• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.393-396
• /
• 2007

EGR is well established and efficient means to reduce NOx emissions. The increase of EGR rate affects the ignition delay of the combustion due to the lower oxygen availability. The increasing of the ignition delay period causes large combustion noise. In this study, the effects of EGR and Induction Point on combustion noise are investigated by measuring cylinder pressure and noise. As a result, The Combustion noise is markedly increased under the application of EGR. The increased premixed distance by displacing EGR Induction point in flow direction causes the uniform EGR distribution and the modulation level of the combustion noise is reduced slightly.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.212-213
• /
• 2008

Ultrasonic fiber sensor is more cost-effective than optical fiber sensor using light. However, optical fiber lines are separately used for sensing. Thus, if it is applied for huge system, it is need many lines of the sensor systems. To overcome this point, novel ultrasonic sensor systems considering wave cancellation and modulation were newly developed. By using this schema, reference-free sensor system can be developed. By using ultrasonic waves of different excitation frequencies, multiple input-signal output sensor system was also developed by applying spectrum analyses. Using the array type sensor system, the leakage of liquid and its evaporation can be monitored successfully.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.649-653
• /
• 2006

Engine Noise is composed of the mechanical and combustion noise. The contribution of combustion noise is generally bigger than the contribution of the mechanical noise at idle condition in DI diesel engine. That noise usually makes a roughness problem at the fundamental engine order. It is difficult to remove the modulation frequency so we have to directly reduce the combustion noise. The key effect of combustion noise reducing solution is the modification of the combustion pressure profile. It is accomplished by the multiple injection method and we solved the 400Hz combustion noise and improved the sound quality at idle condition in DI diesel engine.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.887-887
• /
• 2004

The areal density of the hard disk drive(HDD) has been increased due to technological advances recently. To achieve the high areal density magnetic recording requires an extremely small gap between the air-bearing surface (ABS) and disk. At the same time, the slider mass and size should be reduced to minimize the physical contact under the operational and environmental conditions. Almost all of 2.5＂HDD companies will get ready for adoption of FEMTO slider and already utilized the small slider. FEMTO and small size slider will be mainstream in the 2.5" and other small form factor HDD in the near future. In this study, the flying characteristic of FEMTO slider was examined. Based on the simulation, FEMTO slider is very stable in flying dynamic under the disk modulation, however the flying height sensitivity of the manufacturing tolerances is much bigger than PICO slider. And the other characteristics like impulse response and load/unload dynamic were also examined in this study.tudy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.495-498
• /
• 2004

In the sound insulation measurements, the influence of background (extraneous) noise is often serious problem and how to reduce its effect and to improve the signal-to-noise(S/N) ratio is an important theme. As the background noise, such extraneous noises as road traffic noise and machine noise often disturb the measurement. In laboratory measurements on specimens with high sound insulation performances, even the internal noise of the measurement system can become a problem. To improve the signal-to-noise ratio and to improve the measurement accuracy, various kinds of digital signal processing techniques can be applied. In this paper, four kinds of digital signal processing techniques are applied and their effectiveness is examined by a simple sound insulation measurement.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.785-790
• /
• 2014

The purpose of this study is to identify the significant sound quality metric and compose the sound quality index of motor driven roller blind which is part of vehicle sunroof. Before subjective evaluation, sound characteristics of roller blind was analyzed and set the target operating sound for subjective evaluation. Thus, transfer sound of roller blind which has the characteristics of sound modulation was used for subjective evaluation. Linear regression was carried out by chosen Zwicker's metrics which are pointed by comments of jurors. Loudness and sharpness related metrics are prime metrics in sound quality index we composed. Effect of roller blind assay when it is attached to real vehicle was identified to evaluate the validity of index.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.414-419
• /
• 2003

There are some methods fur extracting mode shapes from a continuously scanned data such as a modulation, Chebyshev polynomial, and Hilbert approach. In this paper, Chebyshev and Hilbert approaches were investigated through the numerical experiment first. As some experimental parameters were altered with small quantities, data were checked and plotted. From those results, the effects of unexpected parameters will be configured. And then, it will be actually helpful to select the proper method for specific testing environments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1114-1119
• /
• 2001

Previously, we have analyzed Vehicle interior noise by dBA based analysis. However, dBA based analysis can not describe the various sound phenomenon that consumer hear. Sound quality matrics can describe various sound phenomenon that dBA based analysis could not explain. In this paper, we will demonstrate the difference of between dBA based analysis and real sound feeling, and analyze sound examples by sound metrics and Principle Component Analysis. In this way we can analyze vehicle interior noise more effectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.741-744
• /
• 2004

In concrete pavements with uniform tining space, the whine noise which has high frequency spectrum related to the uniform tining space exist. In this paper, randomization procedure of tining space for concrete pavements is proposed. The proposed procedure developed based on the LCG(Linear Congruential Generator) algorithm. And the factor concerned in the procedure are drag span length, number of different tining space, ratio of each tining space, total tinings of each size, sequence of actual tining.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.441-444
• /
• 2004

In the sound insulation measurements, the influence of background (extraneous) noise is often serious problem and how to reduce its effect and to improve the signal-to-noise(S/N) ratio is an important theme. As the background noise, such extraneous noises as road traffic noise and machine noise often disturb the measurement. In laboratory measurements on specimens with high sound insulation performances, even the internal noise of the measurement system can become a problem. To improve the signal-to-noise ratio and to improve the measurement accuracy, various kinds of digital signal processing techniques can be applied. In this paper, four kinds of digital signal processing techniques are applied and their effectiveness is examined through field measurements.