• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.984-987
• /
• 2003

This paper discusses the lateral vibration of a bar which has its tip free. The uniform bar has a solution by summation of some simple exponential functions. But if its shape is not uniform, its solution could be by Bessel's function, or mathematical solution could not be existed. Even if the solution of Bessel's function exists. as Bessel function is a series function, we must get the solution by numerical method, Hereof the author proposes the solution of the matrix method by Ritz's method, and proposes a new deflection shape

• Geomechanics and Engineering
• /
• 제2권1호
• /
• pp.45-56
• /
• 2010

The current study presents a mathematical model and numerical method for free vibration of tapered piles embedded in two-parameter elastic foundations. The method of Discrete Singular Convolution (DSC) is used for numerical simulation. Bernoulli-Euler beam theory is considered. Various numerical applications demonstrate the validity and applicability of the proposed method for free vibration analysis. The results prove that the proposed method is quite easy to implement, accurate and highly efficient for free vibration analysis of tapered beam-columns embedded in Winkler- Pasternak elastic foundations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.533-540
• /
• 2001

Material damping is an important parameter to evaluate the site response by a dynamic loading. Currently the material damping of the subgrade is mainly determined by a resonant column testing. Typical methods to evaluate material damping include half-power bandwidth method and free-vibration decay method. In the large strain range, the half-power bandwidth method gives an erratic damping factor, because the method is based on the assumption of the linear behavior of a specimen. The free-vibration decay method has also limitations in that the damping factors vary with the range of cycles in calculation, and also in that the specific shear strain can not be designated for the free vibration. In this study, the frequency-phase method, which was developed to evaluate material damping of a beam simply supported, is introduced to evaluate the material damping by the resonant column testing. Also, the comparison among half-power method, free-vibration decay method and the frequency-phase method is provided for a remolded sand.

• 한국소음진동공학회논문집
• /
• 제18권5호
• /
• pp.564-571
• /
• 2008

This paper is concerned with the free vibration analysis of an annular plate with boundary conditions of simply supported-free, clamped-free and free-free, respectively. Exact solutions for the natural frequency and mode of an annular plate can be obtained by solving the differential equation but other methods such as the Rayleigh-Ritz method and the finite element method can be also used. In this research, we applied the Independent Coordinate Coupling Method(ICCM) to the annular plate and prove that the ICCM can accurately predict the natural frequency and mode shape of the annular plate. The numerical results show that the ICCM can be used effectively for the free vibration problem of plate with a hole compared to the Rayleigh-Ritz method and the finite element method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1939-1944
• /
• 2000

Different test methods were used to measure and compare the loss factor of a steel beam. They are free vibration logarithmic decay method, half-power bandwidth method using narrow-band analysis, wide-band analysis method with inverse FFT. In these tests, specimens are clamped at one end. Free vibration method and half-power bandwidth method gave good results. Effect of vibration pick-ups were tested. We also tried center excitation method but could not obtain loss factor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.780-787
• /
• 2013

Virtual Seat Method (VSM) is used in this study for a combined evaluation method (objective & subjective) to determine comfort value of passenger vehicle seat in terms of idle vibration. In the study, a process for applying VSM divided into two stages is established. Two kinds of seat mounting passenger vehicle and six subjects are employed to compare the comfort value obtained by VSM method and by SEAT value. As a conclusion, the results by the two methods were well consistent so that VSM is verified as a method to measure ride comfort of seat in terms of idle vibration at passenger vehicle.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.172-178
• /
• 2016

The location template matching (LTM) method is a technique of identifying an impact location on a structure, and is often applied to structural health monitoring and large scale human-computer interface (HCI) systems. The LTM method utilizes a certain measure of similarity between two time signals. The correlation coefficient is most widely used for this purpose, and the group delay based method is recently proposed to improve the accuracy of finding the best matching pair of signals. In practice, one of key essential consideration for implementing the LTM method is to guarantee that a sufficient number of vibration modes must be contained in the measured signal, and yet the lower sampling rate is needed for a real-time implementation. In this paper, the properties of correlation coefficient and group delay with respect to the number of vibration modes are investigated. A few important results are obtained through extensive computer simulations and experiments. If the number of vibration modes contained in the measured signal is more than four it is sufficient for the correlation based LTM method, while the group delay based LTM method requires smaller number of vibration modes.

• Structural Engineering and Mechanics
• /
• 제30권5호
• /
• pp.603-617
• /
• 2008

Three dimensional coupled bending-torsion dynamic vibrations of thin-walled open section beam subjected to moving vehicle are investigated by transfer matrix method. Through adopting the idea of Newmark-${\beta}$ method, the partial differential equations of structural vibration can be transformed to the differential equations. Then, those differential equations are solved by transfer matrix method. An iterative scheme is proposed to deal with the coupled bending-torsion terms in the governing vibration equations. The accuracy of the presented method is verified through two numerical examples. Finally, with different eccentricities of vehicle, the torsional vibration of thin-walled open section beam and vertical and rolling vibration of truck body are investigated. It can be concluded from the numerical results that the torsional vibration of beam and rolling vibration of vehicle increase with the eccentricity of vehicle. Moreover, it can be observed that the torsional vibration of thin-walled open section beam may have a significant nonlinear influence on vertical vibration of truck body.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.375-382
• /
• 2005

In this paper, a practical control method of wind-induced vibration of high-rise buildings is presented in the form of resizing algorithm. In the structural design process for high-rise buildings, the lateral load resisting system for the building is more often determined by serviceability design criteria including wind-induced vibration level. Even though many drift method have been developed in various forms, no practical design method for wind induced vibration has been developed so far. Structural engineers rely upon heuristic or experience in designing wind induced vibration. The performance of the proposed method is evaluated by comparing wind-induced vibration levels estimated both from approximate techniques and wind tunnel test.

• 한국지진공학회논문집
• /
• 제1권4호
• /
• pp.37-43
• /
• 1997

여러 가지 진동원으로부터 전파되는 진동으로 인하여 진동폐해민원이 계속적으로 증가하는 추세에 있으나 이에 대한 진동규제기준이 미흡한 상태이다. 진동피해의 예측이나 경감방안을 마련하기 위해서 간편하고 실용적인 진동예측이 절실한 상태이다. 본 연구에서는 Newmark와 Hall이 제시한 증폭계수의 개념을 도입한 응답스펙트럼을 이용하여 쉽게 진동을 예측할 수 있는 기법을 제시하고 그 적용성을 검토하고자 한다. 이를 위하여 운행중인 지하철 구조물 내부 및 지상과 건물에서의 진동을 측정하였으며 제시된 방법으로 분석한 결과 본 방법이 진동예측에 손쉽게 적용될수 있음을 보여 주었다.