• 한국지반공학회논문집
• /
• 제39권12호
• /
• pp.103-114
• /
• 2023

흙막이 현장에서 계측은 굴착으로 인한 지보재와 지반의 안정성 확인을 위해 필수적으로 수행해야 하는 중요한 요소이다. 특히, 굴착지반에서 전달되는 버팀대의 하중 전달 추이를 확인하는 하중계는 정확도 유지가 필수적이다. 그러나, 건설 현장에서는 하중계의 정확도를 파악할 수 있는 검증 방법, 규정 등의 연구가 부족하여 제대로 된 성능검사 없이 설치됨에 따라 문제가 되고 있다. 본 연구에서는 국내 현장에 사용되는 하중계를 전수조사하여 성능검사를 실시하고 외국 제품과의 비교를 통해 불량 원인을 파악하였다. 하중계의 성능검증을 통해 성능검사 기준을 제시하였으므로 본 연구 결과는 신뢰성 높은 하중계를 선택하는 데 도움이 될 것으로 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.

• 한국물환경학회지
• /
• 제35권4호
• /
• pp.370-378
• /
• 2019

In the recent years, various studies have presented stable and economic methods for increased regulations and compliance in sewage treatment plants. In some sewage treatment plants, the effluent concentration exceeded the regulations, or the effluent concentration was manipulated. This indicates that the process is currently inefficient to operate and control sewage treatment plants. The operation and control method of sewage treatment plant is mathematically dealing with a physical and chemical mechanism for the anticipated situation during operation. In addition, there are some limitations, such as situations that are different from the actual sewage treatment plant. Therefore, it is necessary to find a more stable and economical way to enhance the operational and control method. AI (Artificial Intelligence) technology is selected among various methods. There are very few cases of applying and utilizing AI technology in domestic sewage treatment plants. In addition, it failed to define specific definitions of applying AI technologies. The purpose of this study is to present the application of AI technology to domestic sewage treatment plants by comparing and analyzing various cases. This study presented the AI technology algorithm system, verification method, data collection, energy and operating costs as methods of applying AI technology.

• 정보보호학회논문지
• /
• 제28권4호
• /
• pp.827-838
• /
• 2018

2014년도부터 금융권의 규제가 완화됨으로써 간단한 인증만으로 대금을 결제 할 수 있는 모바일 간편결제 시장이 확대되어 다양한 간편결제 서비스가 등장하고 있다. 모바일 간편결제 애플리케이션의 보안 위협을 막기 위해 여러 검증 기능을 가진 보안 솔루션들이 애플리케이션에 적용되었지만, 보안 솔루션의 적용 구조상 취약점은 여전히 발생할 수 있다. 본 논문에서는 간편결제 애플리케이션과 보안 솔루션을 프로세스 관점에서 분석하여, 검증 결과 값을 변조하는 것만으로도 각 보안 기능의 상세 분석 없이도 보안 솔루션의 검증 기능을 쉽게 우회 할 수 있음을 실제 간편결제 애플리케이션들을 대상으로 한 실험을 통해 증명한다. 그리고 본 논문에서 제시한 우회 방법의 대응방안을 세 가지 시점으로 나누어 제시함으로써 국내 간편결제 서비스의 보안성을 향상시킬 수 있도록 기여한다.

• 한국기후변화학회지
• /
• 제9권1호
• /
• pp.81-90
• /
• 2018

"The Framework Act on Low-Carbon Green Growth" specifies the requirements for the development and verification of emission factors for establishing reliable national greenhouse gas statistics. The scope of the regulations covers the development and validation of energy, industrial processes, solvents and other product use, agriculture, land use, land use change and emission and absorption coefficients of the forestry and waste sector as defined in the 1996 IPCC Guideline and GPG 2000, The minerals sector to be covered in this study belongs to industrial processes. As a representative method for quantifying and evaluating GHG emission factors, there are emission grade quality grading and DARS (Data Rating Rating System) in the 'Procedures for Preparing Emission Factor Documents (1997)' reported by US-EPA. However, the above two methods are not specific and comprehensive, and lack the details for accurate emission factor verification. Therefore, there is a need for a method for verifying and quantifying certified greenhouse gas emission factors that reflects characteristics of each industry sector in Korea and accord with IPCC G/L and GHG target management. In this study, we conducted a weighted study on quantitative and evaluation lists of emission factor using questionnaires to develop a more accurate methodology for quantifying national greenhouse gas emission factors in the mineral sector. Quantification and evaluation of emission factor are classified into essential verification and quality evaluation. The essential verifications are : administrative compatibility, method of determining emission factors, emission characteristics, sampling methods and analysis methods, representativeness of data. The quality evaluations consisted of the quality control of the data, the accuracy of the measurement and analysis, the level of uncertainty, not directly affect the emission factor, but consisted of factors that determine data quality.

• KIEAE Journal
• /
• 제15권5호
• /
• pp.35-46
• /
• 2015

Purpose: This study is to research how New-Hanok R&D technologies of first stage are appearing and adapted to the New-Hanok style public buildings, especially in Daycare Center in Sunchang-gun, Korea. Unlike Hanok houses, public buildings which has special needs for the public and restricted by laws and regulations need not only new system of law incentives but also new components of New-Hnaok R&D technologies used only in Hanok house. Method: For this purpose, we checked the drawings for Daycare Center in Sunchang-gun. The drawings have been changed 6 times for the purpose of adopting New-Hanok R&D technologies of first stage and actual needs for current laws and regulations for public buildings and it reveals not only the possibilities for adapting new technologies in New-Hanok but also meetings the current and public needs for public buildings. Result: The result of this study as follows. Approximately 40-50 percent of New-Hanok R&D technologies in the first stage are adapted in Daycare Center in Sunchang-gun, and this means there are limitations in adapting New-Hanok R&D which are mainly for the Korean style houses. The main reasons are the costs still remaining high and lacking in confidence for using traditional structures and materials still under verification. Some are changed and proposed in another solutions suitable for public buildings as like truss structure system in roof.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2057-2066
• /
• 2016

An extension of the one-cycle control (OCC) method for switched-capacitor (SC) converters is proposed in this paper, featuring a fast dynamic response, wide line and load operation ranges, and simplicity in implementation. To illustrate the operation principle of this nonlinear control method and to demonstrate its simplicity in design, a dual-phase unity gain SC converter is examined. A new control loop based on the charge balance in a flying capacitor is formulated for the OCC technique and implemented with a 15W dual-phase unity gain SC converter on a circuit board for control verification. The obtained experimental results show that external disturbances can be rejected in one switching cycle by the OCC controlled SC converter with good line and load regulations. When compared to other control methods, the proposed nonlinear control loop exhibits superior dynamic performance in suppressing input and load disturbances.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1143-1147
• /
• 2010

The verification of the seismic performance of many urban railway bridges will be done or is done by the regulations of "Seismic Performance Evaluation Methods(Tips) of Existing Bridges" developed by KISTEC in 2004. This present process may involve some of the issues such as the unreflecting of the characteristics of the urban railway bridge and the appearance of ductility-based seismic design method. In this paper, the new and improved seismic performance evaluation system is proposed.

• Environmental Engineering Research
• /
• 제23권4호
• /
• pp.397-405
• /
• 2018

As regulations governing the control of volatile organic compounds (VOCs) have become increasingly stringent in China, regenerative thermal oxidizers (RTOs) have been more frequently applied in medium- and high-concentration VOCs treatments. However, due to the lack of existing RTO-related research, experience remains a dominant factor for industrial application. This paper thus aimed to establish a model for industrial RTOs, using a transient simulation method and thermal equilibrium model to simulate the internal velocities and temperature distributions of an RTO across multiple cycles. A comparison showed an error of less than 5% between most correlating simulated and experimental measurement points, verifying that the simulation method was accurate. After verification, the velocity and temperature fields inside the RTO were simulated to study the uniformity of temperature and velocity within the packed beds: both fields displayed high uniformity after gas flowed through the honeycomb regenerator. The effects of air volume, VOCs concentrations, and valve switching times on the oxidation chamber temperature, RTO outlet temperature, and thermal efficiency (as well as their averages) were studied. The VOCs removal rate in this study was constantly above 98%, and the average thermal efficiency reached 90%.

• 산업경영시스템학회지
• /
• 제44권1호
• /
• pp.17-25
• /
• 2021

Ammunition Demilitarization facility (ADF) should be set up the feasible goals and continue to operate, taking into account non-profit characteristics. However, due to the lack of performance measurement methods in ADF, which are essential to national policy at a significant cost each year, the reliability of the evaluation results can be insufficient. In this paper, the Balanced Score Card (BSC) method was applied that could be evaluated to reflect the financial and non-financial features. The relevant literature research and army regulations reflected the results of various interviews of the expert group. The extraction of success performance area in ADF was confirmed using the BSC method and the Decision Variable (DV) candidate was created to use regression for selecting the DV. Additionally, the key performance indicator was presented by verification the feasibility of content by conducting the survey of experts. The implications of this paper are as follows. First, the proposed BSC model was found to be suitable for practical use in ADF reflecting the non-profit characteristics. Second, accurate evaluation of ADF can contribute to long-term development of ADF. Finally, it can be applied to the management process of the other military sector, so it can be expected to play a role in providing basic data and spreading it to other areas.