A Case Study of Explosion Accident at MEK-PO Factory using Consequence Analysis

결과분석을 이용한 MEK-PO 제조공장의 폭발사고 사례연구

  • 장서일 (명지대학교 공과대학 화학공학과) ;
  • 신석주 (명지대학교 공과대학 화학공학과) ;
  • 김태옥 (명지대학교 공과대학 화학공학과)
  • Published : 2002.03.01

Abstract

In this case study, results of the explosion accident at MEK-PO factory were analysed by using the consequence analysis of quantitative hazard assessment and the explosion energy, the burst pressure of vessel, and overpressures at the explosion center and at 300m distance from the explosion center were estimated, respectively. As a result, we found that a cause of accident was the runaway reaction of product(MEK-PO) because of the molecular expansion in vessel and that the possibility of the runaway reaction was classified the mechanical failure(the obstacle of refrigerator or the shutdown valve), design error, and operating error by lack of thermochemical knowledge. Also, the evasive action to prevent accident was suggested.

Keywords

References

  1. 권혁민, 이근원, 'MEK- PO 생산공장의 폭발사고 사례', 화학공학의 이론과 응용, Vol. 6(2), pp.2825-2828, 2000
  2. 경향신문, 2000년 8월 29일자
  3. 동아일보, 2000년 8월 24일자
  4. 조선일보, 2000년 8월 24일자
  5. 한겨레신문, 2000년 8월 29일자
  6. AIChE/CCPS, 'Guidelines for Consequence Analysis of Chemical Releases', American Institute of Chemical Engineers, New York, 1999
  7. H. J Liaw, C. H. Chen, C. C. Yur, 'The Multiple Runaway-Reaction Behavior Prediction of MEK-Oxidation Reactions', Loss Prevention in the Process Industries, Vol. 14, pp.371-378, 2001 https://doi.org/10.1016/S0950-4230(01)00016-X
  8. AIChE/CCPS, 'Guidelines for Safe Storage and Handing of Reactive Material', American Institute of Chemical Engineers, New York, 1995
  9. J. L. Martin, A. Cadenato, and J M. Salla, 'Comparative Studies on the Non-isothermal DSC Curing Kinetics of an Unsaturated Polyester Resin using Free Radicals and Empirical Models', Thermochemical Acta, Vol. 306, pp.115-126, 1997 https://doi.org/10.1016/S0040-6031(97)00311-0
  10. J. L. Martin, 'Kinetic Analysis of an Asymmetrical DSC Peak in the Curing of an Unsaturated Polyester Resin Catalysis with MEKP and Cobalt Octoate', Polmer, Vol. 40, pp.3451-3462, 1999 https://doi.org/10.1016/S0032-3861(98)00556-4
  11. J. L. Martin, J. M. Laza, M. L. Morras, M. Rodriguez, and L. M. Leon, 'Study of the Curing Process of a Vinyl Ester Resin by means of TSR and DMTA', Polymer, Vol. 41, pp.4203-4211, 2000 https://doi.org/10.1016/S0032-3861(99)00631-X
  12. N. A. Eisenberg, C. J Lynch, and R. J. Breeding, 'Vulnerability Model : A Simulation System for Assessing Damage Resulting from Marine Spills', U.S. Coast Guard, CG-D-136-75 and NTIS AD-015-245, 1975
  13. V. J. Clancey, 'Diagnostic Features of Explosion Damage', 6th International Meeting on Forensic Sciences, Edinburgh, Scotland, 1972
  14. D. J. Finney, 'Probit Analysis', 3rd ed., Cambrige University Press, London, 1971
  15. W. E. Baker, J. J. Kulesz, R. E. Richer, R. L. Bessey, P. S. Westine, V. B. Parr, and G. A. Oldham, 'Workbook for Predicting Pressure Wave and Fragment Effects of Exploding Propellant Tanks and Gas Storage Vessels', NASA Scientific and Technical Information Office., NASA CR-134906, 1975