• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.247-251
• /
• 2001

Nowadays, base isolation systems such as lead-rubber bearing, elastomer bearing and sliding bearing have been installed to the various structures to prevent the disaster from seismic. The performance of base isolation system have been well proved by model-scale experiments and numerical analysis. However. the seismic response data measured at real large base-isolated structures is still insufficient. This paper presents a seismic monitoring system, acquiring real-time acceleration signals up to 32 channels, displaying time history and spectrum of the signals, storing the acquired data at a PC hard disk, and replaying the saved data. Moreover, the system can be operated without any limitation for monitoring period by automatic management of stored data file. The developed system has been installed at a real base-isolated building using lead-rubber bearings and we expect its seismic response data with ground motion signal can be well licquired in case of earthquake occurrence.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.958-961
• /
• 2004

This paper presents a plant control panel model for the analysis. Seismic qualification analysis for the plant control panel is carried out to confirm the structural integrity under the seismic conditions represented by required response spectra(RRS). For the analysis finite element method(FEM) is used. And mode combinations are adopted to obtain the reliability of the spectrum analysis. The analysis results shows that the plant control panel system is designed as a dynamically rigid assembly, without any resonance frequency below 33Hz. The calculated stress of the plant control panel system is much less than yield stress of used steel.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.809-812
• /
• 2005

This paper explains environmental tests of vessel-launched missiles, verifying if a fully assembled missile performs properly from disturbance on delivery by vehicles or naval vessels. We also have operated vibration tests by ground and naval transportation as well as shock tests by naval transportation before firing. The environmental tests have adopted Military Standard Specification and confirmed missile's reliability by performance tests, followed by missile's development. However, this significant testing which have meaning was dong by the missile's body and not with parts.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.632-637
• /
• 2012

Antenna equipment is transported being assembled to moving equipment and often subjected to vibration and shock excitation during transportation. In these circumstances, structural safety of antenna equipment must be secured. Wire rope isolators are assembled between moving equipment and antenna equipment to reduce the level of vibration and shock. In this paper, a isolator that are suitable to the system is selected and dynamic characteristics analysis of driving on antenna equipment is conducted using real system and the result is compared with response analysis. Also modal test of array-antenna pack-assembly is conducted and structural safety of that is secured by reinforcing its structure.

• 한국음향학회지
• /
• 제14권5호
• /
• pp.51-57
• /
• 1995

본 논문에서는 청각 모델을 기초로 잡음에 강한 음성 특징 추출을 연구하였다. 청각모델은 basilar membrane 모델, 섬모세포(hair cell) 모델과 스펙트럼 출력단으로 구성하였다. Basilar membrane 모델은 음파의 진동에 따른 전달 특성을 묘사한 것으로 대역 통과 필터의 열로 나타난다. 섬모 세포 모델은 basilar membrane의 진동에 의한 신경 물질로의 변환을 나타낸다. 이것은 입력의 상대적인 값에 크게 반응하는 adaptation 기능을 이용하게 되며, 잡음 제거에 중요한 역할을 하게 된다. 스펙트럼 출력 단은 각 채널의 평균 firing rate를 이용하여 mean rate spectrum을 형성한다. 그리고 mean rate spectrum을 이용하여 특징 벡터를 추출하였다. 실험 결과는 청각 구조에 기초한 특징 추출이 다른 특징 추출 방법에 비해 잡음에서 더 향상된 성능을 가짐을 보였다.

• Wind and Structures
• /
• 제17권6호
• /
• pp.609-627
• /
• 2013

The Yingxian wooden tower in China is currently the tallest wooden tower in the world. It was built in 1056 AD and is 65.86 m high. Field measurements of wind speed and wind-induced response of this tower are conducted. The wind characteristics, including the average wind speed, wind direction, turbulence intensity, gust factor, turbulence integral length scale and velocity spectrum are investigated. The power spectral density and the root-mean-square wind-induced acceleration are analyzed. The structural modal parameters of this tower are identified with two different methods, including the Empirical Mode Decomposition (EMD) combined with the Random Decrement Technique (RDT) and Hilbert transform technique, and the stochastic subspace identification (SSI) method. Results show that strong wind is coming predominantly from the West-South of the tower which is in the same direction as the inclination of the structure. The Von Karman spectrum can describe the spectrum of wind speed well. Wind-induced torsional vibration obviously occurs in this tower. The natural frequencies identified by EMD, RDT and Hilbert Transform are close to those identified by SSI method, but there is obvious difference between the identified damping ratios for the first two modes.

• 복합신소재구조학회 논문집
• /
• 제6권1호
• /
• pp.1-5
• /
• 2015

This study presents the design and implementation of a structural health monitoring system based on acceleration measurements which used to observe and investigate the structural performance of the administration building in Seoul National University of Education during an earthquake event. The frequency and spectrum are analyzed to assess the building performance during an earthquake shaking which took place on March 31st, 2014. The results indicate that : the vibration of the roof is more clear and dominant during the shaking, and the response of building during earthquake is so small and safe.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.51-56
• /
• 2015

In the vibration test, Most of the test specifications is standardized methods of sinusoidal excitation. However, in accordance with the ability of the test equipment progress and developments of electronic technology, methods of random vibration test is standardized in the MIL standard. Therefore, in this study, we tried to analyze Missile Guidance Structure using a finite element analysis with ABAQUS 6.13 that is commercial program. First, Random response analysis is analyzed. Following analyzing the results, we wanted to find the model that is lightweight and resonance does not occur.

• Earthquakes and Structures
• /
• 제7권4호
• /
• pp.415-448
• /
• 2014

A method is presented in this paper to analyze the dynamic response behavior of suspended building structures. The effect of semi-rigid connections that link suspended floors with their supporting structure on structural performance is investigated. The connections, like the restrains in non-structural suspended components, are designed as semi-rigid to avoid pounding and as energy dissipation components to reduce structural response. Parametric study is conducted to assess the dynamic characteristics of suspended building structures with varying connection stiffness and suspended mass ratios. Modal analysis is applied to identify the two distinct sets of vibration modes, pendulum and bearing, of a suspended building structure. The cumulative modal mass is discussed to ensure the accuracy in applying the method of response spectrum analysis by SRSS or CQC modal combination. Case studies indicate that a suspended building having semi-rigid connections and proper suspended mass ratios can avoid local pounding failure and reduce seismic response.

• 융합정보논문지
• /
• 제12권3호
• /
• pp.151-157
• /
• 2022

차량의 진행을 근사화한 외부 가진력을 고려한 강제 진동에서의 주파수 특성을 알아보고자 하였고, 다양한 가진 진폭과 주파수를 갖는 외력이 작용하면서 차량이 둔턱을 넘어갈 때에 차량에서 일어나는 주파수 영역의 진동특성을 분석하였다. 응답은 수치해석을 통하여 변위, 속도 및 가속도 등의 응답을 구하였고 이들을 FFT 처리하여 각 시간 응답의 FRF(Frequency response function) 주파수 특성을 분석하였다. 특히, 차량 고유모드와 외부 가진 모드의 발생 위치를 확실하게 비교하여 밝혔고 외부 가진력에 의한 강제진동 모델에서 변위, 속도 및 가속도의 거동과 주파수 응답함수에서의 고유모드의 위치와 주변의 가진 모드 분포 및 파워 스펙트럼, 실수부와 허수부의 FRF도 나타났으며 각 FRF에서 근접 모드 특성도 분석하였다. 외부 가진력으로 정현파의 가진력과 임펄스 가진력에 의한 둔턱 주파수를 고려하여 가정한 근사 모델에서 발생 모드를 구별할 수 있었다. 상당하는 질량, 감쇠 및 강성을 변화하는 여러 시스템에서 강제진동의 응답특성을 체계적으로 다루었다.