• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.412-421
• /
• 2018

The Line array sonar consisting of several hydrophones increases array gain and improves the performance for detecting the direction of the target compared to single hydrophone. However, line array sonar produces the bearing error that makes it difficult to determine the bearing of incoming source signal due to the relation between bearing angle of target and vertical angle of multipath signals. Vertical angles of multipath are varied with the geometry of receiver and target and various underwater environments, therefore it is necessary to consider the bearing error to estimate accurately the bearing of the target. In this study, acoustic modelling was performed to understand the effect of multipath signals on the target signal. The errors of bearing angle estimated from the bottom bounced signals are calculated with several environment. In addition, the expected bearing line, as a function of source-receiver range, compensated for the bearing error is predicted from the estimated bearing angle.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.2
• /
• pp.55-64
• /
• 2003

Underwater acoustic noise measurement is an essential element for vulnerability assessment of modern naval platforms. But during the last few decades environmental conditions have drastically changed due to the gradually increasing sea ambient noise level and decreasing submarine radiated noise level. A real-time underwater acoustic measurement system with vertical line array is designed for the quiet submarine radiated noise assessment in challenging environment. This system has a constant directivity index in measurement frequency range and accurate tracking capability for the transmission loss compensation and navigation aids inside the submarine. This system has been validated at sea and used several times for the submarine noise measurement.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.193-198
• /
• 2005

NOR type flash 32 ${\times}$ 32 way are fabricated by using the typical 0.35 ${\mu}{\textrm}{m}$ CMOS process. The structure of array is the NOR type with common source line. In this paper, optimized program and erase voltage conditions are presented to realize multi-bit per cell at the CSL-NOR array. These are considered selectivity of selected bit and disturbances of unselected bits. Retention characteristics of locally trapped-charges in the nitride layer are investigated. The lateral diffusion and vertical detrapping to the tunneling oxide of locally trapped charges as a function of retention time are investigated by using the charge pumping method. The results are directly shown by change of the trapped-charges quantities.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1479-1486
• /
• 2000

This paper introduces the improved moving frame acoustic holography (MFAH) method and its application. MFAH allows us to visualize the noise generated by moving noise sources by employing a vertical line array of microphones affixed to the ground. The sound field generated by moving sources is different from that of stationary ones due to the movement of the sources. Therefore the measured sound pressure by the microphone on the ground has to be processed so that it cooperates the effect of the movement. This paper discusses the effect of moving noise sources on the obtained hologram by MFAH. This assures the applicability of MFAH to the visualization of moving sources. This paper also reviews the improved MFAH that can visualize a coherent narrow band noise and a pass-by noise. The practical applicability of the improved MFAH was demonstrated by visualizing tire noise during a pass-by test.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.2
• /
• pp.45-54
• /
• 2003

The radiated-noise of combat ship is very important in the point of detection and vulnerability assessment. Therefore several kind of underwater acoustic measurement method has been developed. This paper reviews the various measurement concepts and proposes a procedure to select the better one under consideration of measurement conditions. And this paper recommends the portable drift type, which has vertical line array, as the most efficient measurement method in Korean sea.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1057-1066
• /
• 2001

This paper describes a design for linear polarization antenna using the EMCD (electromagnetically coupled dipole). The analysis and the design of model antennas are conducted by FDTD method. Vertical and horizontal linear polarizations are easily obtained by variation of dipole position. In 1-element antenna design, mutual coupling between microstrip feed line and radiator is considered. Design parameters of each 1-element antenna with vertical and horizontal polarization are used for array design. Radiation power and main beam tilting angle can be controlled by the offset and the distance between radiating elements in an array, respectively. 5-element array antennas are fabricated and measured to prove the design validity. The results of FDTD simulation and measurement show the reasonable agreement.

• Journal of KSNVE
• /
• v.10 no.4
• /
• pp.669-678
• /
• 2000

This paper reviews the improved moving frame acoustic holography (MFAH) method and its application. Moving frame acoustic holography was originally proposed to increase the aperture size and the spatial resolution of hologram by using a moving line array of microphones. The hologram of scanned plane can be obtained by assuming the sound field to be product of spatial and temporal information. Although conventional MFAH was only applied to sinusoidal signals, it allows us to visualize the noise generated by moving noise sources by employing a vertical line array of microphones affixed to the ground. However, the sound field generated by moving sources becomes different from that of stationary ones due to the movement of the sources. Firstly, this paper introduces the effect of moving noise sources on the obtained hologram by MFAH and the applicability of MFAH to the visualization of moving sources. Secondly, this paper also reviews improved MFAH that can visualize a coherent narrow band noise and a pass-by noise. The practical applicability of the improved MFAH was demonstrated by visualizing tire noise during a pass-by test.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.659-663
• /
• 2009

In this paper, we propose a rectification method that can convert ray space data obtained by controlled camera array to ideal data. Here, Ideal data is obtained by getting longitudinal and transversal epipolar line between cameras vertical and horizontal. However it is actually difficult to arrange cameras strictly because we arrange cameras by hand. As conventional method, we have use camera-calibration method. But if we use this method there are some errors on the output image. When we generate arbitrary viewpoint images this error is critical problem. We focus attention on ideal trajectory of characteristic point. And to minimize the error directly we parallelize the real one. And we showed usefulness of proposed technique. Then using the proposed technique, we were successful reducing the error to less than 0.5 pixels.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.9-17
• /
• 2016

We demonstrate a time- and wavelength-division multiplexed passive optical network system employing a vertical-cavity surface-emitting laser array-based optical line terminal transceiver and a tunable bidirectional optical subassembly-based optical network terminal transceiver. A packet error-free operation is achieved after a 40 km single-mode fiber bidirectional transmission. We also discuss an arrayed waveguide grating, a photo detector array based on complementary metal-oxide-semiconductor photonics technologies, and low-cost key devices for deployment in access networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.128-131
• /
• 2000

This paper describes design for dual-linear polarization antenna using EMC(electromagnetic-coupled) dipole. EMC dipole has a simple element structure and it is fed by microstrip line. Vortical and horizontal polarization are determined by structure of dipole fed by microstrip line. FDTD Method is used for an analysis of antenna element. Length, width, height and offset of dipole are designed for 1-element antenna. Resonant length of diploe differs from the calculated value by a formula because of coupling effect of dipole and feed line. Radiation Power is controlled by the offset of dipole. In prectical fabrication of antenna array, a constant height of dipoles is required. Therefore, the teflon plate with height of 0.8 mm is considered in antenna element design for the vertical polarization.