• Journal of Advanced Research in Ocean Engineering
• /
• 제3권2호
• /
• pp.53-58
• /
• 2017

This study introduces the case of pipelines installed in subsea conditions and buried offshore. Such installations generate pore water pressure under the seabed because of cyclic wave excitation, which is an environmental load, and consistent cyclic wave loading that reduce the soil shear strength of the seabed, possibly leading to liquefaction. Therefore, in view of the liquefaction of the seabed, stability of the subsea pipelines should be examined via calculations using a simple method for buried subsea pipelines and floating structures. Particularly, for studying the possible liquefaction of the seabed in regard to subsea pipelines, high waves of a 10- and 100-year period and the number of occurrences that are affected by the environment within a division cycle of 90 s should be applied. However, when applying significant wave heights (HS), the number of occurrences within a division cycle of 3 h are required to be considered. Furthermore, to research whether dynamic vertical load affect the seabed, mostly a linear wave is used; this is particularly necessary to apply for considering the liquefaction of the seabed in the case of pile structure or subsea pipeline installation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.213-220
• /
• 2010

This study presents a numerical simulation model of vertical ground heat exchangers, considering unsaturated hydro static ground conditions induced by the ground water table fluctuation. Heat transfer in ground and grout is modeled by a 3-D FEM transient conductive heat transfer model, where heat transfer between circulating fluid and heat exchanging pipe is treated as 1-D quasi steady state forced convective elements. To take into account the unsaturated ground condition, soil thermal conductivity and heat capacity which are dependent on the matric suction are applied to ground elements. Parametric studies considering various ground water table conditions are conducted to investigate the influence of unsaturated hydro static ground condition on the mean heat exchange rate of ground heat exchanger. Simulation results considering water table fluctuation show 60~100% of mean heat exchange rate for a saturated soil condition and 125~208% of that for a dry soil condition. Thus consideration of unsaturated soil condition is substantially recommended for more accurate design and performance evaluation for ground heat exchangers.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.17-19
• /
• 2010

This paper describes the possibility of the raft thickness reduction for mega foundations system of super high-rise buildings through a case study on domestic and foreign super high-rise buildings. In case of super high-rise buildings, the size of foundations, especially raft becomes wider and deeper because of heavy upper load. It is difficult to pour concrete of this kind of mega foundation, and cracks by hydration heat could happen. Therefore, there are several ways to reduce the raft thickness of mega foundations. Piled-raft could be the one because moment and shear load that the raft subjects on by soil reaction are lower. The effect of the piled-raft foundation on the raft thickness reduction could be confirmed by comparison of super high-rise buildings with pile, piled-raft and mat foundation. Furthermore, it was showed that the raft thickness could be more reduced by locating piles right under the vertical members of super structures.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.9-20
• /
• 2002

본 연구의 목적은 비선형 흙-구조물 상호 작용문제를 연구하기 위한 계산 절차를 개발하는 것이다. 흙-구조물 상호 작용 거동을 연구하기 위하여 연직과 수평하중을 동시에 받은 대상기초와 강널말뚝으로 보강된 기초지반에 대한 유한 요소 수치해석을 하였으며 흙과 기초구조물 사이의 상호작용 거동을 모델하기 위하여 접합요소를 사용하였다 주 해석 결과는 다음과 같다. 1. 침하와 측방변위의 예측에 대해서는, 접합요소를 사용한 결과가 더 큰 값을 얻었다. 2. 극한지지력 결정에 대해서는 접합요소를 사용한 경우가 약 12%정도 더 작게 나타났다 3. 대상기초의 수평과 연직변위는 접합요소의 영향을 받았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.918-923
• /
• 2003

Reinforced concrete deep beams are commonly used in many structural applications, including transfer girders, pile caps, foundation walls, and offshore structures. The existing design methods were developed and calibrated using normal strength concrete test results, and their applicability th HSC deep beams must be assessed. For the shear strength prediction of high-strength concrete(HSC) deep beams, this paper proposed Softened Strut-and-Tie Model(SSTM) considered HSC and bending moment effect. The shear strength predictions of the refined model, the formulas the ACI 318-02 Appendix A STM, and Eq. of ACI 318-99 11.8 are compared with the collected experimental data of 74 HSC deep beams with compressive strength in the range of 49-78MPa . It is shown the shear strength of deep beam calculated by those equations are conservative on comparing test results. The comparison shows that the performance of the proposed SSTM is better than the ACI Code approach for all the parameters under comparison. The parameters reviewed include concrete strength, the shear span-depth ratio, and the ratio of horizontal and vertical reinforcement. The proposed SSTM gave a mean predicted to experimental ratio of 0.99, 32 percent higher than ACI 318-02 Code, however with the low coefficient variation.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.98-106
• /
• 2013

Seismic fragility curves for an offshore wind-turbine structure were obtained. The dynamic response of an offshore wind turbine was analyzed by considering the nonlinear behavior of layered soil and the added mass effect due to seawater. A pile-soil interaction effect was considered by using nonlinear p-y, t-z curves. In the analysis, the amplification effect of ground acceleration through layered soil was considered by applying ground motion to each of the soil layers. The vertical variation in ground motion was found by one-dimensional free-field analysis of ground soils. Fragility curves were determined by damage levels in terms of tower stress and nacelle displacements that were found from static pushover analysis of the wind-turbine structure.

• 교육시설
• /
• 제10권3호
• /
• pp.5-13
• /
• 2003

This paper is a series of study for the development of rural elementary school facilities model applying to the regional characteristics. Therefore, main theme of this paper is to pile up and analysis of elementary school facilities data in Po Cheon through a series of actual survey and interview with teachers. The results are summarized as follows ; First of all, in case of Po Cheon, it needs to study for urban model type as well as rural elementary school facilities model type. Second, extension type of buildings has separated as three types-zigzag extension type, vertical & horizontal extension type, separate building type. But another characteristics, such as type of site plan, type of corridor and module of classroom unit, outdoor space and elevation design, are monotonous. Third. the results of this analysis show that it is desirable to locate houses for teachers within boundaries. Finally, the future paper needs to be studying more various module of classroom unit, extension type, space program, type of floor plan and site plan.

• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.109-120
• /
• 1994

해안지역에서 토류구조물을 축조하는 동안에 직면하게 되는 문제점중의 하나는 연약점토지반의 안정화 대책이다. 본 연구는 성토제체 축조시 연약점토지반의 안정화를 위하여 시멘트 개량 말뚝으로 보강된 연약지반의 거동효과를 구명하고자 원심모형실험을 수행한 것으로 서로 다른 조건에 대해서 단계 하중하에서 시간에 따른 보강지반과 비보강지반의 침하와 융기거동을 고찰하였다. 실헙결과 지반의 수직침하감수 제방에 인접한 지표면의 융기감소는 개량말뚝의 강도, 점토의 함수비 그리고 특히 개량면적비에 크게 영향을 받는 것으로나타났다.

• 한국해양공학회지
• /
• 제38권2호
• /
• pp.74-85
• /
• 2024

Offshore wind turbines are supported by various foundations, each with its considerations in design and construction. Gravity, monopile, and suction bucket foundations encounter geotechnical issues, while jacket and tripod foundations face fatigue problems. Considering this, a gravity foundation based on a steel skirt was developed, and a monopile foundation was analyzed for Pile-Soil Interaction using the p-y curve and 3D finite element method (3D FEM). In addition, for suction bucket foundations, the effects of lateral and vertical loads were analyzed using 3D FEM and centrifuge tests. Fatigue analysis for jacket and tripod foundations was conducted using a hotspot stress approach. Some hybrid foundations and shape optimization techniques that change the shape to complement the problems of each foundation described above were assessed. Hybrid foundations could increase lateral resistance compared to existing foundations because of the combined appendages, and optimization techniques could reduce costs by maximizing the efficiency of the structure or by reducing costs and weight. This paper presents the characteristics and research directions of the foundation through various studies on the foundation. In addition, the optimal design method is presented by explaining the problems of the foundation and suggesting ways to supplement them.

• 한국지반공학회논문집
• /
• 제34권3호
• /
• pp.43-56
• /
• 2018

해상처분장의 호안구조물 및 연직차수공으로 강관시트파일이 주로 사용되며, 강관시트파일은 이음부를 연결하여 주열식으로 설치가 되는 만큼 해상 고유의 횡방향 외력에 대한 구조적인 안정성이 확보되어야 한다. 본 연구의 목적은 새로 개발된 연직차수공 이음부의 구조적인 성능을 평가하는 것이다. 먼저 기존 연직차수공 이음부의 문제점을 고찰하고 시공 및 유지보수 측면에서 기존 이음부 형식과의 차별성을 갖도록 새로운 형태의 DHLT(Double H with L-T) 연직차수공 이음부를 개발하였다. 개발된 DHLT 이음부의 실규모 모형을 제작하고 이음부에 그라우트를 채워 양생시킨 후 압축 및 인장강도실험을 수행하고 그 결과를 기존 연구결과와 비교하였다. 실험결과, DHLT 이음부의 압축강도와 인장강도는 그라우트와 강재의 영향으로 인해 기존 이음부 연구결과에 비해 다소 과소평가되었다. 특히 압축강도 실험의 경우 DHLT 이음부의 비대칭 형상으로 인해 그라우트에 균열이 발생하기 전에 강재에서 먼저 항복이 발생하는 결과를 나타내었다. 본 연구를 통해 연직차수공 개발시 이음부 강도발현에 영향을 끼칠 수 있는 요인을 파악할 수 있었으며, 이를 근거로 더 향상된 연직차수공을 개발할 수 있을 것으로 기대된다.