• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.663-666
• /
• 2004

An analysis of the annual frequency of collapse(AF) is performed for each bridge pier exposed to ship collision. AF is computed for each bridge component and vessel classification. The summation of AFs computed over all of the vessel classification intervals for a specific component should equal the annual frequency of collapse of the component. The designer should use judgment in developing a distribution of the vessel frequency data based on discrete groupings or categories of vessel size by DWT. In the present study the effect of vessel classification on the annual frequency of collapse in the ship collision risk assessment is investigated by illustrative numerical examples based on the vessel frequency data of the domestic harbor. The DWT interval for larger vessels has more effect on the ship collision risk. Therefore the expert judgement in determining the larger DWT interval is required because the design impact lateral resistances of bridge components depend on the ship collision risk.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.29-35
• /
• 2018

According to the Global Wind Report of the Global Wind Energy Council (GWEC) in 2017, global wind power electricity generation capacity has been dramatically developing from 23,900 MW in 2001 to 486,790 MW in 2016. However, wind power generation in South Korea accounts for only 0.2 % of total power generation. Nonetheless, electricity production by wind power generation is soon expected to reach the grid parity where the cost of generating electricity by wind power is equal to the cost of fossil fuels such as oil. In this study, we analyzed the criteria of vessel traffic and fishing activities of major offshore wind farms in Europe where 88 % of the offshore wind power facilities are located. Finally, we suggest critical considerations based on the analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.493-500
• /
• 2015

The importance of the air and vessel traffic control center is increasing rapidly after the recent accident of 'Sewol ferry'. Aviation, marine, and the logistics sectors are already using monitoring and control technology widely. However, the monitoring and control system for complex and dangerous construction sites operation has yet to be employed. A monitoring/control system is required for effective communication between the control center and the construction equipment fleet at a construction site, and also the exact role that notifies accurate process and identification of hazards on construction sites as needed. Therefore, this paper presents the study about communication between the construction equipment fleet and the control center through the comparison of air traffic, marine, and logistics control systems for the development of construction equipment fleet management system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.267-268
• /
• 2022

Jeju coastal waters are limited to high-risk areas due to the passage of international cruise ships, passenger ships, with a large number of people and fishing boats, or to the jeju port and the jeju civilian-military combined port and near by seas, so a VTS system will be established along jeju and seogwipo coast. There is no accurate standard for determining the number of people required by the maritime traffic control center. Therefore, this study calculated the required operating personnel for control seats on the coast of jeju and seogwipo by using VTS big data to efficiently calculate the workload of maritime traffic control. It is judged that this study can be used basic data for research that sets the standard for calculating the control workload.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.2
• /
• pp.1-12
• /
• 1998

The fundamental objectives of vessel traffic services (VTS) are the safety of traffic, efficient traffic flow and the protection of marine environment. And the coverge of VTS is used to be within the port and their approaches. It , however, is tend to expand the coverge beyond the radar coverage and the vessel carrying dangerous cargo. Therefore this study aims to investigate the international tendancy of the extended VTS system, and take a field test of using KOREASAT for the extended VTS system in Korean coastal waters. As the results of the test, KOREASAT is proved to be one of the alternatives for extended VTS system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.401-406
• /
• 2010

Vessel Operator has been navigating with subjective sate distance in accordance with night & daytime, fore & aft, port & stbd abeam and visibility situation. This sate distances may different depending on inside & outside harbor limit, current, wind and visibility situation. By now, the concept of proper sate distance between navigating vessels has been adopted in Korea, using the early 1980's foreign data. And the safe distance is being used with the same value without any consideration of inside & outside harbor and the kind of vessel. So it is necessary to evaluate or search proper distance concept based on different sate consciousness of Korean manners. This paper aims to develop the basic model for marine traffic evaluation and the new model of marine traffic congestion. Also this paper proposes the basic control guideline of vessel traffic service center. The result of this study showed that minimum sate distance should be 4.4L forward, 3.1L aft and 26L abeam in case of good visibility in daytime, considering various parameters such as visibility, day and night. Some differences Here found between the existing minimum sate distance and the new minimum sate distance derived from the result of this study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.31-38
• /
• 2020

The characteristics of ship traffic routes and the long term fluctuation in marine traf ic volume of the incoming and outgoing routes of the Yeosu Gwangyang Port were analyzed using vessel traffic data from the past 22 years and a real-time vessel traffic volume survey performed for 72 hours per year, for three years, between 2015 and 2017. As of 2017, the number of vessels passing through Yeosu Gwangyang Port was about 66,000 and the total tonnage of these ships was about 804,564 thousand tons, which is a 400 % increase from the 189,906 thousand tons shipped in 1996. Specifically, the dangerous cargo volume was 140,000 thousand tons, which is a 250 % increase compared to 1996. According to the real-time vessel traffic volume survey, the average daily number of vessels was 357, and traf ic route utilization rates were 28.1 % in the Nakpo sea area, 43.8 % in the specified sea area, and the coastal area traf ic route, Dolsan coastal area, and Kumhodo sea area showed the same rate of 6.8 %. Many routes meet in the Nakpo sea area and, parallel and cross passing were frequent. Many small work vessels entered the specific sea area from the neighboring coastal area traffic route and frequently intersected the path of larger vessels. The anchorage waiting rate for cargo ships was about 24 %, and the nightly passing rate for dangerous cargo ships such as chemical vessels and tankers was about 20 %. Although the vessel traffic volume of Yeosu Gwangyang Port increases every year, the vessel traffic routes remain the same. Therefore, the risk of accidents is constantly increasing. The route conditions must be improved by dredging and expanding the available routes to reduce the high risk of ship accidents due to overlapping routes, by removing reefs, and by reinforcing navigational aids. In addition, the entry and exit time for dangerous cargo ships at high-risk ports must be strictly regulated. Advancements in the VTS system can help to actively manage the traffic of small vessels using the coastal area traffic route.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.775-782
• /
• 2021

The Myodo-Strait at Yeosu Port is normally used as a major vessel passage for dangerous cargo carriers that carry regular products of dangerous goods. Currently, the Myodo-Strait allows only single passage, and the speed of passage is also limited to 8 knots. As a result, demurrage at the wharf of hazardous goods are also on the rise. It is expected that the development of a number of dangerous commodity wharf in the future will increase the volume of vessel traffic and increase the number of vessels used in the project area. Therefore, it is urgent to improve the waterway in order to secure the safety of ships using the waterway and improve the demurrage. This study proposed an improvement plan for the waterway through the analysis of the marine environment of the waterway and the process of collecting opinions from users in the sea area. and it was finally proposed to expend the width of the strait to 300m and secure a depth of 9.50m through Guidelines of Port and Harbor Design review and ship handling simulation evaluation. In addition it was evaluated that the vessel traffic congestions at peak-time in the situation of solo passage was greatly improved from 71.01% to 47.3% even when it was allowed to ship's crossing passage, as a result of vessel traffic congestions evaluation. According to the proposed improvement plan, the safety of ships' passage in the project area can be secured, and the issue of demurrage was also considered to be improved.

• Journal of Navigation and Port Research
• /
• v.43 no.4
• /
• pp.250-255
• /
• 2019

The objective of this study was to analyze the risk of collision accidents to the VTSOs (Vessel Traffic Service Operators) as small ferries and fishing boats are expanded for monitoring targets. The VTSOs was surveyed, the scale of the small vessels defined and the course of general cargo vessels and small vessels along the Busan VTS area investigated for three days. From calculating the risk with CoRI, patterns of increased or decreased risk due to course deviation were similar, and there was no significant difference between the maximum values and the minimum values. In addition, most VTSOs responded that the minimum time required was approximately three minutes to safely instruct in encounter situation, however, the collision risk with a small vessel is very rapidly changing within the three minutes, which is likely to increase the workload and decrease the concentration of the VTSOs. The objective of this study was to investigate the effect on VTSOs with respect to the expansion of small vessels as collision risk, it is expected that it will contribute to the establishment of a suitable scale for the target vessels for VTS through the analysis of each index of the CoRI model and various case studies.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.569-576
• /
• 2008

By the development of international trade in last decades, Korean International Trade has been grown rapidly and Korean Port and Port facilities have been improved stimultaneously: finally volume of the marine traffic increased rapidly. Presently, 15 VTS centers have serving in Korean waters and since the introduction of the first VIS Center in Korea there is no quantitative analysis to find workload of VIS operator. After that Port-MIS and De-brief data have been gathered for 7 days and inbound-outbound vessels time-g/t table prepared and traffic volume examined for each V1S center. Hence $L^2$ conversion traffic volume and dangerous vessel ratio obtained Later on conversion controlled number obtained by denoting ratio 1.0 to directly controlled vessels by VTSO and denoting ratio 0.3 to indirectly controlled vessels by VTSO. Traffic volume, large vessel ratio, dangerous vessel ratio, dimension of VTS controlled area, marine accident occurrence frequency and communication volume of comm. log can be counted as a factor which influence to workload of VTSO. All those factors have been examined and analyzed. Finally, ship's size and dangerous vessel ratio have been chosen to derive the Number of composite conversion control for workload formula.