Science Education
• /
• v.44 no.2
• /
• pp.240-258
• /
• 2020

The advances in science technology brought about a new form of learning called flipped-learning: a combination of on-line and off-line learning. A flipped learning is a form of blended learning which has become quite popular, nowadays, in the field of education. Despite the emphasis on the importance of medical humanities in medical education program, there are no effective teaching and learning models to realize the purpose of medical humanities education. This study explores the possibility of flipped-learning to apply medical humanities classes. The class was designed based on the ADDIE model consisting of five stages, analysis - design - development - execution - evaluation. In order to do 'flipped-learning,' the instructor reconstructs the purpose of medical humanities education, instructional purpose and content, and analyzed learner. The contents of the medical humanities class were structured considering the purpose of the introduction to the medical humanities in the medical education program and the competencies that medical personnel should have in the developed health care environment. The instructor produces a video of the lecture and makes it possible to use LMS (Learning Management System) before and after classes, and conducts discussion activities so that learner-learner and learner-teacher interaction could actively occur during the class. The result of applying medical humanities lesson as flipped learning is as follows: First, it can realize the essence of medical humanities education. Second, it contributes to strengthening the competencies of health care provider. Third, flip learning can be used as a new teaching strategy for medical humanities education. The result of this study is expected to suggest new ways of introduction to teaching method in the traditional medical humanities class and contribute to the practice of designing and doing flipped learning of medical humanities class in the future.

• Environmental and Resource Economics Review
• /
• v.18 no.4
• /
• pp.653-693
• /
• 2009

Using the Korean environmental input output analysis, this paper provides the emission intensities of the chemicals, especially, the toxic and carcinogenic substances, by linking the structure of demand, and the policy mix to abate these substances emissions. Acording to the results, Industries with the highest total emission intensities(TEI) of toxic substances are ranked : Printing and reproduction of recorded media(21), Other transportation equipment(26), Pulp and paper(11), Leather and fur products(9), Fiber yarn and fabrics(7). And the highest TEI of carcinogenic substances are Wood and wooden products(10), Motor vehicles and parts(25), Plastic and rubber products(15), Audio, video and communications equipment(23), etc.. The economic factors of changing these emissions are emission intensities and final demands. The effective combinations of policy instruments to abate these emissions are varied by the industries and substances. For example, Government need to execute the effective TEI management in the Fiber yarn and fabrics(7) sector, and, in furniture(27) sector, the reduction of final demand is more effective.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.199-212
• /
• 1998

The ultimate goal of this study can be summed up as follows: First, the utility of Time-Lapse that observes and records people's behavior will be shown and its merits and demerits will be discussed through comparing with other data-collecting methods such as the naked- eye observation, and the specific way in which Time-Lapse can be put to use will be suggested. Second, analysis of use behavior boserved in the plaza of Chungryangri station by Time-Lapse will be made, on the basis of which suggestions will be made concerning planing, designing, layout, and management of the station plaza. Time-Lapse can observe and records the plaza of Chungryangri Staton through 6 different ways of recording in Time-Lapse: 30 seconds, every minute, every two minutes, second every five minutes, every one tenth of a second, and every one fifth of a second, and these different ways of recording were analyzed through comparison from one to each other to check their respective utilities. And also analysis of tracks of pedestrians, density, and use behavior of users were made, according to which the way in which Time-Lapse can be utilized was examined. Several useful results obtained from this study are shown as follows. First, Time-Lapse made it possible to continuously observe for a long time using minimu efforts, and a single tape which is able to cover from 12 hours up to 25 days is useful for observing variation of behavior in space with the passage of time and seasons. Second, among six ways of recording, the recording every one tenth of a second and every one fifth of a second are useful for finding the tracks of pedestrians, the number of users, the member compositions, the time spent in one place, and manner of use. And besides the moving direction and its purpose can be recognized in a short time, which makes it possile to see where crossings of moving directions occur. Third, the recording every thirty seconds, every minute, every two minutes, and every five minutes are useful for analyzing the density in space as well as for finding the number of users and frequency of facilities use. In particular the recording every thirty seconds made it possible to keep the track of pedestrians' walking, and to observe even slowly moving motions such as cleaning. But when the recording interval exceeds one minute, this was not possible. Fourth, time-lapse has advantages over the naked eye observation in several respects. Time-lapse can measure observed behavior and density in terms of number, and locate the position of users. Time-Lapse, if accompanied by other methods such as interviewing and question that can examine psychological aspects like satisfaction or the purpose of use and be a useful device for space studies.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.375-385
• /
• 2002

The IETF has defined the Intserv model and the RSVP signaling protocol to improve QoS capability for a set of newly emerging services including voice and video streams that require high transmission bandwidth and low delay. However, since the current Intserv model requires each router to maintain the states of each service flow, the complexity and the overhead for processing packets in each rioter drastically increase as the size of the network increases, giving rise to the scalability problem. This motivates our work; namely, we investigate and devise new control schemes to enhance the scalability of the Intesev model. To do this, we basically resort to the SCORE network model, extend it to fairly well adapt to the three services presented in the Intserv model, and devise schemes of the QoS scheduling, the admission control, and the edge and core node architectures. We also carry out the computer simulation by using ns-2 simulator to examine the performance of the proposed scheme in respects of the bandwidth allocation capability, the packet delay, and the packet delay variation. The results show that the proposed scheme meets the QoS requirements of the respective three services of Intserv model, thus we conclude that the proposed scheme enhances the scalability, while keeping the efficiency of the current Intserv model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.433-445
• /
• 2019

This study was designed to create an innovative Korean school space plan. This was done by performing an analysis of cases of student-tailored class operations and the composition of school space in Sweden's Vittra Telefonplan School. To this end, the research team analyzed prior studies, the Vittra school space and the student-tailored classes through an analysis of the literature, documents and video images. First, the OpenSpace was operating classes tailored to each student's academic growth and needs. Second, the open-space school space played a role as the space for student life. Third, the teacher played a role as an active guide and facilitator of students. Forth, the students' individual learning management team actively conducted coding classes by utilizing IT-based learning platforms. The implications of the Vittra School are as follows. When designing a new school, it is recommended to design a small school as small as possible, organize an open space according to the grade and not by the class, and operate the curriculum around the students' grade. When reorganizing existing schools, it is proposed that standardized classrooms be modified for schools with spare classrooms to create learning spaces that can vary for large to small and to practice project-oriented classes at the grade level.

• Journal of Digital Convergence
• /
• v.19 no.2
• /
• pp.245-251
• /
• 2021

As the trend of steadily increasing the number of single or double household, there is a growing demand to see who is the outsider visiting the home during the free time. Various models of face recognition technology have been proposed through many studies, and Harr Cascade of OpenCV and Hog of Dlib are representative open source models. Among the two modes, Dlib's Hog has strengths in front of the indoor and at a limited distance, which is the focus of this study. In this paper, a face recognition visitor access system based on Dlib was designed and implemented. The whole system consists of a front module, a server module, and a mobile module, and in detail, it includes face registration, face recognition, real-time visitor verification and remote control, and video storage functions. The Precision, Specificity, and Accuracy according to the change of the distance threshold value were calculated using the error matrix with the photos published on the Internet, and compared with the results of previous studies. As a result of the experiment, it was confirmed that the implemented system was operating normally, and the result was confirmed to be similar to that reported by Dlib.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.208-221
• /
• 2020

The objective of this study is to estimate and analyze the traffic density of continuous flow using the trajectory of individual vehicles and the headway of sample probe vehicles-front vehicles obtained from ADAS (Advanced Driver Assitance System) installed in sample probe vehicles. In the past, traffic density of continuous traffic flow was mainly estimated by processing data such as traffic volume, speed, and share collected from Vehicle Detection System, or by counting the number of vehicles directly using video information such as CCTV. This method showed the limitation of spatial limitations in estimating traffic density, and low reliability of estimation in the event of traffic congestion. To overcome the limitations of prior research, In this study, individual vehicle trajectory data and vehicle headway information collected from ADAS are used to detect the space on the road and to estimate the spatiotemporal traffic density using the Generalized Density formula. As a result, an analysis of the accuracy of the traffic density estimates according to the sampling rate of ADAS vehicles showed that the expected sampling rate of 30% was approximately 90% consistent with the actual traffic density. This study contribute to efficient traffic operation management by estimating reliable traffic density in road situations where ADAS and autonomous vehicles are mixed.

• Journal of Digital Convergence
• /
• v.19 no.7
• /
• pp.217-226
• /
• 2021

The use of personal mobility(PM) is increasing because of preading shared mobility, but, it causes risk of accidents and fear to pedestrians because of lack of sound. The purpose of this study is to find out the effects of the alert sound in PM and driving direction on risk perception of pedestrians, awareness on PM driver, and allowance for driving on each road. The 8 videos were produced from a pedestrian perspective, depending on the alert sound type(silent, vess, bell, voice) and direction of driving(front, back). After watching each video, participants completed surveys. There was a non-effect on the driving direction. Regardless of the alert sound type, all of the sounds reduced the risk perception. Also, the awareness of PM drivers and allowance for driving on each road were positive. This study found that PM needed an alert sound for pedestrian safety. We expect the results of the study to help improve awareness of PM and make policies and regulations.