• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1554-1563
• /
• 1999

This paper presents the design of high speed processor for a sequence logic control using field programmable gate array(FPGA). The sequence logic controller is widely used for automating a variety of industrial plants. The FPGA designed by VHDL consists of program and data memory interface block, input and output block, instruction fetch and decoder block, register and ALU block, program counter block, debug control block respectively. Dedicated clock inputs in the FPGA were used for high speed execution, and also the program memory was separated from the data memory for high speed execution of the sequence instructions at 40 MHz clock. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 16 bits or 32 bits respectively. And the real time debug operation was implemented for easy debugging the designed processor. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to sequence control system with inputs and outputs of 256 points. The designed processor for the sequence logic was compared with the control system using the DSP(TM320C32-40MHz) and conventional PLC system. The designed processor for the sequence logic showed good performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.786-792
• /
• 2016

Camellia was jointly developed by Nippon Telegraph and Telephone Corporation and Mitsubishi Electric Corporation in 2000. Camellia specifies the 128-bit message block size and 128-, 192-, and 256-bit key sizes. In this paper, a modified round operation block which unifies a register setting for key schedule and a conventional round operation block is proposed. 16 ROMs needed for key generation and round operation are implemented using only 4 dual-port ROMs. Due to the use of a message buffer, encryption/decryption can be executed without a waiting time immediately after KA and KB are calculated. The suggested block cipher Camellia algorithm is designed using Verilog-HDL, implemented on Virtex4 device and operates at 184.898MHz. The designed cryptographic core has a maximum throughput of 1.183Gbps in 128-bit key mode and that of 876.5Mbps in 192 and 256-bit key modes. The cryptographic core of this paper is applicable to security module of the areas such as smart card, internet banking, e-commerce and satellite broadcasting.