• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.80-89
• /
• 1998

Propulsion subsystem transfers KOMPSAT into mission orbit and controls its attitude. Design factor consists of structure safety, electrical circuit design, consumable power estimation of thermal hardwares, damping device design of fuel transient pressure, and system configuration design by considering plume effect from thruster firing. System level analysis should be performed for verification of system design under launch vehicle and orbital environment. Electrical functional test of thermal control hardware, proof pressure test, cleanliness verification test, and internal/external leakage test of fuel feeding system should be carried out for performance estimation of propulsion system. Design and assembly process of propulsion subsystem was depicted and reliability of system was verified by test analysis in this paper.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.1-10
• /
• 2011

This is a comparative study of three inertia navigation units and focuses on the verification of reliability about GPS/INS for the SmartUAV(DGNS). Those GPS/INS have been tested using a manned aircraft and an automobile. The comparative aspect of units include details about the GPS positions and the inertia sensor performance. With the flight scenario, the DGNS guarantees the reliability of the navigation operation and performs the flight test for the development of the SmartUAV.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.2
• /
• pp.160-168
• /
• 2019

In this study, we propose a verification method for a planar-phased array radar system using a near-field beam focusing(NFBF) test method. We then confirmed the validity of the results. The proposed method can be used to verify a radar system in the near-field range of twice the antenna aperture size, and this is done in the same manner as the field system performance test conducted in a non-outdoor electromagnetic anechoic chamber. The test configuration and procedure for verifying the NFBF using near-field energies were reviewed. In addition, the phase compensation values of additional individual channels were quantified through mathematical verification of the beam-steered NFBF test. Based on a theoretical verification, the actual NFBF test was performed and the validity of the test method was confirmed through comparison with ideal analytical results.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.6
• /
• pp.33-43
• /
• 2010

This paper deals with the hybrid structural test technique which has been introduced and studied currently in Korea. In this study, a Mini-MOST system which was developed as a part of NEES research was modified and improved to reduce the total simulation time to half of the original system. Using the proposed system together with the 2 dimensional small steel frame specimen, the validity and efficiency of the hybrid test technique is investigated. Even though the hybrid test has been developed as an alternative to the shaking table test and has been studied and applied for a long time in several countries, no attempt has been made to compare it directly with the shaking table test. Therefore, in this study, the hybrid test results are compared with those of the shaking table test as well as with a numerical simulation for the verification of hybrid test. From the comparison and analysis of the test results, it is concluded that the hybrid test can simulate the actual seismic behavior of structural systems very accurately and it can be a good alternative to the shaking table test.

• Journal of Korean Public Health Nursing
• /
• v.28 no.1
• /
• pp.57-70
• /
• 2014

Purpose: This study is a methodological research study for development of a tool for measurement of care satisfaction of home health nursing in patients who have received care through home health nursing and to test the validity and reliability of the tool. Method: Based on Watson's theory of caring and its constituent factors, the literature related to home health nursing was reviewed, and the standard of home health nursing was compared and analyzed. For verification of the validation and reliability of the final tool which has been developed, data were collected from 166 people who were receiving home health nursing care. Result: According to results of analysis of the factors based on Kaiser and scree test, 10 factors with an eigenvalue greater than 1.0 were extracted, and they explained 72.26% of the total variance. In addition, the factor loadings of 56 questions were greater than .30. For verification of reliability, Cronbach's alpha for all 56 items was .98 and Guttman split half reliability coefficient was .90. Conclusion: This tool based on Watson's theory of caring contributed to development and application of the nursing theory through verification of the theory.

• Journal of Korea Water Resources Association
• /
• v.37 no.2
• /
• pp.155-161
• /
• 2004

The purpose of this study is to verify LSPIV technique. Verification was made using moving cart with known velocity. The difference of velocity values obtained using these methods are within 5％, which means that LSPIV can be used in the field with reasonable accuracy After verification, LSPIV was applied to the river. The Neungwon stream and the Gonjiam stream, tributaries of the Kyungan stream, were selected as the test sites for application. The results of the test application were compared with those obtained by 3-D electromagnetic current meter and electron-wave surface velocity meter. Results show that the velocity values obtained using LSPIV coincide well with those obtained using conventional devices with maximum difference of 8％.

• Journal of Korean Society on Water Environment
• /
• v.31 no.5
• /
• pp.507-522
• /
• 2015

In this study, some of the model verification results of STREAM (Spatio-Temporal River-basin Ecohydrology Analysis Model), a newly-developed hybrid watershed model, are presented for the runoff processes of nonpoint source pollution. For verification study of STREAM, the model was applied to a test watershed and a sensitivity analysis was also carried out for selected parameters. STREAM was applied to the Mankyung River Watershed to review the applicability of the model in the course of model calibration and validation against the stream flow discharge, suspended sediment discharge and some water quality items (TOC, TN, TP) measured at the watershed outlet. The model setup, simulation and data I/O modules worked as designed and both of the calibration and validation results showed good agreement between the simulated and the measured data sets: NSE over 0.7 and $R^2$ greater than 0.8. The simulation results also include the spatial distribution of runoff processes and watershed mass balance at the watershed scale. Additionally, the irrigation process of the model was examined in detail at reservoirs and paddy fields.

• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.968-976
• /
• 2019

This paper presents a number of verification case studies for a recently developed sensitivity/uncertainty code package. The code package, ROMUSE (Reduced Order Modeling based Uncertainty/Sensitivity Estimator) is an effort to provide an analysis tool to be used in conjunction with reactor core simulators, in particular the Virtual Environment for Reactor Applications (VERA) core simulator. ROMUSE has been written in C++ and is currently capable of performing various types of parameter perturbations and associated sensitivity analysis, uncertainty quantification, surrogate model construction and subspace analysis. The current version 2.0 has the capability to interface with the Design Analysis Kit for Optimization and Terascale Applications (DAKOTA) code, which gives ROMUSE access to the various algorithms implemented within DAKOTA, most importantly model calibration. The verification study is performed via two basic problems and two reactor physics models. The first problem is used to verify the ROMUSE single physics gradient-based range finding algorithm capability using an abstract quadratic model. The second problem is the Brusselator problem, which is a coupled problem representative of multi-physics problems. This problem is used to test the capability of constructing surrogates via ROMUSE-DAKOTA. Finally, light water reactor pin cell and sodium-cooled fast reactor fuel assembly problems are simulated via SCALE 6.1 to test ROMUSE capability for uncertainty quantification and sensitivity analysis purposes.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.69-77
• /
• 2023

Recently, carbon composites have been applied to various fields. However, carbon composites have not been applied to the fishing vessel field due to its structure standards centered on glass composites. In this study, a structural strength evaluation study was conducted for the application of carbon composites in the fishing vessel field. Hull minimum thickness verification test and hull joint verification test were conducted. Compared to glass composites, the verification was based on equivalent or better performance. The results show that carbon composites can reduce the weight by 20% compared to glass composites. For hull joints, it was necessary to increase the thickness of the joint seam by the thickness of the hull to apply carbon composite. Through this study, a standard for the application of carbon composites to fishing vessel can be established.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.376-384
• /
• 1999

In this paper, we introduce the on-line test plan of high speed rail development, which will be carried out at the test section of Seoul-Pusan high speed line from May to October, 2002. The test items are decided focused on the verification of the perofrmace and acquirement of the technical data of the high speed rail system development. The running time and distance of the train are calculated for several limited maximum speed cases. The detailed test scenario shall be developed according to the process of development and design of the system.