• 해양환경안전학회지
• /
• 제18권5호
• /
• pp.475-480
• /
• 2012

해안 및 항만에 설치되는 항로표지 시설에 3색 LED를 적용하여 야간에 식별을 용이하게 하는 감성적 시각의 조명과 항만 진입등의 점멸제어 방식에 대하여 연구하였다. 항만 양측에 홍등, 백등의 항로표지를 주변의 조명과 차별화하여 식별을 쉽게 하였고, GPS에 의한 시각동기와 타이머를 통하여 항만 진입등을 좌우 및 일렬순차 점등으로 동기시키는 통합형 콘트롤러를 설계하였다. LED에 의한 AtoN(Aids to Navigation) 시설을 높이에 따른 층별 색상으로 조화시키고 감성조명으로 표현하여 항해사의 표지식별에 대한 혼란을 방지하며 야간항만의 경관을 미화시키는 효과를 얻었다. 또한 선박의 항만진입을 인도하는 메시지를 전달하는 모르스 부호 발광의 기능을 부가적으로 구현하였다. 등명기는 반영구적인 고휘도 LED로 대체되므로써 수명과 소비전력에 대한 효율성을 증대하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.495-498
• /
• 2006

Optical profile and spectral absorption of suspended solids in waters of Sanya bay was measured on August 8-14, 2003. Optical profile was taken by using MicroPro optical profile. Apparent optical indexes, vertical diffuse attenuation coefficient ($K_d$) and water leaving radiance (Lw), were calculated. $K_d$ at the blue end of the spectrum was greater than that at the red end of the spectrum in waters near Sanya River mouth, however, in waters near open sea, $K_d$ at the blue end of the spectrum was smaller than that at the red end of the spectrum. Distribution of water leaving radiance was relatively higher in waters near Sanya River mouth, but relatively weaker in near open sea water. Spectral absorption of suspended particulates was also measured. Results showed that the spectral absorption of chlorophyll a was greater in waters near Sanya river mouth, but relatively weaker in waters near open sea, which indicated higher concentration of phytoplankton in waters near Sanya river mouth. Except for water at the 5th sampling station, the ratio of spectral absorption of chlorophyll a to total suspended particulates in surface waters was greater than that in bottom waters at all stations.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.297-301
• /
• 2002

High-speed machining generates concenter thermal/frictional damage at the cutting ed rapidly decreases the tool life. This paper I at determining the effect of cutter orienter the cutting environment on tool life, tool mechanism when down milling. In this paper, experiments were carried out in various tool and cutting environments, such as dry, wet compressed chilled air, tool life were measu evaluate machinability in high-speed milli difficult-to-cut material and die steel, Tool measured in horizontal upwards, horiz downwards, vertical upwards and vert downwards. In addition, tool life was measur dry, wet and compressed chilled air. For this a compressed chi1led-air system was manufact The results show that a horizontal cutter ori provided a longer tool life than a vertical orientation. With respect to the cutting envi compressed chilled air increased tool life. H the wet condition decreased tool life due thermal shock caused by excessive cooling high-speed mill ins and the compressed chilled had little effect.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.221-221
• /
• 2013

Vertical LED (VLED) has been recognized as a way to obtain the high-power LED due to their advantages [1]. However, approximately 4% of the light generated from the active region is extracted, if the light extraction from side walls and back side is neglected because of Fresnel reflection (FR) and total internal reflection (TIR) [2,3]. In this study, the optical simulation of the VLED with the various microstructures was performed. Among them, the microlens having the diameter of 3 ${\mu}m$ and the height of 1.5 ${\mu}m$ shown the best result was chosen, and then, optimized microlens was formed on a GaN template using conventional semiconductor process. Various microstructures were proposed to improve the light extraction efficiency (LEE) of the VLED for the simulation. The LEE was simulated using LightTools based on a Monte Carlo ray tracing. The microstructures with hemisphere, cone, truncated and cylinder pattern having diameter of 3 ${\mu}m$ were employed on the top layer of the VLED respectively. The improvement of the LEE by using the microstructure is 87% for the hemisphere, 77% for the cone, 53% for the truncated, 21% for the cylinder, compared with the LEE of the flat surface at the reflectance of 85%. The LEE was increased by 88% at the height of 1.5 ${\mu}m$, compared with the LEE of the flat surface. We found that the microlens on the top layer is the most suitable for increasing the LEE. In order to apply the proposed microlens on n-GaN surface, we fabricated microlens on a GaN template. A photoresist array having hexagonal-closed packed microlens was fabricated on the GaN template. Then, optimization of etching the GaN template was performed using a dry etching process with ICP-RIE. The dry etching carried out using a gas mixture of Cl2 and Ar, each having a flow rate of 16 sccm and 10 sccm, respectively with RF power of 50 W, ICP power of 900 W and chamber pressure of 2 mTorr was the optimum etching condition as shown in Fig. 2(a).

• 산업기술연구
• /
• 제3권
• /
• pp.103-116
• /
• 1983

Recent developments in multi-storey buildings for residential purpose have led to the extensive use of shear walls for the basic structural system. When the coupled shear wall system is used, joined together with cast-in-place concrete or mortar (or grout), the function of the continuous joints is a crucial factor in determining the safety of L.P. Precast concrete shear wall structures, because the function of the continuous joints(Vertical wall to wall joints) is to transfer froces from one element(shear wall panel) to another, and if sufficient strength and ductility is not developed in the continuous joints, the available strength in the adjoining elements may not be fully utilized. In this paper, the influence of the stiffness of vertical joints(wet vertical keyed shear joints) on the behaviour of precast shear walls is theoretically investigated. To define how the stiffness of the vertical joints affect the load carrying capacity of L.P.Precast concrete shear wall structure, the L.P.Precast concrete shear wall structure is analyzed, with the stiffness of the vertical joints varying from $K=0.07kg/mm^3$(50MN/m/m) to $K=1.43kg/mm^3$(1000MN/m/m), by using the continuous connection method. The results of the analysis shows that at the low values of the vertical stiffness, i.e. from $K=0.07kg/mm^3$(50MN/m/m) to $K=0.57kg/mm^3$(400MN/m/m), the resisting bending moment and shearing force of precast shear walls, the resisting shearing force of vertical joints and connecting beams are significantly affected. The detailed results of analysis are represented in the following figures and Tables.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.22-30
• /
• 2015

Currently, in South Korea, 'Light Pollution Prevention Act by Artificial Lighting' has been enforced. For advertising lighting, it is limited based on only the light-emitting luminance. Luminance is a concept related to the glare. Not only the luminance of the light source, but also glare is affected depending on some situations like blinking, luminance contrast, background illuminance. This study conducted glare subjective evaluation with brightness, color, and blinking by looking at the LED lighting box. The results showed that the glare indexes were higher about 2 times in a decrease of background illuminance from 100lx to 0lx. The glare index of R, G, B light was higher than that of white light. The average glare index of the blue light was higher about 8 times compared to 2,700K. And the blink rate had little effect on the glare, but it affected the irritation. Therefore, the glare effect of light color and blinking needs to be considered for the standard of luminous environment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.432-432
• /
• 2007

We studied optical simulation method for ultra slim backlight system. We designed 0.7mm thickness light guide plate and combined 48 white color LEDs for 12 inch wide size TFT-LCD. We designed flat shape PMMA light guide plate with both side patterned. It have vertical prism shape on upper side and ellipse dot pattern on the other side. We targeted 4500 nit brightness and uniform emission characteristic without hot spot or dark area. At first, we designed uniform emission area with more high brightness in center area and then, debugged light entering hot spot zone and direction of outgoing light flux. Although it was designing step, we obtained good result with reverse prism optical sheet and it had good repeatability because it was based on the stamper method in injection process without laser engraving or micro groove engraving method.

• 한국실내디자인학회논문집
• /
• 제26권5호
• /
• pp.143-151
• /
• 2017

This study aims to analyze the design of public libraries which act as anchors in culture-led urban regeneration. They have been built as city's symbols as well as catalysts to revitalize city centers and urban spaces since the 1990s. This study finds that the public libraries play roles in the urban development as cultural icons, multi-functional spaces, and public domain. This study examines the five examples of the libraries and finds their important design qualities as follow. First, public libraries are planned to symbolize local culture and history as cultural icons. The shapes of public libraries are expressed with sculptured cultural icons, while their facades are designed to signify cities' identities and images. Second, public libraries in culture-led urban regeneration have multi-functional spaces which provide diverse activities and experiences to visitors. The libraries often have galleries and theaters for cultural life, cafes and shops for daily uses, educational facilities, as well as public services, parking, and transport systems that connect to urban infrastructure. Third, the public libraries become the anchors of surrounding public spaces and cultural buildings. The libraries have the sequences of approach from entry plazas, transitional zones, and entrances to lobbies. Especially the transitional zones between the libraries and the cities that are covered with giant cantilevers expand the libraries' space and establish attractive urban spaces. Forth, the libraries employ nature and cityscapes in their design. The surfaces and openings of the libraries are adjusted to allow many attractive views to visitors. Fifth, the libraries have big lobby spaces which are the centers of the buildings as well as the public domain. The lobby spaces are designed as in-door spaces like out-doors with vertical and horizontal openness that allow the natural flows of light from ceilings, glass walls and vertical voids.

• 한국광학회지
• /
• 제14권2호
• /
• pp.122-129
• /
• 2003

AIGaInP/GaP 계열 고휘도 LED의 광추출효율을 높이기 위하여 평행직육면체 다이스 측면을 식각할 경우에, 식각 깊이와 각도가 광추출효율에 미치는 영향을 재료의 흡수계수와 전극의 반사 및 흡수율에 따라 해석하고 공정의 용이성을 고려한 광추출효율의 개선이 기대되는 측면 식각깊이와 식각각도를 고찰하였다. 그 결과 결함 등에 의한 재료의 흡수계수가 0~1 $cm^{-1}$ / 이 되도록 발광다이오드 재료의 결정을 성장시켰을 경우, 전극을 고려하지 않은 LED의 기하구조의 변화를 통한 광추출효율개선 효과를 얻기 위해서 측면의 식각각도는 22$^{\circ}$~45$^{\circ}$로 하고 식각깊이는 다이스 높이의 8%~17%로 할 때 전극을 고려하지 않은 TIP 구조 LED의 80%에 해당하는 광추출효율을 얻을 수 있고, 식각깊이를 다이스 높이의 16%~39%로 하면 전극을 고려하지 않은 TIP 구조 LED의 90%에 해당하는 광추출효율을 얻을 수 있다. 전극의 영향을 고려할 경우 LED의 기하구조의 변화를 통한 광추출효율 개선 효과를 얻기 위해서 측면의 식각각도는 25$^{\circ}$~45$^{\circ}$로 하고 식각깊이는 다이스 높이의 30%~36% 로 할 때 전극을 고려한 TIP 구조 LED의 90%에 해당하는 광추출효율을 얻을 수 있고, 식각깊이를 다이스 높이의 57%~71%로 하면 전극을 고려한 TIP구조 LED의 90%에 해당하는 광추출효율을 얻을 수 있음을 밝혔다.

• 대한토목학회논문집
• /
• 제2권4호
• /
• pp.39-47
• /
• 1982

본(本) 연구(硏究)에서는 연약점토지반(軟弱粘土地盤) 위에 성토시(盛土時) 보강재(補强材)와 vertical drain재(材)로서의 geotextile의 효과(効果)를 모형실험(模型實驗)을 통(通하)여 조사하였다. 실험은 점토층(粘土層)과 성토층(盛土層) 사이에 woven fabric을 포설(鋪設)하지 않은 경우, fabric을 포설(鋪設)한 경우, fabric에 서로 다른 인위적(人爲的) 인장력(引張力)을 가(加)한 2가지 경우 등 4단계(段階)로 수행(遂行)하였으며 각(各) 단계(段階)마다 압밀(壓密)을 촉진(促進)시키기 위해 non-woven fabric을 사용(使用)한 vertical drain을 점토층(粘土層) 내(內)에 정방형(正方形)으로 배치(配置)하였다. 실험(實驗)모델은 밑면이 $32cm{\times}330cm$이며, 50cm점토층(粘土層) 위에 47cm 높이의 성토제방(盛土堤防)이 1:1.5의 기울기로 만들어졌다. 모형실험대(模型實驗臺)의 양쪽 면에 대칭적(對稱的)으로 8개의 piezometer를 설치(設置)하여 시간(時間)에 따른 공극수압(空隙水壓)을 측정(測定)하였으며 성토제방(盛土堤防) 내부(內部)에 LED램프를 삽입(揷入)하여 시간(時間)에 따른 내부(內部) 변형(變形)을 조사하였고, 제방(堤防)이 설치(設置)되지 않은 점토지반(粘土地盤) 양쪽에는 dialgauge를 부착(附着)하여 융기현상(隆起現象)을 조사하였다. 이러한 실험(實驗)은 1차압밀(次壓密)에 요구(要求)되는 시간(時間)(약(約) 10일(日))동안 수행(遂行)되었다. 실험(實驗)으로부터 점토층(粘土層) 내(內)에 유발(誘發)된 최대과잉공극수압(最大過剩空隙水壓)을 측정(測定)하여 woven fabric을 포설(鋪設)하지 않은 경우의 이론적(理論的)인 최대과잉공극수압(最大過剩空隙水壓)과 비교(比較)함으로써 보강재(補强材)로서의 woven fabric을 포설(鋪設)하였을 경우에도 시간(時間)에 따른 성토부(盛土部) 침하량(沈下量)을 산정(算定)할 수 있음이 밝혀졌다.