• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.459-460
• /
• 2005

• 소음진동
• /
• 제8권1호
• /
• pp.171-179
• /
• 1998

The present paper deals with the dynamic stability and vibration suppression of a cantilevered flexible pipe having a tip mass under an internal flowing fluid. The equations of motion are derived by energy expressions using extended Hamilton's principle, and some analytical results using Galerkin's method are presented. Finally, the vibration suppression technique by means of an internal fluid flow is demonstrated experimentally.

• 한국음향학회지
• /
• 제16권5호
• /
• pp.36-42
• /
• 1997

본 논문은 건축구조체 내에서 진동 에너지의 크기와 흐름을 측정하는 하나의 방법인 진동인텐시티측정법에 관한 내용이다. 진동인텐시티법의 기본적인 원리와 계측이론을 이론적 해석이 명쾌한 1차원 보를 대상으로 하여 이론 및 실험적으로 검토하였다. 또한 징동가속도레벨을 이용한 해석 결과와 비교함으로써 진동인텐시티의 계측가능성을 검토하였다. 그 결과, 근접장의 영향이 무시가능한 조건에서는 진동가속도 분포로부터 구한 계산값과 진동인텐시티법에 의한 측정값이 거의 일치하여, 이러한 류의 진동 계측에 진동인텐시티법이 응용될 가능성이 있음을 알수 있었다. 그러나 반사파의 성분이 많이 존재하는 음장, 특히 근접장에 있어서는 측정신호가능 위상차비가 적어 진동인텐시티를 계측하기 어렵다는 것을 알았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.971-977
• /
• 2005

Power Flow Analysis (PFA) is developed for the effective predictions of frequency-averaged vibrational response in medium-to-high frequency ranges. In PFA, the power coefficients of semi-infinite structure and for-field energy density are used to predict the vibrational responses of structures. Generally, at high frequencies, PFA can predict narrow-band frequency-averaged vibrational responses of built-up structures. However, in low- to medium frequency ranges, the dynamic responses obtained by PFA represent broad-band frequency-averaged vibrational energy densities. For the prediction of vibrational response variance in Power Flow Finite Element Method (PFFEM), the variances of input power and joint element matrix describing structural coupling relationship are derived. Finally, for the validity of developed formulation, numerical examples for two co-planer plates are performed and the vibrational response variance of the structure are compared with the results of classical and PFFEM solutions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.608-609
• /
• 2008

An alternator which converts mechanical rotating energy into electric energy is an important component of a vehicle. It operates in broad range from 3000 RPM to 18000 RPM. So, sufficient flow rate and low noise are needed in such broad operating range for a cooling fan of this alternator. In current study, the cooling fan of an alternator is developed through DFSS process and numerical analysis. In order to calculate flow rate and noise level, SC/Tetra and FlowNoise S/W are used respectively, for a new developed fan, compared with original model, numerical result shows 3 dBA reduction and measured value shows 4 dBA reduction.

• 소음진동
• /
• 제8권6호
• /
• pp.1053-1061
• /
• 1998

In this paper. the power flow analysis(PFA) method is applied to the prediction of the vibrational energy density and intensity of coupled co-planar plates. To cover the energy transmission and reflection at the joint of the plates. the wave transmission approach is Introduced with the assumption that all the incident waves are normal to the joint. By changing the frequency ranges and internal loss factors. we have obtained the reliable PFA results. and compared them with the analytical exact solutions.

• 에너지공학
• /
• 제28권1호
• /
• pp.65-72
• /
• 2019

한국정부는 재생에너지를 이용한 발전량 비중을 2030년까지 총 발전량의 20%까지 높이겠다는 목표를 제시하였다. 풍부한 해양 신재생에너지 자원은 한국정부가 이 목표를 달성하는데 중요한 역할을 할 수 있을 것이다. 이 논문은 1.0 m/s의 낮은 유속에서도 높은 효율을 달성할 수 있는 유동유발진동 현상을 이용한 조류에너지 발전기술을 소개하고 한국 7개 해안의 평균유속을 바탕으로 높은 효율을 달성할 수 있는 유동유발진동 발전기의 최적 설계를 제안하고자 한다. 또한, 이를 바탕으로 각 해안에서 발전할 수 있는 이론적 잠재량을 산정하고자 한다. 유동유발 발전기술을 이용한 연간 이론적 최대발전량은 221.77 TWh로 예측되었고 이는 2013년 한국의 총 전력소비량의 42.3%에 해당한다. 본 연구결과는 유동유발진동을 이용한 발전기술을 이용한 조류발전기술이 한국 정부가 제시한 목표를 달성하는데 중요한 역할을 할 수 있음을 보여준다.

• Nuclear Engineering and Technology
• /
• 제30권1호
• /
• pp.8-16
• /
• 1998

In this work a method to detect the vibrational peak and to decide the vibrational mode of detected peak for core internal vibration monitoring system which is particularly concerned on the core support barrel (CSB) and fuel assemblies is developed. Flow induced vibration and aging process in the reactor internals cause unsoundness of the internal structure. In order to monitor the vibrational status of core internal, signals from the ex-core neutron detectors are transformed into frequency domain. By analyzing transformed frequency domain signal, an analyst can acquire the information on the vibrational characteristics of the structures, i.e., vibration frequencies of each component, vibrational level, modes of vibration, and the causes of the abnormal vibration, if any. This study is focused on the development of the automated monitoring system. Several methods are surveyed to define the peaks in power spectrum and fuzzy theory is used to automatic detection of the vibrational peaks. Fuzzy algorithm is adopted to define the modes of vibration using the peak values from fuzzy peak recognition, phase spectrum, and coherence spectrum.

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.328-334
• /
• 2012

Power flow finite element method(PFFEM) combining power flow analysis(PFA) with finite element method is efficient for vibration analysis of a built-up structure, and power flow boundary element method(PFBEM) combining PFA with boundary element method is useful for predicting the noise level of a vibrating complex structure. In this paper, the coupled PFFE/PFBE method is used to investigate the vibration and radiated noise of the unmanned underwater vehicle(UUV) in water. PFFEM is employed to analyze the vibrational responses of the UUV, and PFBEM is applied to analyze the underwater radiation noise. The vibrational energy of the structure is treated as an acoustic intensity boundary condition of PFBEM to calculate underwater radiation noise. Numerical simulations are presented for the UUV in water, and reliable results have been obtained.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1909-1915
• /
• 2004

The hermetic rotary compressor is one of the most important components of an air conditioning system since it has a great effect on both the performance and the noise and vibration of the system. Noise and vibration occurs due to gas pulsation during the compression process and to unbalanced dynamic force. In order to reduce noise and vibration, it is necessary to identify their sources and transmission path and effectively control them. Many approaches have been tried in order to identify the noise transmission path of a compressor. However, identification has proven to be difficult since the characteristics of compressor noise are complicated due to the interaction of the compressor parts and gas pulsation. In this study, the statistical energy analysis has been used to trace the energy flow in the compressor and to identify the transmission paths from the noise source to the exterior sound field.