• 대한치과교정학회지
• /
• 제31권2호통권85호
• /
• pp.187-197
• /
• 2001

전통적 교정술식인 edgewise technique으로 치료한 경우 잔여성장, 안모 유형과 발치 여부가 안모고경에 미치는 영향과 요소를 알아보고자 165명을 대상으로 조사하였다. 이 대상군들은 SN-GoGn angle, Frankfort mandibular plane angle, Occluso-mandibular plane angle을 이용하여 수직 비발치군, 수직 발치군, 수평 비발치군, 수평 발치군으로 구분하였다. 치료 전후에 두부계측방사선사진을 계측하고 통계처리하여 다음과 같은 결론을 얻었다. 1.모든 군에서 치료 후의 전하안모고경, 전안모고경, 후안모고경이 유의하게 증가하였으며 상하악 구치고경이 유의하게 증가하였다. 2. 치료 전후의 안모고경 변화에서 수직, 수평 안모 유형 간에 유의한 차이는 인정되지 않았다. 3. 발치군과 비발치군 간의 안모고경 변화는 유의한 차가 없었다. 4. 전하안모고경의 변화량이 성장군에서 상악 구치고경의 변화와, 성인군에서 하악 구치고경의 변화와 유의한 상관성을 보였다. 5. 전하안모고경의 변화량에 영향을 미치는 요소는 뚜렷하지 않았다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권5호
• /
• pp.340-345
• /
• 2009

Purpose: The purpose of this study was to evaluate the surgical success of bone reconstruction of the severely atrophic maxilla using autogenous block bone onlay graft from the ramus and ilium prior to dental implantation. And we measured the amount of vertical height change Material and Methods: 26 partially edentulous patients(32 case) who needed block onlay bone graft before implant placement in posterior maxillary area from 2002 to 2009 were selected for this study. Patients consisted of 20 males & 6 females and the average of their age was 54.2. Patients who were treated with ramal bone were 19 case and patients who were treated with iliac bone were 11 case. Digital panoramic X-ray was taken at the day of surgery, 3 months and 6 months later after the surgery. Vertical height change & resorption rate of grafted bone were measured with the same X-rays and compared Results: Two out of 32 bone grafts had to be removed because of inflamation at the grafts area(97.3%). The mean of radiographic vertical height change(change rate) of post-op. 3 month was 0.54mm(8.5%)and 6 month was 0.99mm(15.9%). Compairing to intraoral donor site(ramus), iliac bone had more vertical height change(1.18mm) at 6 month after surgery. Conclusions: Within the limit of this study, autogenous block onlay grafts can be considered a promising treatment for severely atrophic maxilla.

• 국제초고층학회논문집
• /
• 제11권2호
• /
• pp.75-86
• /
• 2022

High-rise buildings often can accommodate the population of small horizontal cities. The investment in high-rise buildings is considerable and therefore a rapid return on investment is necessary. The immediate availability of high-rise buildings can be achieved by automated prefabrication of highly finished modules and their instant on-site assembly by robotic and automated construction sites. A high-rise building as a vertical city can be considered as a sophisticated organism that can constantly change throughout its lifecycle in response to economic growth, demographic change, and environmental pressures. To date, many new urban high-rise developments claim to be "vertical cities", yet few represent this important characteristic. This article analyzed the technological readiness and innovations in the field of construction automation and robotics including single-task construction robots, automated on-site construction factories, and ambient assisted living. These technological advances enable the realization of future vertical cities that are able to continuously grow and transform in terms of form and function. Finally, the article proposes a visionary archetype of vertical city in the name of "dynamic vertical urbanism" that is easy to expand vertically and horizontally in order to achieve instant availability and full life cycle resilience thanks to advanced building technologies.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1095-1101
• /
• 1995

Numerical analysis of vertical solidification process allowing solid-liquid density change is performed by a hybrid method between a winite volume method (FVM) and a finite element method (FEM). The investigation focuses on the influence of solid-liquid density change and cooling rates on the motion of solid-liquid interface, solidified mass fraction, temperatures and thermal stresses in the solid region. Due to the density change of pure aluminium, solid-liquid interface moves more slowly but the solidified mass fraction is larger. The cooling rate of the wall is shown to have a significant influence on the phase change heat transfer and thermal stresses, while the density change has a small influence on the motion of the interface, solidified mass fraction, temperature distributions and thermal stresses. As the cooling rate increases, the thermal stresses become higher at the early stage of a solidification process, but it has small influence on the final stresses as the steady state is reached.

• 대기
• /
• 제23권4호
• /
• pp.367-375
• /
• 2013

We present here the future changes in vertical distribution of temperature and tropopause height using the HadGEM2-AO climate model forced with Representative Concentration Pathways (RCPs) scenarios. Projected changes during the 21st century are shown as differences from the baseline period (1971~2000) for global vertical distribution of temperature and tropopause height. All RCP scenarios show warming throughout the troposphere and cooling in the stratosphere with amplified warming over the lower troposphere in the Northern Hemisphere high latitudes. Upper troposphere warming reaches a maximum in the tropics at the 300 hPa level associated with lapse-rate feedback. Also, the cooling in the stratosphere and the warming in the troposphere raises the height of the tropopause.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.318-318
• /
• 2010

In this paper, we studied generating characteristic of cymbal type piezoelectric transducer according to change of cymbal cap. The transducer is composed of circular piezoelectric ceramic and two elastic bodies which are shaped as cymbal. Two elastic bodies are attached to upper and bottom of the ceramic. Principle of the transducer is to generate expanded displacement because vertical stress is transformed into horizontal stress by slope angle of elastic bodies. The transducer also has advantage of high durability by the angle of elastic bodies. In this study, each parameter was chosen, and then generating characteristics were analyzed by FEM program. The parameters were slope angle of cymbal cap (theta), cap height (h) and cap inner diameter(d). The model that had generating characteristic Of high voltage was chosen by results of the analysis. Besides, maximum vertical displacements according to change of vertical stress were analyzed by structural analysis in order to find out relation between the maximum vertical stress which can prevent from ceramic damage and conditions of each cap.

• 대한물리의학회지
• /
• 제4권2호
• /
• pp.117-124
• /
• 2009

Purpose：The purpose of this study was to investigate of the change of the forward head posture(FHP) according to computer using time. Methods：Subjects were 30 male and 30 female. The factors of FHP were measured cranial vertical angle, cranial rotation angle, and head, upper back, neck flexion/extension angle according to computer using time. Change of FHP used to Digital Inclinometry(JTech, Dualer IQTM Dual Inclinometer). The data were collected by data logger(Logger Teknologi HB, Akarp, Sweden). Results：Cranial vertical angle, cranial rotation angle, and head, upper back, neck flexion/extension were increased according to computer using time(p<.05). But cranial vertical angle and cranial rotation angle, and head, upper back, neck flexion/extension were not significant differences between male and female group(p>.05). Conclusion：The effects of cranial vertical angle, cranial rotation angl and head, neck and upper back angle depend on the computer task time. Increased of FHP may result increased tension in posture muscles of cervical spine, resulting in a risk of musculoskeletal disorders.

• 대한구순구개열학회지
• /
• 제2권1_2호
• /
• pp.15-22
• /
• 1999

It is well known that the postoperative skeletal instability after Le Fort I osteotomy for advancement of maxilla in the cleft patients is one of the major surgical problems. So we had tried to compare the amount of relapse after Le Fort I advancement surgery in the horizontal and vertical positional change, angular change of reference points between cleft patients and non-cleft patients. Longitudinal records of 10 consecutive cleft patients (test group) and 20 non-cleft patients (control group) were analyzed. Lateral cephalograms were taken preoperatively, immediately postoperatively, and 2, 6, 12 months postoperatively. We measured horizontal and vertical changes (ANS, PNS, AI) and angular change (SNA) of the reference points and lines. In the test group, horizontal relapse of ANS, PNS, AI point are 36.4%, 37.5%, 32.0% respectively at 12 months postoperatively. The vertical relapse of ANS, PNS, AI are 25.3%, 32.3%, 39.1% respectively at 12 months postoperatively. The angular change of SNA is 33.6% at 12 months postoperatively. In the control group, horizontal relapse of ANS, PNS, AI point are 23.8%, 30.2%, 21.7% respectively at 12 months postoperatively. The vertical relapse of ANS, PNS, AI are 22.7%, 27.3%, 25.1% respectively at 12 months postoperatively. The angular change of SNA is 22.2% at 12 months postoperatively. The cleft patients have a larger tendency of skeletal and dental relapse compared with non-cleft patients after Le Fort I surgery. So the oral and maxillofacial surgeons must keep in mind these facts in order to minimize the relapse phenomenon from the beginning of surgical planning to postoperative care.

• Ocean and Polar Research
• /
• 제33권spc3호
• /
• pp.397-407
• /
• 2011

To understand the vertical structure of ocean currents from raw data observed by lowered-ADCP (LADCP), these data require post-processing. Data were processed using Krahman's version 10.8 processing software based on Matlab. It is estimated the influence of auxiliary data affecting the processed current structure. The bottom-tracked velocities and the GPS information significantly contribute the offset on reference velocities in the bottom layer and barotropic ones in the middle layer, respectively. Good quality data can be obtained when LADCP is least tilted in pitch and roll during observation. In situ application of LADCP to the (northward) volume transports of Kuroshio in the East China Sea proved to be 24.8. Sv (= $1{\times}10^6m^3s^{-1}$) in October 2007, and 28.2 Sv in June 2008, respectively. The volume transport is relatively large over the continental slope when compared to the shelf or the deep sea.

• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.11-17
• /
• 2012

In this study, an experiment with large-scale model was performed according to raising embankment in order to investigate the cause of collapse by a change in water level of reservoir. Also, the settlement and pore water pressure by high water level and a rapid drawdown were compared and analyzed. After raising embankment for inclined core, there was no infiltration by leakage. For the vertical core, the pore water pressure showed a largely change by faster infiltration of pore water than in the inclined core. In a rapid drawdown, inclined core was remained stable but vertical core showed a largely change in pore water pressure. A settlement after a raising embankment showed a larger measure of settlement than before the raising embankment. The leakage quantity before a raising embankment and an inclined extension showed no leakage. Leakage in vertical extension was measured 160 $l$. From the result, a instrument system that can accurately estimate a change of pore water pressure shall be established for a rational maintenance and stabilization of raising embankment for agricultural reservoir.