• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.56-67
• /
• 2018

With the introduction of the maritime safety supervisor system in Korea following the passenger vessel Sewol accident, the safety control system for coastal vessels has been reinforced. A maritime safety supervisor performs marine accident prevention activities by offering periodical or occasional guidance and supervision. When a deficiency is found during guidance or supervision sessions, an order for improvement is issued to rectify the problem by such measures as supplementation or replacement of vessel facilities, improvement of work hours and working conditions for employees, educational and training programs for executives and employees, or the improvement of other affairs relating to maritime safety control. However the present order for navigation suspension by a maritime safety supervisor is limited solely to supplementation or replacement. For this reason, orders for navigation suspension against other facilities is impossible, even if a serious deficiency that could lead to a marine accident such as poor cargo loading conditions or unqualified crew is identified. Therefore, the order for vessel navigation suspension to secure seaworthiness should be expanded to include cargo loading/unloading operations, certificates and documentation, maritime safety management systems, and human elements including emergency drills and working conditions, in addition to the supplementation or replacement of vessel facilities that exists.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.708-716
• /
• 2019

After the Sewol ferry disaster, the maritime safety supervisor system was introduced to strengthen maritime safety control for coastal vessels. If any critical defect is found in vessel facilities during periodical or occasional guidance and supervision on a vessel, a maritime safety supervisor takes an administrative measure: detention of the vessel until it has been completely corrected. The detention order is one of the most powerful regulations exercised by a maritime safety supervisor. It would not be an overstatement to say that the guidance and supervision conducted by a maritime safety supervisor is very important for the safety of a vessel and protection of the maritime environment. However, the regulatory level of each Regional Office of Oceans and Fisheries toward vessels may vary with the enforcers, and an individual's intentional act or negligence might occur during the execution process. Detention of a coastal vessel by the Regional Office of Ocean and Fisheries can easily lead to delayed navigation, and a vessel owner may suffer economic loss from suspension of a charter party. Nevertheless, the Maritime Safety Act does not prescribe filing a petition for objection to the measure of detention order by a maritime safety supervisor. To overcome this problem, therefore, the objection procedure under the Maritime Safety Act has to be reformed to reclaim a right against an inappropriate detention order measure caused by an individual's intentional act or negligence through a formal objection.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4018-4030
• /
• 2024

The in-vessel retention through external reactor vessel cooling (IVR-ERVC) strategy is a key management strategy for early termination of a nuclear severe accident that can threaten the integrity of the reactor vessel. To simulate the physical phenomena of the molten corium, the smoothed particle hydrodynamic (SPH) method is utilized in this study. The SPH method is a Lagrangian computational fluid dynamic (CFD) method that can simulate multi-fluid stratification, turbulence, natural circulation, radiative heat transfer, thermal ablation, and crust formation. To address the external vessel cooling, it is coupled with a conventional 1-D nuclear system analysis method. The 1-D system analysis code can calculate the two-phase natural circulation of cooling water and the convective heat transfer on the external reactor vessel wall. These two simulation codes exchange the temperature and heat flux of the reactor vessel outer wall. This study numerically simulated the IVR-ERVC strategy for a Korean high-power reactor and compared it with the traditional lumped parameter method (LPM). Unlike LPM, this study provides localized detailed data about the thermal hydraulic behavior of molten corium and visualization of phenomena in the IVR-ERVC strategy. This enhances our understanding of the phenomena in IVR-ERVC strategy and introduces new perspectives.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.1
• /
• pp.49-56
• /
• 2002

In this case study, results of the explosion accident at MEK-PO factory were analysed by using the consequence analysis of quantitative hazard assessment and the explosion energy, the burst pressure of vessel, and overpressures at the explosion center and at 300m distance from the explosion center were estimated, respectively. As a result, we found that a cause of accident was the runaway reaction of product(MEK-PO) because of the molecular expansion in vessel and that the possibility of the runaway reaction was classified the mechanical failure(the obstacle of refrigerator or the shutdown valve), design error, and operating error by lack of thermochemical knowledge. Also, the evasive action to prevent accident was suggested.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.173-180
• /
• 2018

Marine casualties of small fishing vessels (SFV) of less than 20 tons are frequent in Korea. The analysis was conducted to identify the cause and then prepared reduction plan using the marine casualty statistics of fishing vessels for the last five years from 2012 to 2016 by the Korean Maritime Safety Tribunal to reduce the marine casualties of SFV. According to the analysis of the type of whole vessels occurring marine casualty, fishing vessels accounted for an average 68.0 %; moreover, except for 2014 when M/V SEWOL ferry capsizing occurred, the rate of death and missing due to marine casualties occurred from 68.3 % to 91.2 % in fishing vessels, and an average 79.5 % was found to be urgent need of a measure. Marine casualties occurrence depending on the gross tonnage of fishing vessel was found that the most occurred at less than 5 tons, followed by the order of 5 to 10 tons or less. However, crews who boarded on SFV do not have any training program for them, except for the fishing safety training of fisher who carry out fishing for shipowners and crew of the coastal and offshore fishing vessel in accordance with the safety regulations for fishing vessels in the Fisheries Cooperative Association. Therefore, it is necessary to revise the training program so as to improve the preventive action and then emergency response including the fishing safety compliance with each fishery, safe navigation, machinery inspection and emergency response. Also, an SFV of less than 5 tons of 56,000 vessels is boarded by unqualified fishers. It would also be possible to consider subdividing small boat operator's certificate to enhance their qualifications. It is expected that marine casualties of SFV will be reduced if active efforts are made to improve the safety consciousness of fisher and shipowners as well as the reorganization of fishing safety training and the small boat operator's certificate system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.3
• /
• pp.242-249
• /
• 2017

In order to develop an HNS safety management system to assess and visualize hazard levels via an automated method, we have conceptualized and configured a sample system. It is designed to quantify the risk of a vessel carrying HNS with a matrix method along navigational route and indicate hazards distribution with a contour map. The basic system which provides a visualized degree of hazards in real time has been introduced for the safe navigation of HNS ships. This is useful not only for decision making and circumstantial judgment but may also be utilized for HNS safety management with a risk base. Moreover, this system could be extended to address the navigational safety of marine traffic as well as of autonomous vessels in the near future if the sensors used are connected with IoT technology.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1602-1613
• /
• 2016

Since Ballast Water Management Convention has been adopted, Ballast Water Management Convention is not effected yet. This convention will only enter into force 12 months after its ratification by 30 states, collectively representing 35% of world merchant shipping tonnnage. Morocco, Indonesia and Ghana have ratified this convention during last 29th IMO Assembly meeting which was held in November 2015. In 2016, Belgium, Fiji, Saint Lucia and Peru have become the latest countries to ratify the convention. As of now, 51 states and 34.87% combined merchant fleets are being calculated. BWM convention will be applied to not only new ships but also, existing ships after it is effected. Thus, existing vessel will be retrofitted a Ballast Water Treatment System according to D-2 Requirement until first IOPP nenewal survey after date of entry into force of the convention. Currently, about 65 BWTSs certified by Administration will be reported to IMO, even type of BWTSs is very various. Thus, a risk of each BWTS can be existed, and this existed risk can be also effected to ship's crew safety and protection of ship's own property. Therefore, we have evaluated a risk assessment for an existing vessel retrofitting an ultra violet type Ballast Water Treatment System which is mostly developed in the world. And we described the procedure of selecting a sample vessel, consequently, bulk carrier is selected because this vessel kind is mostly charged in the world. Especially, DWT 175K size is selected. Risk Assessment is using a HAZID and HAZOP method, evaluation method is referred to IMO Document "Considerated test of the Guidelines for Formal Safety Assessment (FSA) for use in the IMO rule-marking process(MSC/Circ.1203-MEPC/Circ.392)". The Risk Assessment Section is decided to 3 Nodes, Consequently, total risks have evaluated 51 items.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.567-574
• /
• 2013

Although Korea coastal area has the increasing potential marine accident due to frequent ship's encounter, increased vessel traffic and large vessel, there is no specific model to evaluate the navigating vessel's risk considering the domestic traffic situation. The maritime transport environmental assessment is necessary due to the amended maritime traffic law. However, marine safety diagnosis is now carried out by foreign model. In this paper, therefore, we suggest a domestic traffic model reflecting the characteristics of korea coastal area and navigator's risk as we named PARK(Potential Assessment of Risk) model. We can evaluate the subjective risk by establishing the model and model output into maritime risk exposure system. To evaluate this model's effectiveness, we used ship handling simulation and applied, analyzed collision accident which occurred in korea coastal area. And also, we applied integrated to an ECDIS program for monitoring traffic risk of vessels with real time based AIS data and apply to evaluate traffic risk in busan harbor waterway. As a result, we could evaluate busan harbor waterway risk effectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.138-146
• /
• 2020

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.2
• /
• pp.81-93
• /
• 2017

This study aims to investigate laws and standards(including technical guidelines) related to safety criteria for 22 kitchen machines frequently used in commercial kitchens. The study was based on literature survey, interviews with charge persons in kitchen machines manufacturing companies, cafeteria providing group meals and relevant association, and web surfing. The results showed that there are two types of safety criteria such as legally forced ones by laws and optional ones by national industrial standards or technical guidelines. High pressure safety control act, safety control and business of liquefied petroleum gas act and city gas business act prescribed gas use apparatus safety criteria, rational energy utilization act did those of pressure vessel such large rotary caldron, industrial health and safety act did those of food processing machinery, and electrical appliances safety control act did those of electrical kitchen appliances. Compulsory or optional standards or guidelines related to safety criteria for kitchen machines were presented by 22 kitchen machines. Safety devices shown in the laws, standards and guidelines were also summarized by kitchen machines and their risk factors.