• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.69-74
• /
• 2011

This paper deals with the detail rotordynamic analysis for the vertical rotor system as development of vertical sea water lift pump for FPSO deep well. In a vertical rotor system, since linearized stiffness and damping coefficients of fluid film bearing are no longer be valid, hence the transient response analysis considering a fluid film force for every journal position in the bearing needs to be required. In this study, the transient response analysis of the proposed vertical pump rotor system was carried out in dry-run and wet-run conditions, respectively. The results show that orbital vibration responses of the rotor system remain stable at rated speed and thereby operating reliability of the vertical rotor system is confirmed. To overcome complexity of calculation pr ocedure and time consuming calculation of transient analysis, the calculating technique of steady-state response analysis is also proposed. The results of steady-state response obtained by applying the proposed technique to the rotor system are good agreement with the reference results, that is, transient responses.

• 한국건설관리학회논문집
• /
• 제2권2호
• /
• pp.47-58
• /
• 2001

고층건물공사 현장물류계획은 수직이동계획과 수평이동계획으로 구분할 수 있다. 수평이동계획의 내용은 상대적으로 선행 프로세스인 수직이동계획 과정에서 결정되는 양중장비계획 등에 의해서 제약을 받는다. 현재 국내 건설업체들은 마감자재에 대한 이동계획과 관련해서 약산식을 사용한 가설 리프트 대수 산정, 마감자재별 물량을 양중회수로 치환하는 방법의 부재, 유사현장 사례 비교 방법의 문제점, 양중장비계획의 적정성 검토 방법의 부재, 형식적인 수평이동계획, 수직$\cdot$수평이동계획의 단절 등의 문제점을 가지고 있다. 그리고 이러한 문제점들로 인하여 수직$\cdot$수평이동계획자는 양중장비의 대수, 사용기간, 마감자재의 야적 등에 대해서 합리 적으로 의사결정을 내리지 못하고 있다. 본 연구에서는 계획자로 하여금 고층건물공사 마감자재의 수직$\cdot$수평이동계획을 통합하여 합리적으로 계획할 수 있는 의사 결정모델을 제안하고 있으며, 이 모델을 현업의 수직$\cdot$수평이동계획 과정과 비교하고 있다. 그리고 이 모델을 사용하는 계획자는 자신의 사고의 틀을 결과지향적 사고에서 과정지향적 사고로 변화시키는데 활용할 수 있고, 계획 시 직면하게 되는 한정된 자원 및 동태적 상황 등에 적절하게 대응할 수 있으며, 고층건물공사 마감자재의 수직$\cdot$수평이동계획에 대한 시스템 사고 등이 가능하다.

• 대한수학회논문집
• /
• 제36권1호
• /
• pp.135-147
• /
• 2021

In this paper, we introduce the harmonicity of a covector field on a Riemannian manifold (M, g) to its cotangent bundle T∗ M equipped with g-natural metric. Afterward we also construct some examples of harmonic covector fields.

• Structural Engineering and Mechanics
• /
• 제30권1호
• /
• pp.21-36
• /
• 2008

The static response of a finite beam resting on a tensionless Pasternak foundation and subjected to a concentrated vertical load is assessed in this study. The concentrated vertical load may be applied at the center of the beam, or it may be offset from the center. The tensionless character of the foundation results in the creation of lift-off regions between the beam and the foundation. An analytical/ numerical solution is obtained from the governing equations of the contact and lift-off regions to determine the extent of the contact region. Although there is no nonlinear term in the equations, the problem shows a nonlinear character since the contact region is not known in advance. Due to that nonlinearity, the essentials of the problem (the coordinates of the lift-off points) are calculated numerically using the Newton-Raphson technique. The numerical results are presented in figures to illustrate the behaviours of the free-free and pinned-pinned beams under symmetric or asymmetric loading. The figures illustrate the effects of the shear foundation parameter and the symmetric and asymmetric loading options on the variation of the contact lengths and the displacement of the beam.

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.113-121
• /
• 2005

How to extimate the angle of attack of a vertical V-type cambered otter board was described. A three-dimensional semi-analytic treatment of a towing cable system was applied to the field experiments of a midwater trawl obtained by the Scanmar system. Also the equilibrium condition of the horizontal component and vertical component of forces and moment around the otter board was used. When the warp length was 300m long and the towing speed was between 2.61 and 3.86 knots, the estimated angle of attack of the otter board was ranged between $24.7^{\circ}$ and $26.2^{\circ}$, though the maximum lift force was at the angle of attack $22^{\circ}$.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.521-523
• /
• 2004

The Japan Aerospace Exploration Agency (JAXA) has proposed new vertical take-off and landing (VTOL) aircraft known as the Jet-VTOL aircraft shown in Fig.1. The Jet-VTOL aircraft is based on a canard wing configuration. The aircraft has the clustered lift-fans mounted near the center of gravity for vertical flight, and has the clustered fans mounted beside the vertical tail for cruise flight. Both fans are driven by the core engine mounted inside the aft end of fuselage. The propulsion system is innovative and attractive not to be seen even in the world.

• Archives of Plastic Surgery
• /
• 제39권1호
• /
• pp.67-70
• /
• 2012

Massive weight loss results in skin excess, leading to an unsatisfying body contour. Various thigh lift procedures can correct flabby skin in the lower leg. We present a lower body contouring technique with a report on two patients. The procedure is determined by the body contour of the patient. As the skin excess in the thigh area tended to appear mostly on the medial side, a vertical medial thigh lift was considered. Moreover, for patients with a pear/guitar-shaped body contour, we added the spiral thigh lift for skin excess in the buttocks and the lateral thigh area. The extent of tissue to excise was determined by pinching the patient in a standing position. The inferior skin flap was fixed to non-movable tissue, which was helpful for lifting the tissue and preventing the widening of the scar. After the operation, a drain was kept for 3 to 4 days. A compressive garment was used after removing the drain. There were no complications. The patients were discharged 6 to 8 days after the operation. In conclusion, skin excess, especially in the lower body, can be corrected by a thigh lift combining several procedures, varying from person to person.

• 조명전기설비학회논문지
• /
• 제13권4호
• /
• pp.152-159
• /
• 1999

본 논문에서는 교류전압 인가시 모의 GIS내에 존재하는 금속이물의 거동현상에 대해 연구하였다. 평행평판 전극을 내장한 가스챔버를 설계·제작하고, 전국내 선형 및 구형의 금속이물에 대해 부상전압을 계산 및 측정하였다. 또한 각각의 금속이물에 대전되는 전하량을 계산하였다. 고속카메라를 이용하여 금속이물의 종류 및 인가전압에 따른 거동양상과 부상시간, 부상높이 등의 거동특성을 분석하였다. 전계인가시 금속이물의 대전 전하량은 금속이물의 크기에 따라 증가하며, 부상전압은 서형 및 구형 금속이물의 직경에 큰 양형을 받는 것으로 나타났다. 금속이물의 부상이후 부상전압 부근의 전압에서의 선형 금속이물은 후 전극과 거의 수직인 상태로 상하 왕복운동을 하며, 거의 수직상태로 움직이는 거동 형태를 나타내었다. 절연파괴전압에 가까운 전압에서는 금속이물은 부상 중에 수회 수직회전을 반복하며, 장시간 부유하였다.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.91-98
• /
• 2008

One of the two spindles in the X-lift fractured suddenly during normal operation. The fracture occurred at the notch where the bending moment might be the maximum. Macrofractographic features associated with rotating-bending fatigue are evident on the fracture surface. The 3-D finite element analysis of the X-lift reveals that the spindle rotated under bending. The measured surface strain of the spindle varies cyclically as the spindle rotates. It supports that the spindle rotated under bending. The X-lift is not perfectly symmetrical with respect to both the horizontal and the vertical plane. The slightly unsymmetrical deformation can cause the bending of the spindle.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제29권1호
• /
• pp.63-68
• /
• 1990

Let M be a differentiable manifold, TM its tangent bundle and FM its frame bundle. The theory of complete lifts and Horizontal lifts to FM of vector fields on M ahs been studied by many authors. Tn this paper, vertical lifts of functions vector fields md 1-forms on M to FM are studied.