• 대한의용생체공학회:의공학회지
• /
• 제17권1호
• /
• pp.85-92
• /
• 1996

병변이 있는 판막을 대체하기 위하여 사용되는 인공판막으로는 기계식 판막, 고분자 판막 등이 있는데 고분자 판막이 기계식보다 항혈전성이 우수하므로 폴리우레탄을 이용하여 많이 연구되고 있다. 고분자 판막에는 단엽식, 삼엽식, 젤리피쉬식 등으로 제작되어 연구되고 있는데 이중 단엽식 판막은 제작이 가장 간편하고 심실내 씻김현상이 실제와 유사하며 혈류의 소용돌이 현상을 감소시킨다고 보고되고 있다. 혈압 강하를 감소시키기 위하여 고분자 판막의 두께를 얇게 할때 판막이 프레임 위 정상접촉 위치로 부터 탈구현상이 발생한다. 이것을 방지하기 위하여 2개의 지지대를 설치하여 판막의 수직변위를 최소로 하는 지지대 최적위치를 구하고, 그때 판막 끝의 수평 변위 및 판막에서의 응력분포상태를 구한 결과 최적위치는 지지대에 의해 나눠지는 3영역의 폭이 각각 6.2mm, 4.7mm, 5.1mm 일때 이고, 그때 최대 처짐이 0.19mm, 수평 최대변위가 0.047mm 이고 최대 주응력이나 등가응력의 최대치는 판막이 지지대가 접착되는 부위와 비접착 부위의 불연속점에서 발생하여 이 값들은 판막 각 영역의 폭이 커지면 증가함을 알았다.

• 대한조선학회논문집
• /
• 제38권4호
• /
• pp.11-22
• /
• 2001

프로펠러-WIG(Wing in Ground Effect)선의 상호작용 및 성능을 포텐셜 유동에 의해 해석하였다. 프로펠러는 보오텍스 격자법(VLM)을 사용하였고 WIG선은 포텐셜 기저 패널법을 사용하여 각 경계조건을 만족시키면서 반복계산을 통하여 상호작용 및 성능을 해석하였다. 자유수면은 강체로 가정하여 경상법을 사용하였다. 프로펠러-WIG의 상호작용 및 성능을 해석하기에 앞서 발표된 실험결과와 계산결과가 있는 MP101 프로펠러와 MR-21 타의 상호작용 및 성능해석을 수행하여 개발된 프로그램의 정도를 검증하였다. 프로펠러-WIG선의 상호작용해석은 프로펠러의 부착위치, 직경 및 회전수의 변화에 따른 비행고도 높이 변화에 대한 양력 및 피치모멘트를 계산하여 비교하였다. 날개 앞에 부착된 프로펠러는 WIG선의 양력을 급격히 향상시키며 정적안정성을 향상시킴을 알았다. 따라서 적절한 프로펠러의 크기, 부착위치 및 회전수의 선택이 PARWIG선의 성능향상을 위해 필수적임을 알았다.

• 한국해양공학회지
• /
• 제25권5호
• /
• pp.15-20
• /
• 2011

This study carried out a series of experiments involving impact tests (Drop Weight type & Charpy type with a standard specimen and newly designed I-type specimen), hardness tests, and fracture surface observations of French-made roll shell steel (F), abnormal roll shell steel (M), reheated roll shell steel (R), and S25C steel under heat treatment conditiAn experimental study was carried out to study the solid-liquid mixture upward hydraulic transport of solid particles in vertical and inclined annuli with a rotating inner cylinder. The lift forces acting on a fluidized particle play a central role in many important applications such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, sediment transport, the cleaning of particles from surfaces, etc. In this study a clear acrylic pipe was used to observe the movement of solid particles. Annular velocities varied from 0.4 to 1.2 m/s. The effect of the annulus inclination and drill pipe rotation on the carrying capacity of a drilling fluid, particle rising velocity, and pressure drop in a slim hole annulus were measured for fully-developed flows of water and aqueous solutions of CMC (sodium carboxymethyl cellulose) and bentonite. The rotation of the inner cylinder was efficient at carrying particles to some degree. For a higher particle volume concentration, the hydraulic pressure loss of the mixture flow increased because of the friction between the wall and solids or between solids.

• 동굴
• /
• 제72호
• /
• pp.19-30
• /
• 2006

본 연구의 목적은 한탄강유역의 지질 및 지형정보를 제공하려는 것이다. 추가령 열곡과 관련이 있는 이 지역에는 선지형, 원지형, 차지형으로 구분하는 것이 가능하다. 또한 단구의 분포도 연구지역을 통하여 잘 나타난다. 결론적으로 보면 한탄강 유역에는 화산활동에 의해 용암대지가 형성되었으며 이 지역에 나타나는 백의리층은 용암층 밑의 하상 역을 의미한다. 하계패턴의 발달은 불안정하며, 분기율, 하천길이비율 등은 다른 하천에 비해 낮다. 단구의 높이는 $5{\sim}25m$ 정도이고 대부분이 충적단구이다. 직탕폭포지역은 기반암인 화강암위에 용암대지가 덮혀있다 구침식면지역은 수평용암대지 보다 경사가 급하나 고석정 지역의 지형은 직탕폭포 부근과는 다르다. 기반암이 화강암인 것은 직탕폭포 주변과 동일하나 하천의 횡단면이 비대칭적인 것이 특징이다.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.476-483
• /
• 2016

Super Wi-Fi is a Wi-Fi-like service exploiting TV white space (WS) which is expected to achieve larger coverage than today's Wi-Fi thanks to its superior propagation characteristics. Super Wi-Fi has been materialized as an international standard, IEEE 802.11af, targeting indoor and outdoor applications, and is undergoing worldwide field tests. This paper demonstrates the true potential of indoor Super Wi-Fi, by experimentally comparing the signal propagation characteristics of Super Wi-Fi and Wi-Fi in the same indoor environment. Specifically, we measured the wall and floor attenuation factors and the path-loss distribution at 770MHz, 2.401 GHz, and 5.540 GHz, and predicted the downlink capacity of Wi-Fi and Super Wi-Fi. The experimental results have revealed that TVWS signals can penetrate up to two floors above and below, whereas Wi-Fi signals experience significant path loss even through a single floor. It has been also shown that Super Wi-Fi mitigates shaded regions of Wi-Fi by providing almost-homogeneous data rates within its coverage, performs comparable to Wi-Fi utilizing less bandwidth, and always achieves better spectral efficiency than Wi-Fi. The observed phenomena imply that Super Wi-Fi is suitable for indoor applications and has the potential of extending horizontal and vertical coverage of today's Wi-Fi.

• 한국조경학회지
• /
• 제29권1호
• /
• pp.124-130
• /
• 2001

We have increasing number of new ponds planned and designed in traditional styles. However, many of the stoneworks at the edges of those new ponds are not the characteristics of our traditional ponds. This study is aiming at surveying and analysing the building techniques of Korean traditional water edges built with stones, by investigating selected ponds in royal palace gardens. This study was conducted through field investigation and literature reviews. Nine ponds from Gyongbok Palace, Changdeok Palace, and Changgyong Palace, which have many well-preserved ponds of various styles, were surveyed. First of all, the building materials (stones), or the kinds and sizes of stones used for the edges of ponds were surveyed. Secondly, construction methods, or the height and techniques of buildings stone walls were surveyed. Major findings were, first, the edges of most ponds constructed with granite Jangdaeseok, usually 120cm-140cm long, and 30cm-40cm thick. The only exceptions were those ponds which seemed to have been influenced by Japanese style. Second, typical pond ages were up-right vertical walls. Granite jangdaeseoks were piled-up 2 stories or up to six stories. Exceptions were Bandoji Pond and Chundangji Pond which had been constructed during latest period(King 'Ghojong' period). Third, heith of stone walls were between 60cm and 220cm. The depth of ponds were about 150cm or less, and the rest of the edge wall height was freeboard. Though the results of this study was not made by precise investigation and actual measurement, they could be fundamental information and data for the traditional styles of the Chosun dynasty Palace. It is believed that continuous researches on this matter will result in important and fundamental data of the establishment of traditional water edges.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.396-401
• /
• 1999

In this study, $Ar^+$ ion laser etching process of single/poly-crystalline Si with $CCl_2F_2$ gas is investigated for MEMS applications. In general, laser direct etching process is useful in microelectronic process, fabrication of micro sensors and actuators, rapid prototyping, and complementary processing because of the advantages of 3D micromachining, local etching/deposition process, and maskless process with high resolution. In this study, a pyrolytic method, in which $CCl_2F_2$ gasetches molten Si by the focused laser, was used. In order to analyze the temperature profile of Si by the focused laser, the 3D heat conduction equation was analytically solved. In order to investigate the process parameters dependence of etching characteristics, laser power, $CCl_2F_2$ gas pressure, and scanning speed were varied and the experimental results were observed by SEM. The aspect ratio was measured in multiple scanning and the simple 3D structure was fabricated. In addition, the etching characteristics of $6\mum$ thick poly-crystalline Si on the insulator was investigated to obtain flat bottom and vertical side wall for MEMS applications.

• 한국가구학회지
• /
• 제20권5호
• /
• pp.467-479
• /
• 2009

The high-tech computer technology developments have greatly affected the area of design education. Starting from the mid 80s, innovations in visual presentation methods have heightened with 2D computer graphic programs, CAD & 3D modeling, and Rapid Prototype that allows dimensional generation. The specialty and quality in design studio education have advanced due to the development in presentation methods such as Power Point and Keynote. But there are many problems with the current method of presenting the visual outcome in a data format using beam projectors, which is a vertical presenting method compared to the old studio study method of conducting discussions and reviews based on the substantial outcome. The essence of studio study that allows for comparisons and analysis by horizontally opening up the various work outcomes is being offset. Also the requirement for manual idea sketching work that plays an important role in the initial design phase continuing to decrease due to the digital working process dependence and cumbersome procedures in the presentation. In order to resolve this problem, the CALM system (Class Applied LCD Modular System) has been developed that replaces the method of attaching the sketches or renderings on the wall with a digital multi-display system. In a nutshell, individuals will upload the outcomes online and display them on the CALM system studio that is composed of 32 LCD (Columns: 4 $\times$ Rows: 8) monitors that are 19 inches in size so that various personnel can openly study the design outcomes. Also the central 42 inch PDP monitor that offers touch pad capability allows each design outcome to be described and examined by expanding. The concept phase of this development process has elevated to the production of an operating prototype that is being reviewed of its practicality. It is considered that the development of this system will decrease the extreme tendency of depending on digital operation but achieve revitalization of a more realistic and opened studio study environment compared to the individual consulting method of the old study approach.

• 한국해안·해양공학회논문집
• /
• 제27권6호
• /
• pp.443-451
• /
• 2015

유수실을 두 개 가지는 유공케이슨에 작용하는 파력 산정식은 아직까지 없다. 이 연구에서는 이러한 이중유수실 케이슨 모형에 작용하는 파력을 측정한 수리실험 자료 분석 결과를 제시하였다. 실험결과로부터 세 가지 연직벽체에 작용하는 파력의 첨두값에 연관된 다섯 가지 파의 위상에 따른 파력의 변화 양상을 명확하게 규명할 수 있었으며, 이로부터 Takahashi and Shimosako (1994)와 유사한 형태의 이중유수실 파력보정계수를 산정하였다. 이 결과는 향후 추가 실험 및 현장 실무에의 적용을 통해 검증될 필요가 있다.

• 자원환경지질
• /
• 제7권4호
• /
• pp.157-173
• /
• 1974

The Red Hill deposit of the Dongjom Copper Mine is the most promising deposit of the mine and under intensive exploration at present although there are eight more deposits of vein type. With total 2160m drilling of 9 holes completed and 400m drilling on two holes underway, the nature of the Red Hill deposit has come more clear. The copper content in the whole ore body is meager so far as the exploration done up to present indicates, but there are evidences that mineralization covers all over the granodiorite cupola at the Red Hill area. The petrological work and assay on the samples taken by the writers indicate that granodiorite rocks can be divided into fresh zone and alteration zone. Alteration zone consists of potassic and argillic zones accompanyied by silicification zone on basis of Lowell and Guilbert model Argillic zone has closely related with a mineralization in the Red Hill deposit. It has been cleared that the alteration acompanyied with the mineralization took place not only &long vertical fissures but also in the irregular lateral zone, the nature of which is unknown. Judging from the results of exploration and petrochemical study on the Red Hill deposit which is imbedded in a southern part of the granodiorite cupola, it can be concluded by the writer's opinion that the Red Hill deposit is possibly a porphyry copper deposit, because the shape of the ore body, mineral zoning and paragenesis and wall rock alteration resemble to those of typical porphyry copper deposits. It is the writers' opinion that more exploration work is required so as to evaluate the deposit.