• 천문학회지
• /
• 제43권3호
• /
• pp.55-64
• /
• 2010

We investigate how plasma structures in the solar chromosphere and corona can extend to altitudes much above hydrostatic scale heights from the solar surface even under the force of gravity. Using a simple modified form of equation of motion in the vertical direction, we argue that there are two extreme ways of non-hydrostatic support: dynamical support and magnetic support. If the vertical acceleration is downward and its magnitude is a significant fraction of gravitational acceleration, non-hydrostatic support is dynamical in nature. Otherwise non-hydrostatic support is static, and magnetic support by horizontal magnetic fields is the only other possibility. We describe what kind of observations are needed in the clarification of the nature of non-hydrostatic support. Observations available so far seem to indicate that spicules in the quiet regions and dynamic fibrils in active regions are dynamically supported whereas the general chromosphere as well as prorninences is magnetically supported. Moreover, it appears that magnetic support is required for plasma in some coronal loops as well. We suspect that the identification of a coronal loop with a simple magnetic flux tube might be wrong in this regard.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.675-682
• /
• 2010

The flood impact pressure acting on a vertical wall resulting from a dam-breaking problem is simulated using a navier-Stokes(N-S) solver. The N-S solver uses Eulerian Finite Volume Method(FVM) along with Volume Of Fluid(VOF) method for 2-D incompressible free surface flows. A Split Lagrangian Advection(SLA) scheme for VOF method is implemented in this paper. The SLA scheme is developed based on an algorithm of Piecewise Linear Interface Calculation(PLIC). The coupling between the continuity and momentum equations is affected by using a well-known Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) algorithm. Several two-dimensional numerical simulations of the dam-breaking problem are presented to validate the accuracy and demonstrate the capability of the present algorithm. The significance of the time step and grid resolution are also discussed. The computational results are compared with experimental data and with computations by other numerical methods. The results showed a favorable agreement of water impact pressure as well as the global fluid motion.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.418-435
• /
• 2001

Root canal preparation process is of utmost importance in successful treatment of root canal. Also, one of the most important purpose of the root canal preparation is to enlarge the root canal three dimensionally without changing the curvature of the root canal However as the curvature of the root canal increases, there are many difficulties involved in formation of optimum root canal. Therefore in order to solve the above mentioned problems, new developments in methods of root canal preparation and equipments for such purposes were made. Recently, vigorous studies about newly introduced engine-driven nickel-ti-tanium rotary file are conducted. As shown in research results to dates, it is well established that the use of nickel-titanium file is better suited for curved root canal than stainless steel file in maintaining the curvature or root canal and reducing the deformation of root canal. However it is also acknowledged that there are a few discrepancies in research results according to protocol, due to failure to remove variables in experiments. In addition, although it is recommended by the manufacturer that the GT rotary file should maintain a low rotational speed of 150~350rpm and 'light pressure' as light as not to break the lead of a pencil, academic studies about the vertical force which is not yet standardized are not sufficiently explored. Therefore, this research devised and utilized a special research equipment to standardize the appropriate range of vertical force for GT rotary file through experiments by breaking of the lead of a pencil as expressed by the manufacturer and to accurately measure factors involved through repeating and recreating the environment of root canal preparation. Forming nine experimental groups by varying the vertical forces (150g. 220g, 300g) and rpm (150rpm, 250rpm, 350rpm), the effects of changing vertical forces and rpm on working efficiency were measured in terms of time expended in root canal preparation by crown-down method using a transparent resin block with 35 degree curvature and GT rotary file (z-test). The following research using this special research equipment that involved nine experimental groups and varying the vertical force for root canal preparation from 300g which is within the normal vertical force range to 700g and 1000g which fall outside the normal rpm range. The results were as follows : 1. Analysis of the experiment results revealed that the time spent in root canal preparation decreased as the vertical forces and rpm increased (p<0.05). Also, the effects of rpm were greater than those of the vertical forces within the normal vertical force range ($\beta$-weight test). 2. Observation of the deformation of GT rotary file revealed that deformation increases in a direct correlation with the vertical force increase and in a reverse correlation with the rpm decrease. In the case of the vertical forces close to the normal range, the probability of GT rotary file deformation were quite different depending on the rpm changes. In the case of greater vertical forces, the occurrences of deformation of the file were more frequent regardless of the rpm changes. 3. Deformation and breakage of file were also commonly observed in the expended time measurement experiments and GT rotary file deformation experiments in which low speed rpm (150rpm) was used and at the curved portion of the resin block.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.172-178
• /
• 2012

현행 철도건설기준에서 종곡선과 완화곡선의 경합은 궤도형식에 관계없이 허용하고 있지 않다. 그러나 이러한 기준은 주로 자갈도상궤도의 유지보수의 어려움 때문에 정립된 것이다. 콘크리트궤도는 자갈도상궤도에 비해 유지보수 및 구조안전성 측면에서 장점을 가지고 있다. 따라서 콘크리트 궤도의 경우, 열차의 주행안전성 및 승차감 기준을 만족하는 범위내에서 어느 정도의 선로경합은 완화할 필요성이 있다. 본 연구에서는 종곡선과 완화곡선의 경합여부에 따라 도상종별 열차의 주행안전성 및 승차감, 그리고 궤도작용력을 비교 분석하였으며, 그 결과 경합된 경우도 주행안전, 승차감 및 궤도작용력 기준을 만족하는 것으로 나타났다. 따라서, 비록 자갈도상궤도에서의 선로경합은 많은 유지보수를 필요로 하기 때문에 적용될 수는 없다 할지라도, 콘크리트궤도에서는 유지보수 및 구조적 장점을 고려할 때 종곡선과 완화곡선의 경합이 적용될 수 있을 것으로 판단된다.

• 한국통신학회논문지
• /
• 제32권2B호
• /
• pp.124-132
• /
• 2007

이기종망간의 핸드오프 시, TCP는 새로운 망 환경에서 최적의 전송 CWND 값을 갖기까지 비효율적인 전송을 하게 된다. 본 논문에서는 이러한 전송상태에서의 SACK TCP와 BIC TCP의 성능과 이에 영향을 미치는 요소들을 분석하였다. 수치적 분석과 시뮬레이션 분석을 통하여, BIC TCP가 SACK TCP보다 훨씬 좋은 성능을 보여주었으며, RTT와 전송대역의 변화에 대해서도 좋은 성능을 보여 주었음을 알 수 있었다.

• 대한화학회지
• /
• 제46권5호
• /
• pp.467-476
• /
• 2002

• 한국공간구조학회논문집
• /
• 제11권1호
• /
• pp.57-66
• /
• 2011

중진 지역에 있는 RC 골조의 횡하중에 대한 설계에서 저층부에 있는 보와 기둥의 강도는 상층부의 강도보다 커야만 한다. 그러나 횡하중에 대한 보의 설계 모멘트를 골조의 수평방향뿐만 아니라 수직방향으로 재분배 시킬 수 있고 그 결과 모든 보의 강도를 같게 할 수 있다. 본 논문은 최대한 많은 층의 보 휨 강도를 동일하게 만들기 위한 수직방향 보 모멘트 재분배의 영향을 살펴보는데 있다. 2경간-6층 RC 골조를 수직방향 모멘트 재분배를 고려한 경우와 고려치 않은 경우로 각각 설계하고 이들의 내진성능을 정적 비선형 한계하중 해석법과 동적 비선형 시간이력 해석법을 이용하여 구하였다. 해석결과 수직방향으로 보의 모멘트를 재분배하면 재분배 한 크기만큼 증가된 연성도를 요구하지만, 이 추가적인 요구는 상세설계가 잘된 RC 부재의 연성도 능력보다 작다.

• 대기
• /
• 제23권3호
• /
• pp.321-329
• /
• 2013

This study examines the effect of aerosols on the vertical invigoration of continental stratiform clouds, using a dataset of Atmospheric Radiation Measurement (ARM) Intensive Operational Period (IOP, March 2000) at the Southern Great Plains (SGP) site. To provide further support to our observation-based findings, the weather research and forecasting (WRF) sensitivity simulations with changing cloud condensation nuclei (CCN) concentrations have been carried out for the golden episode over SGP. First, cross correlation between observed aerosol scattering coefficient and cloud liquid water path (LWP) with a 160-minutes lag is the highest of r = 0.83 for the selected episode, which may be attributable to cloud vertical invigoration induced by an increase in aerosol loading. Modeled cloud fractions in a control run are well matched with the observation in the perspective of cloud morphology and lasting period. It is also found through a simple sensitivity with a change in CCN that aerosol invigoration (AIV) effect on stratiform cloud organization is attributable to a change in the cloud microphysics as well as dynamics such as the corresponding modification of cloud number concentrations, drop size, and latent heating rate, etc. This study suggests a possible cloud vertical invigoration even in the continental stratiform clouds due to aerosol enhancement in spite of a limited analysis based on a few observed continental cloud cases.

• 패션비즈니스
• /
• 제20권2호
• /
• pp.46-58
• /
• 2016

Architecture and Fashion mutually affects the shape and appearance of the other as an art of space according to the hybrid trends. Therefore, the purpose of this study is to find the correlations between the characteristics of traditional architecture types in Southeast Asia and modern fashion. Firstly, characteristics of the types obtained through the theoretical consideration of Southeast Asian architectural tradition include vertical, symmetrical, geometrical, epeated and continual structure. On the basis of these characteristics analyzed from 2013's S/S to 2015's F/W collection of Alexander McQueen, Gareth Pugh, Victor & Rolf, designers with strong creative and experimental minds who juxtaposed designs of two opposing points as well as hybrids since 2000, the following formativeness exists. First, the vertical structure of high floor is represented as a straight silhouette, a color contrast, vertical cut or wrinkle. Hence, it impresses verticality, rhythm, etc. Second, symmetrical structure of the gable roof is represented as a trapezoidal shape starting from the shoulder line or neck line widened into sleeves, impressing symmetry, dynamism, etc. Third, the geometry of the assembled is represented as vertical and horizontal bands or pattern pieces like puzzle, impressing geometry, three-dimensional, etc. Fourth, repeated structure of the weaving pattern is represented as repetitive patterns of woven fabric or printing techniques. Thus, it impresses repeatability, harmony, etc. And lastly, continuous group structure is represented as a connection of collars or hem-lines, as well as a crossing of fabric that impresses continuity, liquidity, etc.

• 한국건설관리학회논문집
• /
• 제7권4호
• /
• pp.78-90
• /
• 2006

대부분의 건축 토목공사의 기초공사 시 사용하는 기성콘크리트 파일공사의 굴착 및 파일 매입 작업의 경우 국내 시방기준에는 파일을 연직으로 시공해야한다는 것만이 명시되어 있을 뿐, 이에 대한 측정기준 및 시공기준이 제시되어있지 않으며, 대부분의 시공현장에서는 숙련노무자의 경험을 통한 육안측정에 의존하고 있는 실정이다. 본 연구의 목적은 기수행된 PHC 파일 시공성능 향상을 위한 연직 자동제어기 파일롯타입(pilot-type) 연구를 바탕으로 PHC파일 시공 시 균일한 시공품질을 확보하고 작업의 안전성 확보 및 생산성 향상을 위한 파일 연직 자동제어기 프로토타입(prototype)을 개발하는 것이다. 본 연구를 통해 제시된 PHC 파일 연직 자동제어기가 현장에 적용될 경우, PHC 파일 연직도 측정 및 제어의 자동화를 통해 품질 및 안전성 향상이 가능할 것으로 기대된다.